Robotime DG102 Sam's Study DIY Miniature House Kit

1. Introduction

Thank you for choosing the Robotime DG102 Sam's Study DIY Miniature House Kit. This kit provides an engaging and creative experience, allowing you to construct a detailed miniature replica of a cozy study. Designed to stimulate creativity, manual dexterity, and patience, this educational toy is composed of safe materials suitable for assembly by individuals aged 3 years and above, with adult supervision recommended for younger users due to small parts.

Image 1.1: Fully assembled Robotime DG102 Sam's Study miniature house.

2. Safety Information

• Small Parts Warning: This kit contains small parts which may pose a choking hazard for children under 3 years of age. Adult supervision is highly recommended during assembly, especially when children are involved.
• Sharp Edges: Some components may have sharp edges or points before assembly. Handle with care to avoid injury.
• Adhesive Use: The kit includes adhesive. Use glue in a well-ventilated area. Avoid contact with eyes and skin. In case of contact, rinse thoroughly with water. Keep out of reach of small children.
• Tools: If using additional tools (e.g., scissors, tweezers, craft knife), ensure they are used safely and stored properly.
• Disposal: Dispose of all packaging materials and unused components responsibly.

3. Package Contents

Before beginning assembly, please verify that all components listed below are present in your kit. Refer to the included instruction booklet for a detailed parts list and diagrams.

Image 3.1: Overview of kit components.

Image 3.2: Contents as packaged within the box.

• Pre-cut wooden sheets for structural components and furniture.
• Printed paper sheets for wallpaper, books, and decorative elements.
• Fabric pieces for upholstery and soft furnishings.
• Small plastic or metal accessories (e.g., miniature frames, lamps).
• LED lights and wiring (if applicable for lighting features).
• Adhesive (glue).
• Paintbrush or applicator.
• Detailed instruction booklet with diagrams.

4. Setup and Assembly Instructions

Assembly of the Robotime DG102 kit requires patience and attention to detail. Follow the step-by-step instructions and diagrams provided in the included booklet carefully. The general assembly process is outlined below:

1. Preparation:
   • Unpack all components and organize them by type or step as indicated in the instruction booklet.
   • Ensure you have a clean, well-lit workspace.
   • Gather any additional tools you might need (e.g., small scissors, tweezers, ruler, craft knife).
2. Base Assembly:
   • Assemble the base structure according to the diagrams. This typically involves interlocking wooden pieces.
   • Apply wallpaper or flooring elements to the base as instructed.
3. Wall and Structure Assembly:
   • Construct the walls and main structural elements. Pay close attention to the orientation of each piece.
   • Secure components using the provided adhesive. Allow sufficient drying time for each section before proceeding.
4. Furniture and Decorative Elements:
   • Assemble the miniature furniture pieces (e.g., bookshelves, chairs, tables).
   • Cut and apply paper elements like books, pictures, and other decorations.
   • Attach small accessories to their designated places.
   

   Image 4.1: Detailed view of assembled furniture and decorations.

5. Lighting Installation (if applicable):
   • If your kit includes LED lights, carefully follow the wiring diagrams to install them.
   • Ensure all connections are secure and hidden as much as possible.
   • Test the lights before fully sealing any sections.
6. Finishing Touches:
   • Add any remaining small details, such as plants, rugs, or final decorative items.
   • Ensure all parts are securely glued and the structure is stable.

Note: The instruction booklet provided with your kit contains specific, detailed diagrams and step-by-step guidance for each component. Always refer to it for precise assembly.

5. Operating (Display and Handling)

Once assembled, your Robotime DG102 Sam's Study miniature house is ready for display. Treat it as a delicate decorative item.

• Placement: Place the miniature house on a stable, flat surface away from direct sunlight, excessive heat, or humidity to prevent material warping or fading.
• Handling: Always lift the model from its base. Avoid applying pressure to delicate parts or pulling on small accessories.
• Lighting: If your model includes LED lights, ensure the battery compartment (if applicable) is easily accessible for battery replacement. Turn off lights when not in use to conserve battery life.

Image 5.1: The assembled miniature house in a display setting.

6. Maintenance

• Cleaning: Dust the miniature house gently with a soft, dry brush or a microfiber cloth. Avoid using water or chemical cleaners, as they may damage the materials or paint.
• Repairs: If any small parts detach, reattach them carefully using a suitable craft adhesive.
• Storage: If storing the model, place it in a sturdy box to protect it from dust and physical damage.

7. Troubleshooting

8. Specifications

9. Warranty and Support

ROBOTIME products are manufactured with quality and care. For any questions regarding missing parts, assembly difficulties, or product defects, please contact the retailer where you purchased the kit or visit the official ROBOTIME website for customer support information.

Please retain your proof of purchase for any warranty claims or support inquiries.