Introduction
This manual provides instructions for the safe and effective use of your Dr. Brown's Milestones Narrow Sippy Spout Bottle with Handles. This product is designed to help babies transition from bottle feeding to sippy cup use, featuring a soft silicone sippy spout and easy-grip handles.
Important Safety Information
- Always supervise your child during feeding.
- Never use feeding nipples as a soother.
- Continuous and prolonged sucking of fluids will cause tooth decay.
- Always check food temperature before feeding.
- Inspect all components before each use. Discard at the first sign of damage or weakness.
- Keep all components not in use out of reach of children.
- Do not heat in a microwave oven, as this may cause localized overheating and scald your baby.
- Do not allow your child to walk or run with the bottle.
Setup and Assembly
Your Dr. Brown's Milestones Narrow Sippy Spout Bottle with Handles comes with several components designed for easy assembly and transition.
- Initial Cleaning: Before first use, disassemble all parts and clean thoroughly. Refer to the "Cleaning and Maintenance" section for detailed instructions.
- Assemble the Bottle:
- Ensure the internal vent system is removed from your Dr. Brown's Options+ Narrow Bottle. The sippy spout is designed for use without the vent system.
- Place the soft silicone sippy spout into the collar.
- Screw the collar with the sippy spout onto the bottle.
- Slide the 100% silicone easy-grip handles onto the bottle. The handles are removable and can be adjusted for your baby's comfort.
- Attach the snap-on cap to keep the spout clean when not in use or during travel.
Image: Fully assembled Dr. Brown's Narrow Sippy Spout Bottle with Handles in black.
Image: Close-up of the Dr. Brown's silicone easy-grip handles, designed to fit narrow bottles.
Image: The soft 100% silicone sippy spout, BPA-free.
Operating Instructions
The Dr. Brown's Milestones Narrow Sippy Spout Bottle is designed for easy use as your baby transitions from bottle to cup.
- Filling the Bottle: Fill the bottle with your desired liquid (water, milk, juice) up to the indicated measurement marks. Do not overfill.
- Securing the Spout: Ensure the sippy spout is securely fastened to the collar and the collar is tightly screwed onto the bottle to prevent leaks.
- Offering to Baby: Present the bottle to your baby. The easy-grip handles are designed for small hands to hold independently.
- Travel: Use the snap-on cap to cover the sippy spout when traveling to maintain hygiene and prevent spills.
Image: A baby holding and drinking from the Dr. Brown's Sippy Spout Bottle with handles.
Image: The sippy spout bottle with its snap-on cap, highlighting its travel-friendly design and dishwasher/sterilizer safe features.
Cleaning and Maintenance
Proper cleaning and maintenance are essential for hygiene and extending the life of your Dr. Brown's Sippy Spout Bottle.
Disassembly for Cleaning:
- Unscrew the collar and remove the sippy spout.
- Remove the silicone handles from the bottle.
- Separate all components for thorough cleaning.
Cleaning Instructions:
- Dishwasher Safe: All parts are safe for cleaning on the top rack of a dishwasher.
- Hand Washing: Wash all parts with warm, soapy water. Use a bottle brush for the interior of the bottle and a small brush for the sippy spout to ensure all residue is removed.
- Rinsing: Rinse all components thoroughly with clean water.
- Sterilization: All parts are sterilizer safe. You can use a steam sterilizer or boil components in water for 5 minutes.
- Drying: Allow all parts to air dry completely before reassembling or storing to prevent mold or mildew growth.
Image: Dr. Brown's Milestones Sippy Bottle, illustrating its components for easy cleaning.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Leaking from the collar/spout area | Spout not properly seated, collar not tightened, or damaged spout. | Ensure the sippy spout is fully inserted into the collar. Tighten the collar firmly onto the bottle. Inspect the spout for tears or damage and replace if necessary. |
| Liquid not flowing easily | Spout clogged or baby not accustomed to sippy spout. | Clean the sippy spout thoroughly to remove any blockages. Encourage baby to suck gently on the spout. Ensure the vent system is removed from the bottle. |
| Handles slipping off | Handles not correctly positioned or bottle surface is wet/oily. | Ensure the handles are dry and correctly aligned with the bottle's shape. The handles are designed to fit snugly. |
Specifications
- Brand: Dr. Brown's
- Model: Narrow Sippy Spout Bottle with Handles
- Capacity: 8 ounces (250 mL)
- Material: BPA Free (Bottle and Silicone Handles/Spout)
- Age Range: 6 months and up
- Cleaning: Dishwasher safe (top rack), Sterilizer safe
- Included Components: Dr. Brown’s Narrow Transitional Sippy Bottle with Silicone Handles 8oz 250mL Black 1-Pack
- Item Weight: 0.12 kg
Image: Diagram showing the dimensions of the Dr. Brown's Sippy Spout Bottle: 8.3 inches (21.1 cm) height, 5 inches (12.7 cm) width.
Warranty and Support
For warranty information or product support, please refer to the official Dr. Brown's website or contact their customer service directly. Keep your purchase receipt as proof of purchase.
Visit the official Dr. Brown's Store for more information: Dr. Brown's Store