Intermatic Cycle Timer Clock ON/Off Plastic Switch Trippers

Introduction

These Intermatic Cycle Timer Clock ON/Off Plastic Switch Trippers are designed to replace or supplement the trippers for various Intermatic mechanical timers. They enable precise scheduling of ON and OFF cycles for your connected devices, ensuring automated control over lighting, appliances, and other electrical equipment.

Product Overview

This package includes 4 red OFF trippers and 4 green ON trippers. These trippers are essential components for programming the timing cycles on compatible Intermatic mechanical timers. The red trippers are used to designate the time when the connected device should turn OFF, while the green trippers are used to designate the time when the connected device should turn ON.

Image: A clear plastic bag containing eight plastic trippers, four red and four green, with the Intermatic logo and product description printed on the bag.

Compatibility

These trippers are compatible with a wide range of Intermatic mechanical timers, including but not limited to:

• TN Series: 24-Hour Indoor Plug-in Timers (models TN111, TN111CL, TN111K, TN311, TN311K) and 24-Hour Outdoor Plug-in Timer (TN111RM40).
• P Series: Two-Circuit Portable Outdoor Timers (models P1101, P1121, P1131, P1161, P1251P, P1261P).
• PB Series: 24-Hr 120V Mechanical Panel Mount Timers (models PB913N84, PB914N84).
• PF Series: Freeze Protection Timers (ONLY models PF1102T, PF1103T, PF1103MT). Note: NOT compatible with PF1112T, PF1202T, and PF1222TB1.
• HB Series: Heavy-Duty Outdoor Timers (models HB11K, HB11KD89).
• TB Series: Tabletop Lamp and Appliance Plug-in Timers (models TB211, TB211C).
• Professional Landscape Lighting Transformers/Timers: (models AL300TPWS, AL600TPWS, AL900TPWS).

Setup

To set up your Intermatic timer with these trippers, follow these general steps. Always refer to your specific Intermatic timer's instruction manual for detailed installation and programming procedures.

1. Identify Tripper Slots: Locate the slots around the timer's dial where the ON and OFF trippers are inserted. These are typically small grooves or holes designed to hold the trippers securely.
2. Determine ON/OFF Times: Decide the specific times you want your device to turn ON and OFF.
3. Insert Green ON Trippers: For each desired ON time, carefully insert a green tripper into the corresponding slot on the timer dial. Ensure it is firmly seated.
4. Insert Red OFF Trippers: For each desired OFF time, carefully insert a red tripper into the corresponding slot on the timer dial. Ensure it is firmly seated.
5. Set Current Time: Rotate the timer dial to align the current time with the indicator arrow or mark on the timer.
6. Connect Device: Plug your appliance or lighting into the timer, and then plug the timer into a power outlet.

Image: A white Intermatic timer showing a red OFF tripper and a green ON tripper inserted into its rotating dial, with magnified circles highlighting each tripper.

Image: A black Intermatic timer showing a red OFF tripper and a green ON tripper inserted into its rotating dial, with magnified circles highlighting each tripper.

Operating Instructions

Once the trippers are installed and the current time is set, the timer will automatically activate and deactivate the connected device according to the programmed ON and OFF times. The mechanical nature of these timers means they will continue to operate as long as they are powered and the trippers are correctly positioned.

• Green Trippers (ON): When the timer's internal mechanism reaches the point where a green tripper is inserted, it will trigger the connected device to turn ON.
• Red Trippers (OFF): When the timer's internal mechanism reaches the point where a red tripper is inserted, it will trigger the connected device to turn OFF.
• Adjusting Times: To change the ON/OFF times, simply remove the existing trippers and reinsert them into the desired time slots on the dial.
• Manual Override: Many Intermatic timers include a manual override switch. Refer to your specific timer's manual for instructions on how to use this feature, which allows you to temporarily bypass the programmed schedule.

Maintenance

These plastic switch trippers require minimal maintenance. Proper care will ensure their longevity and reliable operation.

• Cleaning: If trippers become dirty, gently wipe them with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials, which could damage the plastic.
• Storage: When not in use, store spare trippers in a cool, dry place, away from direct sunlight and extreme temperatures. Keeping them in their original packaging or a small container can prevent loss.
• Inspection: Periodically inspect the trippers for any signs of wear, cracks, or damage. Damaged trippers may not seat properly in the timer and could lead to unreliable operation. Replace any damaged trippers promptly.

Troubleshooting

If you encounter issues with your timer's operation related to the trippers, consider the following common troubleshooting steps:

• Timer Not Activating/Deactivating:
  • Ensure the trippers are securely inserted into the correct slots on the timer dial.
  • Verify that the red (OFF) and green (ON) trippers are placed at the desired times and are not loose.
  • Check if the timer's current time is correctly set and aligned with the indicator.
  • Confirm the timer itself is receiving power and functioning correctly (e.g., the dial is rotating).
• Trippers Falling Out:
  • Inspect the trippers for any physical damage or deformation that might prevent them from seating properly.
  • Examine the tripper slots on the timer for any debris or damage.
  • Ensure trippers are pushed in completely until they click or feel secure.
• Inconsistent Operation:
  • Confirm that no other objects or debris are obstructing the movement of the timer's internal mechanism or the trippers.
  • Ensure the timer is installed in an environment within its specified operating temperature range.

If problems persist after attempting these steps, consult the specific instruction manual for your Intermatic timer model or contact Intermatic customer support.

Specifications

Image: A close-up view of the eight individual plastic trippers, showing their distinct red and light blue colors and hook-like design for insertion into timer dials.

Warranty and Support

For specific warranty information regarding Intermatic products, please refer to the documentation included with your Intermatic timer or visit the official Intermatic website. For technical assistance, product inquiries, or to report issues, please contact Intermatic customer service directly.

Intermatic Official Website: www.intermatic.com