Introduction
The Lasko 18-inch Oscillating Wall-Mount Fan (Model M18950) is designed to provide powerful and efficient air circulation for various indoor spaces. This fan features three quiet speeds, a tilt-back head, and optional oscillation to direct airflow precisely where needed. It includes a convenient remote control for easy operation and a timer function for automatic shut-off. Its wall-mount design helps optimize floor and table space, making it an ideal cooling solution for bedrooms, workshops, garages, and living rooms.
Important Safety Information
Please read and save these instructions before using this fan. Failure to follow these instructions may result in electric shock, fire, or injury.
- Always unplug the fan before cleaning, servicing, or relocating.
- Do not operate the fan with a damaged cord or plug.
- Keep fingers and other objects away from the fan blades and grille during operation.
- Ensure the fan is mounted securely to a wall stud using appropriate hardware.
- Do not use the fan in wet or damp locations, such as bathrooms or laundry areas.
- This fan is equipped with a safety fuse plug. Do not remove or tamper with the plug.
Package Contents
- Lasko 18-inch Oscillating Wall-Mount Fan (M18950)
- Remote Control
- Mounting Bracket
- Screws for mounting
- Instruction Manual
Setup and Installation
The fan is designed for easy assembly and wall mounting. Ensure you have a sturdy wall stud for secure installation.
- Unpack the Fan: Carefully remove all components from the packaging.
- Assemble the Fan Head: If the fan blades and grilles are not pre-assembled, follow the instructions provided in the quick start guide to secure them. Ensure all parts are tightly fastened.
- Select Mounting Location: Choose a location on a wall that has a stud. Use a stud finder to locate a suitable mounting point. The fan should be mounted at a height that allows for optimal air circulation and safe operation.
- Attach Mounting Bracket: Position the mounting bracket against the wall stud. Use the supplied screws to securely fasten the bracket to the wall. Ensure the bracket is level before tightening all screws.
- Mount the Fan: Align the fan unit with the mounted bracket and secure it using the provided hardware. The fan should slide onto the bracket and be tightened with the included knobs or screws to prevent movement.
- Plug In: Once securely mounted, plug the 5 ft. electric cord into a standard 120V AC outlet. The cord hangs from the bottom of the unit for convenience.
Figure 1: Lasko 18-inch Wall-Mount Fan showing the mounting bracket.
Operating Instructions
The Lasko Wall-Mount Fan can be operated using the controls on the unit or the included remote control.
Controls on Unit:
- Power On/Off: Press the power button to turn the fan on or off.
- Speed Adjustment: Use the rotary dial or pull cord (if applicable) to cycle through the three speed settings: Low, Medium, and High.
- Oscillation: Manually turn the oscillation feature on or off by pressing the oscillation button. The fan will rotate up to 90 degrees to cover a wider area.
- Tilt Adjustment: The fan head can be tilted up or down to direct airflow. Adjust the head to your desired angle.
Remote Control:
The remote control provides convenient access to all fan functions from a distance.
- Power Button: Turns the fan on or off.
- Speed Button: Cycles through the three fan speeds.
- Oscillation Button: Activates or deactivates the oscillation function.
- Timer Button: Sets the fan to automatically shut off after a predetermined time (e.g., 1, 2, or 4 hours).
Figure 2: Lasko 18-inch Wall-Mount Fan with its remote control.
Maintenance
Regular maintenance ensures optimal performance and longevity of your fan.
- Cleaning: Unplug the fan before cleaning. Use a soft, damp cloth to wipe the exterior surfaces. The fan can be removed from the bracket for easier cleaning of the blades and grilles. Do not use abrasive cleaners or solvents.
- Storage: When not in use, store the fan in a cool, dry place. It is recommended to cover the fan to protect it from dust.
Troubleshooting
If your fan is not operating as expected, refer to the following common issues and solutions:
- Fan Does Not Turn On:
- Ensure the power cord is securely plugged into a working electrical outlet.
- Check the household fuse or circuit breaker.
- Verify the fan's safety fuse plug is not tripped or damaged.
- Reduced Airflow:
- Clean the fan blades and grilles to remove any dust or debris buildup.
- Ensure the fan is set to a higher speed setting.
- Unusual Noise:
- Check for any loose parts or obstructions around the fan blades.
- Ensure the fan is securely mounted and not vibrating against the wall.
Specifications
| Brand | Lasko |
| Model Name | Lasko - 18" Oscillating Wall-Mount Fan W/ Remote, 3-Speed (M18950) |
| Model Number | M18950 |
| Product Dimensions | 18"D x 18"W x 18"H |
| Item Weight | 9.31 Pounds |
| Power Source | Corded Electric |
| Wattage | 55 watts |
| Voltage | 120 Volts (AC) |
| Number of Power Levels | 3 |
| Control Method | Remote, Electronic controls |
| Installation Type | Wall-Mount |
| Special Feature | Customizable, Oscillation, Tilt-back head |
| Certification | ETL Listed |
Warranty and Support
This Lasko product is backed by a 1-year limited warranty. For warranty claims or technical support, please contact Lasko customer service. Keep your proof of purchase for warranty validation.
Customer Service: For assistance, product information, or to order replacement parts, please visit the official Lasko website or contact their customer support line. Refer to the contact information provided in your product packaging.
