1. Important Safety Information
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be hazardous or fatal. Keep these instructions for future reference.
- WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing.
- WARNING: Risk of fire. Use only with specified voltage and wattage.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Ensure all electrical connections are secure and comply with local codes and ordinances.
- Do not alter or modify the fixture.
- Suitable for damp locations.
- IC Rated for direct contact with insulation.
2. Product Overview
The GLOBE ELECTRIC 91205 is a 3-inch white integrated LED recessed lighting kit designed for easy installation and efficient illumination. This ultra-slim fixture provides 370 lumens of light output with a 3000K color temperature, offering a warm white glow. Its integrated LED design ensures long-lasting performance without the need for bulb replacement.
Key Features:
- 370 lumens of light output
- 3000K color temperature (Warm White)
- Dimmable construction
- Integrated LED for 50,000 hours of illumination
- Ultra-slim design for easy installation in shallow ceilings
- IC Rated for direct contact with insulation
- Wet rated, suitable for damp locations
Package Contents:
- 1 x 3" Integrated LED Recessed Light Fixture
- 1 x Remote Driver/Junction Box with Integrated LED Connect Cable
- Installation Hardware (e.g., wire connectors)
Figure 2.1: Overview of the GLOBE ELECTRIC 91205 recessed light kit, showing the LED fixture, remote driver/junction box, and connecting cable.
Figure 2.2: Close-up view of the 3-inch integrated LED recessed light fixture.
3. Installation Instructions
Before starting, ensure the power is turned off at the circuit breaker. This fixture is designed for flush mount installation in ceilings.
Tools Required (Not Included):
- Measuring Tape
- Pencil
- Drywall Saw or Hole Saw
- Wire Strippers
- Screwdriver
Installation Steps:
- Turn Off Power: Locate the circuit breaker controlling the area where you will install the light and turn off the power. Verify power is off using a voltage tester.
- Determine Location: Choose the desired location for your recessed light. Ensure there are no obstructions (joists, pipes, wires) in the ceiling space.
- Cut Hole: Using a pencil, mark a 3.25-inch (8.25 cm) diameter hole in the ceiling. Carefully cut the hole using a drywall saw or hole saw.
- Prepare Wiring: Run electrical supply wires (live, neutral, ground) to the cut-out hole.
- Connect Junction Box: Open the cover of the remote driver/junction box. Remove the appropriate knock-out for your electrical cable. Insert the electrical supply cable into the junction box and secure it with a cable connector (not included, if required by local code).
- Wire Connections: Connect the house wiring to the wires inside the junction box using the provided push-in quick connectors or wire nuts (if preferred):
- Connect the black (Live) wire from the house to the black wire in the junction box.
- Connect the white (Neutral) wire from the house to the white wire in the junction box.
- Connect the green or bare copper (Ground) wire from the house to the green wire in the junction box.
- Secure Junction Box: Close the junction box cover and place the junction box into the ceiling opening.
- Connect Fixture: Connect the integrated LED connect cable from the fixture to the corresponding connector on the junction box. Ensure the connection is secure.
- Install Fixture: Push the spring clips on the sides of the recessed light fixture upwards. Insert the fixture into the ceiling hole. The spring clips will hold the fixture securely in place against the ceiling.
- Restore Power: Once the fixture is securely installed, restore power at the circuit breaker.
Figure 3.1: Dimensions of the recessed light fixture, showing a 3-inch (7.62cm) diameter and 0.4-inch (1cm) thickness.
Figure 3.2: Wiring connections inside the low-profile junction box using push & click quick connectors for easy installation.
4. Operating Instructions
The GLOBE ELECTRIC 91205 recessed light is designed for simple operation.
- Turning On/Off: Use a standard wall switch (not included) connected to the circuit to turn the light fixture on or off.
- Dimming: This fixture is dimmable. To utilize the dimming feature, connect it to a compatible LED dimmer switch (sold separately). Follow the dimmer switch manufacturer's instructions for installation and operation.
Figure 4.1: Example of GLOBE ELECTRIC recessed lights installed in a living room setting.
Figure 4.2: Example of GLOBE ELECTRIC recessed lights providing illumination in a kitchen.
Figure 4.3: Example of GLOBE ELECTRIC recessed lights installed in a covered outdoor entryway, suitable for damp locations.
5. Maintenance
The GLOBE ELECTRIC 91205 recessed light requires minimal maintenance.
- Cleaning: Ensure power is off before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals or abrasive cleaners, as they may damage the finish or electrical components.
- LED Longevity: The integrated LED is designed for a long lifespan (50,000 hours) and does not require bulb replacement.
6. Troubleshooting
If you experience issues with your recessed light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture Loose wiring connection Faulty switch | Check circuit breaker and wall switch. Ensure power is on. Verify all wire connections are secure (with power off). Test the switch with another device or replace if faulty. |
| Light flickers or dims inconsistently | Incompatible dimmer switch Loose wiring connection | Ensure you are using an LED-compatible dimmer switch. Check all wiring connections (with power off). |
| Light is not as bright as expected | Dimmer setting too low Incorrect voltage supply | Adjust the dimmer to its maximum setting. Verify the voltage supply to the fixture is correct (220 Volts as per specifications). |
If the problem persists after attempting these solutions, contact a qualified electrician or GLOBE ELECTRIC customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | 91205 |
| Brand | GLOBE ELECTRIC |
| Light Source Type | Integrated LED |
| Light Output | 370 Lumens |
| Color Temperature | 3000K (Warm White) |
| Wattage | 6W (Equivalent to 40W incandescent) |
| Voltage | 220 Volts |
| Dimmable | Yes |
| Fixture Diameter | 3 inches (7.62 cm) |
| Hole Cut-out Size | 3.25 inches (8.25 cm) |
| Material | Copper (internal), Plastic (shade) |
| Finish | White |
| Indoor/Outdoor Usage | Indoor (Wet Rated) |
| Certifications | ES, IC, Wet, Airtight, ETL, CEC Title 24 approved |
| Estimated Lifespan | 50,000 hours |
| Product Dimensions | 2.83 x 5.12 x 5.12 inches |
| Item Weight | 0.01 Ounces |
8. Warranty and Support
For warranty information or technical support, please contact GLOBE ELECTRIC customer service. Keep your purchase receipt as proof of purchase.
- Manufacturer: GLOBE ELECTRIC
- Contact Information: Refer to the GLOBE ELECTRIC official website or product packaging for the most current customer support details.
