1. Product Overview
The LKPower AC Adapter is designed to provide reliable power to your compatible devices. This adapter converts standard AC wall power into the DC power required by your electronic equipment, allowing for operation or battery charging. It is manufactured with high-quality materials to ensure durability and performance.
Key Features:
- High-quality replacement AC wall power charger adapter.
- Input: AC 100-240V 50/61Hz Auto (Worldwide AC Input).
- Equipped with Over Voltage Protection and Over Heat Protection for device safety.
- Tested units ensure great working condition.
Compatibility: This adapter is compatible with Degen Kaito Radios DE1126 and Tecsun models PL360, PL380, PL390, PL605, PL606.
Image 1: Front and side view of the LKPower AC Adapter, showing the two-prong plug and the barrel connector cable.
2. Setup Instructions
- Inspect the Adapter: Before use, visually inspect the AC adapter and its cable for any signs of damage. Do not use if damaged.
- Connect to Device: Locate the power input port on your Degen Kaito or Tecsun radio. Carefully insert the barrel connector of the AC adapter into this port. Ensure a snug fit.
- Connect to Power Outlet: Plug the two-prong end of the AC adapter into a standard AC wall power outlet (100-240V, 50/61Hz).
- Verify Connection: Once connected, your device should indicate that it is receiving power or charging (e.g., a charging indicator light).
Safety Precautions:
- Use only with compatible devices as specified.
- Do not expose the adapter to water or excessive moisture.
- Avoid operating in extreme temperatures.
- Do not attempt to disassemble or modify the adapter.
Image 2: The LKPower AC Adapter plugged into a power strip, which is connected to an electronic device on a desk, demonstrating typical usage.
3. Operating Instructions
Once the LKPower AC Adapter is correctly connected to your device and a power outlet, it will automatically begin supplying power. If your device has a rechargeable battery, the adapter will charge it while simultaneously powering the device. No further user action is typically required for basic operation.
- To power your device, ensure the adapter is securely plugged into both the device and a live electrical outlet.
- To charge your device's battery, leave the adapter connected until the device indicates a full charge.
- Disconnect the adapter from the wall outlet when not in use for extended periods.
4. Maintenance
Proper maintenance ensures the longevity and safe operation of your AC adapter.
- Cleaning: Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Storage: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly winding the cable to prevent damage.
- Inspection: Periodically check the cable and connectors for any signs of wear, fraying, or damage. Replace the adapter if any damage is observed.
5. Troubleshooting
If you encounter issues with your LKPower AC Adapter, refer to the following common troubleshooting steps:
- Device Not Powering On/Charging:
- Ensure the adapter is securely plugged into both the device and the wall outlet.
- Test the wall outlet with another device to confirm it is functional.
- Check the device's power input port for any obstructions or damage.
- Adapter Feels Warm:
- It is normal for the adapter to feel slightly warm during operation. If it becomes excessively hot, disconnect it immediately and contact support.
- The adapter includes Over Heat Protection, which should prevent damage from overheating.
- Intermittent Power:
- Check for loose connections at both the device and the wall outlet.
- Inspect the cable for any kinks or damage that might interrupt power flow.
If these steps do not resolve the issue, discontinue use and contact customer support.
6. Specifications
Detailed technical specifications for the LKPower AC Adapter (Model: 171211170).
Image 3: The LKPower AC Adapter showing its physical dimensions: 2.6 inches length, 1.6 inches width, and 1.2 inches height. The cable length is 76 inches.
| Feature | Specification |
|---|---|
| Brand | LKPower |
| Model Number | 171211170 |
| Input Voltage | AC 100-240V |
| Frequency Range | 50/61Hz (Auto) |
| Connector Type | Barrel Connector |
| Main Power Connector Type | 2 Pin (US Standard) |
| Compatible Devices | Degen Kaito Radios DE1126, Tecsun PL360, PL380, PL390, PL605, PL606 |
| Special Feature | Travel-friendly design |
| Adapter Dimensions (approx.) | 2.6 in (L) x 1.6 in (W) x 1.2 in (H) |
| Cable Length (approx.) | 76 inches |
7. Warranty and Support
This LKPower AC Adapter comes with a standard manufacturer's warranty. Please refer to the product packaging or contact your retailer for specific warranty terms and conditions.
For technical support, troubleshooting assistance beyond what is provided in this manual, or warranty claims, please contact LKPower customer service through their official website or the contact information provided with your purchase.