User Manual for hygger Auto On Off LED Aquarium Light

Introduction

The hygger Auto On Off LED Aquarium Light is designed to provide optimal lighting conditions for freshwater aquariums and planted tanks. It features programmable 24-hour light cycles, including simulated sunrise and sunset, and offers a full spectrum of colors to support aquatic life and plant growth. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure proper use and longevity of your device.

Key Features

• Programmable 24-Hour Light Cycle: Simulates natural sunrise, midday, sunset, and night conditions.
• Sunrise & Sunset Function: Gradual 15-minute ramp-up and ramp-down to prevent light shock to fish.
• Customizable Moonlight Mode: Offers 6 single-colored options (red, purple, blue, cyan, green, yellow) and 10 dimmable levels.
• Two Operating Modes: Default auto cycle and DIY cycle for advanced customization.
• IP68 Water-Resistant Rating: Ensures protection against splashes and water intrusion.
• Energy Efficient: Low voltage DC adapter for safe operation and reduced electricity consumption.
• Full Spectrum LEDs: Contains 38 White (6500K), 10 Blue (450-455nm), 6 Red (620-625nm), 4 Green (520-525nm), and 19 RGB LEDs for comprehensive plant growth support.
• Adjustable Mounting Legs: Compatible with aquariums ranging from 18 to 24 inches in width.

Package Contents

• hygger Aquarium Light Body
• Power Supply Adapter
• Adjustable Mounting Brackets
• User Manual (this document)

Setup Instructions

1. Unpack the Light: Carefully remove all components from the packaging. Inspect for any damage.
2. Attach Mounting Brackets: Slide the adjustable mounting legs onto the ends of the light fixture. Ensure they are securely fastened.
3. Position on Aquarium: Place the light fixture on top of your aquarium, extending the adjustable legs to fit the tank's width (18-24 inches). Ensure the light is centered and stable.
   

   Image: The hygger aquarium light securely placed on top of an aquarium, illustrating proper positioning.

4. Connect Power: Connect the power supply adapter to the light fixture's input port. Then, plug the power adapter into a standard electrical outlet.
5. Initial Power On: Upon plugging in, the light will automatically turn on in its default auto cycle mode.

Operating Instructions

The hygger aquarium light features an integrated timer control panel for easy programming. The default auto cycle sets the light to turn on at 6:30 AM and off at 11:30 PM. You can customize this schedule and light settings.

Control Panel Overview

Image: Detailed view of the control panel, showing the display, time settings, and function buttons for adjustment.

• Display: Shows current time, daylight mode, and moonlight mode settings.
• Set/Save Button: Long press to enter edit mode, short press to save settings.
• Increase Button: Adjusts program time or intensity upwards.
• Decrease Button: Adjusts program time or intensity downwards.
• Power/Light Mode Button: Long press to turn on/off. Press once to switch color. Press twice for fine tuning.

Standard Mode (Default Auto Cycle)

This mode simulates a natural 24-hour light cycle with gradual sunrise and sunset effects.

Image: Visual representation of the standard mode, showing full spectrum light during the day and customizable moonlight at night.

• Daylight Mode: Blends white, red, green, and blue LEDs for bright, full spectrum light. Includes a 15-minute sunrise and sunset ramp.
• Moonlight Mode: Provides 6 single-colored options (red, purple, blue, cyan, green, yellow) with 10 dimmable levels. Also includes a 15-minute ramp.

Image: Diagram detailing the daylight mode's gradual on/off cycle, preventing sudden light changes for fish.

Image: Diagram explaining the moonlight mode's timed operation and showing various single-color lighting options.

DIY Mode

The DIY mode allows for advanced customization of the lighting schedule with 8 separate light stages (L1-L8). For each stage, you can set the begin time, end time, and light intensity.

Image: Illustration of the DIY mode, demonstrating how to set different light intensities and durations for various periods throughout the day.

To turn off the light during a DIY stage, set the light intensity to 00 for that specific stage.

Adjusting Light Intensity

The light intensity can be adjusted in 10 levels, from 10% to 100% brightness.

Image: Examples of the light's output at various intensity settings, from dim to full brightness.

Maintenance

• Cleaning: Regularly wipe the light fixture with a soft, damp cloth to remove dust and water spots. Ensure the light is unplugged before cleaning. Do not use abrasive cleaners.
• Water Resistance: The light is IP68 water-resistant, meaning it can withstand splashes. However, it is not designed for prolonged submersion. Avoid intentionally submerging the light.
  

  Image: The light fixture shown in water, highlighting its IP68 water-resistant design.

• LED Lifespan: The LEDs are designed for long-term use, with an estimated lifespan of 30,000 hours.

Troubleshooting

Specifications

Image: Comprehensive size chart detailing specifications for various models within the HG-957 series.

Image: Detailed breakdown of LED types and their spectral output, optimized for aquatic plants.

Warranty and Support

This hygger product comes with a 1-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or any inquiries regarding your hygger aquarium light, please contact hygger customer service. Keep your purchase receipt as proof of purchase for warranty validation.

For more information, you may visit the official hygger store: hygger Official Store