1. Product Overview
The Lindby Eddie Outdoor Wall Light is a vintage-style fixture designed for outdoor use. It features a robust construction with an IP44 rating, ensuring protection against splashing water, making it suitable for various outdoor environments such as patios, gardens, and entrance areas. This light uses a single E27 bulb (not included) and supports dimmable bulbs up to 60W.
Image 1.1: Front view of the Lindby Eddie Outdoor Wall Light. The fixture features a rust-brown finish and a clear glass globe shade.
2. Safety Information
Please read these safety instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Professional Installation Recommended: Installation of this electrical product should be performed by a qualified electrician in accordance with all local and national electrical codes.
- Power Disconnection: Always disconnect power at the main circuit breaker or fuse box before attempting any installation, maintenance, or bulb replacement.
- Voltage: Ensure the power supply voltage matches the fixture's requirements (230 Volts).
- Bulb Type: Use only E27 bulbs with a maximum wattage of 60W. Do not exceed the recommended wattage.
- IP44 Rating: This fixture is rated IP44 for protection against splashing water. It is suitable for outdoor use but should not be submerged in water.
- Handling: Handle glass components with care to prevent breakage.
3. Package Contents
Verify that all components are present before beginning installation:
- Lindby Eddie Outdoor Wall Light fixture (main body, shade, glass globe)
- Mounting bracket
- Mounting hardware (screws, wall plugs)
- Instruction Manual (this document)
Note: E27 bulb is not included and must be purchased separately.
4. Tools Required
The following tools are typically required for installation:
- Screwdriver (Phillips head)
- Drill with appropriate drill bit for wall plugs
- Pencil
- Measuring tape
- Wire strippers
- Electrical tape (optional)
- Safety glasses
5. Installation Instructions
- Turn Off Power: Before starting, ensure the power supply to the installation area is completely turned off at the main circuit breaker or fuse box. Verify with a voltage tester.
- Prepare Mounting Surface: Remove the mounting bracket from the light fixture. Position the mounting bracket on the desired wall location and mark the drilling points with a pencil.
- Drill Holes and Mount Bracket: Drill holes at the marked points. Insert wall plugs if necessary. Secure the mounting bracket to the wall using the provided screws.
- Make Electrical Connections: Carefully connect the electrical wires from your wall to the corresponding wires on the light fixture. Typically, this involves connecting live (L), neutral (N), and earth (E) wires. Ensure all connections are secure and insulated. Refer to local electrical codes for proper wiring.
- Attach Fixture Body: Carefully align the light fixture body with the mounted bracket and secure it using the provided screws or fasteners. Ensure a tight seal against the wall to maintain the IP44 rating.
- Install Bulb: Insert an E27 bulb (max 60W) into the lamp holder.
- Attach Glass Shade: Carefully place the clear glass globe shade onto the fixture. Secure it using the retaining screws. Important: Tighten these screws gently and evenly to avoid cracking the glass. Do not overtighten.
- Restore Power: Once installation is complete and all components are securely in place, restore power at the main circuit breaker.
Image 5.1: Rear view of the fixture's backplate, indicating mounting points for wall attachment.
Image 5.2: Side view of the light fixture, showing the arm connecting to the wall mount, where electrical connections are made.
Image 5.3: Close-up of the screw mechanism used to secure the glass shade. Ensure even and gentle tightening.
6. Operating Instructions
The Lindby Eddie Outdoor Wall Light operates via your standard wall switch. Simply toggle the switch to turn the light on or off.
- On/Off: Use the connected wall switch to control the light.
- Dimming: If you have installed a dimmable E27 bulb and connected the fixture to a compatible dimmer switch (not included), you can adjust the light intensity.
Image 6.1: The Lindby Eddie Outdoor Wall Light illuminated, demonstrating its operational state.
7. Maintenance
- Cleaning: To clean the fixture, ensure the power is off. Wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or glass.
- Bulb Replacement: Always turn off the power before replacing the bulb. Allow the old bulb to cool completely before removing it. Unscrew the glass globe carefully, replace the E27 bulb (max 60W), and reattach the glass globe, ensuring it is securely but gently fastened.
- Inspection: Periodically inspect the fixture for any signs of wear, damage, or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply Faulty bulb Loose wiring connection | Check circuit breaker/fuse. Replace bulb. Turn off power and check wiring connections. Consult an electrician if unsure. |
| Light flickers | Loose bulb Incompatible dimmer switch Faulty wiring | Tighten bulb. Ensure dimmer switch is compatible with the bulb type. Turn off power and check wiring. Consult an electrician. |
| Glass shade is loose or falls off | Screws not tightened sufficiently Incorrectly seated glass shade | Turn off power. Carefully re-seat the glass shade and gently tighten the retaining screws evenly. Do not overtighten. |
9. Specifications
Image 9.1: Dimensions of the Lindby Eddie Outdoor Wall Light.
| Feature | Detail |
|---|---|
| Brand | Lindby |
| Model Number | 9630001 |
| Dimensions (L x W x H) | 25 x 21.5 x 26.8 cm |
| Weight | 700 g |
| Material | Glass, Metal |
| Color | Rust Brown, Transparent |
| Style | Cottage / Vintage |
| IP Rating | IP44 (Splash-proof) |
| Voltage | 230 Volts |
| Bulb Type | E27 (1 bulb required) |
| Max Wattage | 1 x 60 W |
| Special Feature | Dimmable (with compatible bulb and dimmer switch) |
10. Warranty and Support
For warranty information or technical support, please refer to the retailer where the product was purchased or visit the official Lindby website. Keep your proof of purchase for warranty claims.
