BOMAZ B07848KFN8

BOMAZ Replacement Remote Control User Manual

For Sharp Aquos Smart LED TVs: LC-32N3000U, LC-50N5000U, LC-55N7000U, LC-65N7000U

1. Introduction

This manual provides instructions for the setup, operation, and maintenance of your BOMAZ replacement remote control. This remote is specifically designed to be compatible with various Sharp Aquos Smart LED TV models, including LC-32N3000U, LC-50N5000U, LC-55N7000U, and LC-65N7000U. It offers stable performance and requires no programming for immediate use.

2. Setup

2.1. Battery Installation

  1. Locate the battery compartment on the back of the remote control.
  2. Slide the battery compartment cover downwards to open it.
  3. Insert two (2) AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
  4. Slide the battery compartment cover back into place until it clicks securely.

Note: Batteries are not included with the remote control. Please use new AAA batteries for optimal performance.

2.2. Initial Use

This replacement remote control requires no programming. Once batteries are correctly installed, it is ready for immediate use with your compatible Sharp Aquos Smart LED TV.

Front view of the BOMAZ replacement remote control

Image 1: Front view of the BOMAZ replacement remote control, showing all buttons including power, input, number pad, navigation, volume, channel, and dedicated app buttons for Netflix, Amazon, Vudu, and YouTube.

3. Operating Instructions

Point the remote control directly at your Sharp Aquos Smart LED TV. Ensure there are no obstructions between the remote and the TV's infrared receiver.

3.1. Basic Functions

  • Power (): Turns the TV on or off.
  • INPUT: Selects the input source (e.g., HDMI 1, HDMI 2, AV).
  • Number Buttons (0-9): Directly enters channel numbers.
  • Navigation Buttons (▲ ◀ OK ► ▼): Navigates menus and confirms selections.
  • BACK: Returns to the previous menu or screen.
  • EXIT: Exits the current menu or application.
  • VOL (+/-): Adjusts the volume level.
  • CH (+/-): Changes the TV channel.
  • Mute (🔇): Mutes or unmutes the TV audio.
  • Home (): Accesses the TV's main smart home screen.
  • Live TV: Switches to live television broadcast.
  • Playback Controls (Play, Pause, Stop, Rewind, Fast Forward): Controls media playback.
  • SLEEP: Sets the sleep timer for the TV.

3.2. Smart TV App Access

The remote includes dedicated buttons for quick access to popular streaming services:

  • NETFLIX: Launches the Netflix application.
  • Amazon: Launches the Amazon Prime Video application.
  • VUDU: Launches the Vudu application.
  • YouTube: Launches the YouTube application.
Back view of the BOMAZ replacement remote control, showing the battery compartment

Image 2: Back view of the BOMAZ replacement remote control, highlighting the battery compartment cover.

4. Maintenance

4.1. Battery Replacement

When the remote control's performance degrades or it stops responding, it is likely time to replace the batteries. Follow the battery installation steps in Section 2.1. Always replace both AAA batteries simultaneously with new ones.

4.2. Cleaning

To clean the remote control, gently wipe its surface with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals or excessive moisture, as this can damage the remote.

4.3. Storage

Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures. If the remote will not be used for an extended period, it is recommended to remove the batteries to prevent leakage and potential damage.

5. Troubleshooting

ProblemPossible CauseSolution
Remote control is not responding.
  • Dead or incorrectly inserted batteries.
  • Obstruction between remote and TV.
  • Remote is out of range.
  • Replace batteries with new AAA batteries, ensuring correct polarity.
  • Remove any objects blocking the line of sight to the TV's infrared sensor.
  • Move closer to the TV (within 8 meters).
Buttons are not working correctly.
  • Low battery power.
  • Dirt or debris under buttons.
  • Replace batteries.
  • Clean the remote control as described in Section 4.2.
Limited operating range.
  • Weak batteries.
  • Interference from other devices.
  • Replace batteries.
  • Ensure no strong light sources or other infrared devices are interfering.

If you continue to experience issues after attempting these troubleshooting steps, please refer to the support information in Section 7.

6. Specifications

  • Brand: BOMAZ
  • Compatible TV Models: Sharp Aquos Smart LED TVs (LC-32N3000U, LC-50N5000U, LC-55N7000U, LC-65N7000U)
  • Connectivity Technology: Infrared
  • Controller Type: Button Control
  • Power Source: 2 x AAA Batteries (not included)
  • Maximum Operating Range: 8 meters (approximately 26 feet)
  • Material: ABS Material
  • Special Features: Ergonomic design
  • Package Dimensions: 19.99 x 8 x 2.01 cm (7.87 x 3.15 x 0.79 inches)
  • Weight: Approximately 68.04 g (2.4 oz)

7. Warranty and Support

7.1. Warranty Information

This BOMAZ replacement remote control comes with a 30-day warranty from the date of purchase. This warranty covers manufacturing defects. Please retain your proof of purchase for warranty claims.

7.2. Customer Support

If you encounter any issues with your remote control or have questions not addressed in this manual, please contact the seller or retailer from whom you purchased the product. They will be able to provide further assistance and support.

© 2023 BOMAZ. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.