Introduction
This manual provides instructions for the proper setup, operation, and maintenance of your Woods 7-Day Digital Timer, Model 50008. This indoor timer is designed to automate the ON/OFF cycles of electrical devices, offering convenience and energy management.
Safety Information
Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- For indoor use only. Do not expose to water or moisture.
- Do not exceed the electrical ratings of the timer (125V, 10A, 1250W).
- Ensure the timer is securely plugged into a grounded outlet.
- Do not disassemble or modify the timer.
- Keep out of reach of children.
Product Overview
The Woods 7-Day Digital Timer features a clear LCD display and intuitive buttons for programming. Familiarize yourself with the components:
Image 1: Woods 7-Day Digital Timer, Model 50008. This image displays the front of the timer, showing the digital display and control buttons. The display shows "4:06 PM FR" and "OFF". Below the display are buttons labeled "MINUTE", "HOUR", "DAY", "PROG", "ON-OFF", and "CLOCK". A small reset button labeled "RST-RCL" is also visible. An electrical outlet is visible on the right side of the timer casing.
Control Buttons:
- MINUTE: Adjusts minutes during time setting or program setting.
- HOUR: Adjusts hours during time setting or program setting.
- DAY: Selects the day of the week during time setting or program setting.
- PROG: Enters and navigates through programming modes.
- ON-OFF: Manually overrides the timer's current state (ON/OFF/AUTO).
- CLOCK: Returns to the current time display and is used in conjunction with other buttons to set the clock.
- RST-RCL (Reset/Recall): Resets the timer to factory defaults or recalls program settings. A small pointed object (like a pen tip) is required to press this button.
Setup
1. Initial Power-Up and Reset
- Plug the timer into a standard 125V electrical outlet. The display should illuminate.
- Using a small pointed object (e.g., a pen tip), press the RST-RCL button to clear all previous settings and reset the timer. The display will show "0:00" and "MO" (Monday).
2. Setting Current Time and Day
- Press and hold the CLOCK button.
- While holding CLOCK, press the DAY button repeatedly until the correct day of the week is displayed (MO, TU, WE, TH, FR, SA, SU).
- While holding CLOCK, press the HOUR button repeatedly to set the correct hour. Pay attention to the AM/PM indicator.
- While holding CLOCK, press the MINUTE button repeatedly to set the correct minute.
- Release the CLOCK button. The current time and day are now set.
Operating Instructions
1. Programming ON/OFF Times
The timer allows for up to 20 ON/OFF programs. Each program consists of an ON time and an OFF time.
- Press the PROG button once. The display will show "1 ON" and "0:00".
- Press the DAY button repeatedly to select the desired day(s) for this program. Options include individual days, weekdays, weekends, or all 7 days.
- Press the HOUR button to set the desired ON hour.
- Press the MINUTE button to set the desired ON minute.
- Press the PROG button again. The display will show "1 OFF" and "0:00".
- Repeat steps 3 and 4 to set the desired OFF hour and minute for this program.
- To set additional programs, press the PROG button again to advance to "2 ON", and repeat the process.
- After setting all desired programs, press the CLOCK button to return to the current time display.
2. Manual Override (ON-OFF Button)
The ON-OFF button allows you to manually change the timer's output state without affecting programmed settings.
- Pressing ON-OFF cycles through three modes:
- ON: The connected device will remain ON until the next programmed OFF time.
- OFF: The connected device will remain OFF until the next programmed ON time.
- AUTO: The timer operates according to the programmed ON/OFF schedules. This is the default and recommended mode for automated operation.
Maintenance
Cleaning
To clean the timer, unplug it from the wall outlet. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
Battery Backup
This timer includes an internal battery backup to retain settings during power outages. The battery is not user-replaceable and is designed for the life of the product. If the display is blank or settings are lost frequently during power interruptions, the timer may need replacement.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Timer display is blank. | No power to the timer. Internal battery depleted. | Ensure the timer is securely plugged into a live outlet. If the problem persists, the internal battery may be exhausted, requiring timer replacement. |
| Timer does not turn ON/OFF at programmed times. | Timer is not in AUTO mode. Incorrect program settings. | Press the ON-OFF button until "AUTO" is displayed. Review and correct program settings (ON/OFF times, days). Ensure the current time and day are set correctly. |
| Settings are lost after a power outage. | Internal battery backup is depleted. | The internal battery may no longer hold a charge. The timer may need replacement. |
| Connected device does not turn ON. | Device is not plugged in correctly. Device is faulty. | Ensure the device is securely plugged into the timer. Test the device by plugging it directly into a wall outlet. |
Specifications
- Model: 50008
- Type: Indoor
- Voltage Rating: 125 V
- Amperage Rating: 10 A
- Frequency Rating: 60 Hz
- Power Rating: 1250 W
- Number of Settings: 20 ON/OFF programs
- Dimensions: 2.5 x 5.13 x 6 inches
- Item Weight: 1.6 ounces
Warranty and Support
Warranty information and specific customer support details for the Woods 7-Day Digital Timer Model 50008 are not provided in the available product data. Please refer to the product packaging or the manufacturer's official website for warranty terms and contact information.
