Introduction
Welcome to the user manual for the Traxon XB.N3.8374110 Linear LED Fixture. This guide provides essential information for the safe and efficient installation, operation, and maintenance of your Nano-Linear Allegro AC-XB36 lighting unit. Please read this manual thoroughly before proceeding with installation or operation.
Safety Information
Adherence to the following safety precautions is crucial for safe operation and to prevent damage to the fixture or injury to personnel:
- Always disconnect power before performing any installation, maintenance, or troubleshooting.
- Installation must be carried out by a qualified electrician in accordance with all local and national electrical codes.
- Do not operate the fixture if it appears damaged in any way.
- Ensure the fixture is properly grounded.
- This fixture is suitable for wet locations, as indicated on the product label.
- Do not look directly into the light source when the fixture is illuminated.
Product Overview
The Traxon XB.N3.8374110 is a high-performance linear LED fixture, part of the Nano-Linear Allegro AC-XB36 series. It is designed for various lighting applications, featuring a robust housing and an integrated LED array for efficient illumination.
Figure 1: Main view of the Traxon XB.N3.8374110 Linear LED Fixture, highlighting its sleek design and integrated power connector.
Figure 2: Full length view of the Traxon XB.N3.8374110 Linear LED Fixture, showcasing its elongated form factor.
Figure 3: Close-up of the LED array within the Traxon XB.N3.8374110 fixture, showing the individual optical lenses.
Figure 4: Detailed view of the product label for the Traxon XB.N3.8374110, displaying model number (XB.N3.8374110), input voltage options (120-127V~50/60Hz, 277V~50/60Hz), maximum input power (11W, 22W, 33W, 44W), beam angle (50°x10°), and certifications (cETLus, suitable for wet locations). The serial number is (21)GI00E1343000004.
Setup and Installation
Mounting
The fixture should be securely mounted to a stable surface using appropriate mounting hardware (not included). Ensure that the mounting location provides adequate ventilation around the unit to prevent overheating. Follow all local building and electrical codes for proper installation.
Electrical Connection
- Before making any electrical connections, ensure that the main power supply is turned off at the circuit breaker.
- Verify that the input voltage available at the installation site matches the fixture's requirements. The fixture supports 120-127V AC or 277V AC at 50/60Hz, with a maximum power consumption of 44W. Refer to the product label for specific input power settings.
- Connect the fixture's power cable to the appropriate power source. Ensure all wiring connections are secure, insulated, and comply with electrical safety standards.
- Once connections are complete, restore power and test the fixture.
Operating Instructions
The Traxon XB.N3.8374110 Linear LED Fixture is designed for straightforward operation. Once properly installed and connected to a suitable power supply, the fixture will illuminate when power is supplied to the circuit. This fixture typically does not feature user-adjustable controls and is intended for continuous operation in its installed environment.
Maintenance
Cleaning
- Always disconnect power to the fixture before cleaning.
- Wipe the exterior surfaces of the fixture with a soft, damp cloth.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or optical components.
Inspection
- Periodically inspect the fixture for any signs of physical damage, such as cracks, dents, or frayed wiring.
- Check all electrical connections to ensure they remain secure.
- Verify that mounting hardware is still tight and secure.
Troubleshooting
If you encounter issues with your Traxon XB.N3.8374110 fixture, refer to the table below for common problems and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fixture does not illuminate | No power supply Incorrect voltage Loose wiring connection Tripped circuit breaker | Check power source and ensure it is active. Verify input voltage matches fixture requirements. Inspect and secure all electrical connections. Reset the circuit breaker. |
| Dim or flickering light | Unstable power supply Voltage fluctuation Internal component issue | Ensure stable power supply. Confirm correct and consistent voltage. If problem persists, contact qualified service personnel. |
Specifications
Detailed technical specifications for the Traxon XB.N3.8374110 Linear LED Fixture:
| Specification | Value |
|---|---|
| Manufacturer | Osram |
| Part Number | XB.N3.8374110 |
| Item Weight | 9.1 pounds |
| Product Dimensions | 48 x 3.3 x 1.8 inches |
| Item Model Number | XB.N3.8374110 |
| Color | Grey |
| Finish | Grey |
| Item Package Quantity | 1 |
| Number Of Pieces | 1 |
| ASIN | B0781ZV6P7 |
| Date First Available | January 1, 2014 |
Warranty and Support
This Traxon product is covered by the manufacturer's standard warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the original purchase documentation or contact your authorized Traxon dealer.
For technical assistance, troubleshooting beyond this manual, or customer support, please reach out to your product supplier or visit the official Traxon website for contact information.