1. Introduction
The Edifier SS02 speaker stands are designed to elevate your Edifier S1000DB, S2000PRO, S1000MKII, and other compatible bookshelf speakers to an optimal listening height. These stands feature a wood grain finish and a hollowed design, allowing for optional sand filling to enhance stability and reduce unwanted resonance. Proper placement and assembly of these stands contribute to an improved audio experience.
Image 1.1: Edifier SS02 speaker stands elevating speakers in a home theater environment.
2. Package Contents
Please verify that all components are present before beginning assembly:
- 2 x Main Column (Wood Grain)
- 2 x Top Plate (Black)
- 2 x Bottom Plate (Black)
- Screws for assembly
- 8 x Foot Pads
3. Safety Information
- Ensure all screws are securely tightened during assembly to prevent instability.
- Place the assembled stands on a flat, stable, and level surface.
- Do not exceed the maximum load capacity of 15.02 kg per stand.
- Keep small parts, such as screws, out of reach of children.
- Avoid placing stands in high-traffic areas where they could be accidentally knocked over.
4. Setup and Assembly
Follow these steps to assemble your Edifier SS02 speaker stands:
- Unpack Components: Carefully remove all parts from the packaging and identify each component as listed in Section 2.
- Attach Top Plate: Align one top plate with the pre-drilled holes on the top end of a main column. Secure it using the provided screws. Tighten the screws firmly but do not overtighten.
Image 4.1: Securing the top plate to the main column with screws.
- Attach Bottom Plate: Align one bottom plate with the pre-drilled holes on the bottom end of the same main column. Secure it using the provided screws. Ensure the Edifier logo on the bottom plate faces forward if desired.
- Optional Sand Filling: The main column is hollow. For increased stability and acoustic damping, you may fill the column with dry sand or other suitable inert granular material before attaching the bottom plate. This helps eliminate resonance.
Image 4.2: View of the hollow column for optional sand filling.
- Attach Foot Pads: Apply the adhesive foot pads to the underside of the bottom plate. These pads help protect your floor and provide additional stability.
Image 4.3: Applying foot pads to the bottom plate.
- Repeat for Second Stand: Follow steps 2-5 to assemble the second speaker stand.
- Position Stands: Place the assembled stands in your desired listening area, ensuring they are on a stable and level surface.
- Place Speakers: Carefully place your speakers onto the top plates of the stands. Ensure the speakers are centered and stable.
Image 4.4: A pair of fully assembled Edifier SS02 speaker stands.
5. Operating Instructions
Once assembled and positioned, the Edifier SS02 speaker stands require no further operational steps. Their primary function is to provide a stable and acoustically optimized platform for your bookshelf speakers. Ensure your speakers are securely placed on the top plates and that the stands are not subjected to excessive force or movement.
6. Maintenance
- Cleaning: Wipe the stands with a soft, dry cloth. Avoid using abrasive cleaners or solvents that may damage the finish.
- Stability Check: Periodically check all screws to ensure they remain tight. Verify that the stands are still on a level surface and that the foot pads are intact.
- Speaker Placement: Always ensure speakers are centered and stable on the top plates to prevent accidental falls.
7. Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Stand instability or wobbling | Loose screws, uneven floor, improper assembly. | Ensure all screws are tightened. Place stands on a level surface. Re-check assembly steps. |
| Unwanted resonance or vibration | Hollow column not filled, speaker vibration. | Fill the main column with dry sand or other damping material. Ensure speakers are placed firmly on the top plate. |
| Scratches on floor | Foot pads not installed or worn out. | Ensure all foot pads are correctly installed. Replace worn foot pads if necessary. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | SS02 |
| Product Dimensions (L x W x H) | 65L x 29W x 65H centimetres (25.6 inches height) |
| Material | Engineered Wood (MDF, Wood finish) |
| Color | Brown |
| Item Weight (per pair) | 15.02 kg |
| Load Capacity (per stand) | 15.02 kg |
| UPC | 875674003653 |
| Manufacturer | Edifier |
| Country of Origin | China |
9. Warranty and Support
The Edifier SS02 speaker stands are backed by a 2-year warranty within the US and Canada. This warranty covers manufacturing defects and ensures product quality.
For technical support, warranty claims, or any inquiries regarding your Edifier SS02 speaker stands, please contact Edifier customer service through their official website or the retailer where the product was purchased. Please have your model number (SS02) and proof of purchase available when contacting support.
