1. Introduction
The Snakebyte Twin Charge X is a dual charging station designed to keep your Xbox One controllers powered and ready for use. This docking station allows for simultaneous charging of two controllers without the need for additional cables. It features LED indicators to display the current charging status and includes two rechargeable battery packs for convenience.
This manual provides instructions for the proper setup, operation, and maintenance of your Twin Charge X.
2. Package Contents
Please verify that all items are present in the package:
- 1x Snakebyte Twin Charge X Charging Station
- 2x 800 mAh Rechargeable Battery Packs
- 1x USB Charging Cable
- 1x User Manual
3. Features
- Dual charging capability for two Xbox One controllers simultaneously.
- Integrated LED charging status indicators: orange for charging, blue for fully charged.
- Design optimized to complement Xbox One consoles.
- Includes two 800 mAh rechargeable battery packs.
- Input: 5V/1.5A.
4. Setup Instructions
- Install Battery Packs: Open the battery compartment on the back of your Xbox One controller. Insert one of the included 800 mAh rechargeable battery packs into the compartment, ensuring proper orientation. Close the battery compartment cover. Repeat for the second controller.
- Connect Charging Station: Connect the provided USB charging cable to the micro-USB port on the back of the Twin Charge X docking station. Plug the other end of the USB cable into a compatible USB power source (e.g., Xbox console USB port, USB wall adapter, PC USB port).
- Place Controllers: Gently place your Xbox One controllers onto the charging contacts of the docking station. Ensure the controllers are seated correctly for the charging process to begin.
The Snakebyte Twin Charge X dual charging station, shown with two white Xbox One controllers docked and two rechargeable battery packs in the background. This image illustrates the complete product setup.
A close-up view of the two 800 mAh rechargeable battery packs included with the Snakebyte Twin Charge X, ready for installation into Xbox One controllers.
5. Operating Instructions (Charging)
Once controllers are correctly placed on the docking station and the station is powered, the LED indicators will provide charging status:
- Orange LED: Indicates that the controller's battery pack is currently charging.
- Blue LED: Indicates that the controller's battery pack is fully charged.
The charging process is designed to prevent overcharging, allowing you to leave controllers docked without concern.
A detailed view of the LED charging status indicator on the Snakebyte Twin Charge X, which illuminates to show the charging status of the docked controllers.
6. Compatibility
The Snakebyte Twin Charge X is compatible with the following Xbox One controller models:
- Xbox One Wireless Controller (Generation 1)
- Xbox One S Wireless Controller
- Xbox One X Wireless Controller
- Xbox One Elite Wireless Controller
Important Note: The Twin Charge X is NOT COMPATIBLE with Xbox Wireless Controllers of the Xbox Series X/S generation. Xbox Wireless controllers of the Xbox One generation typically have two buttons in the middle of the controller, while Xbox Wireless controllers of the Series X/S generation have three buttons in the middle.
A visual chart detailing the compatibility of the Snakebyte Twin Charge X with Generation 1 Xbox Wireless Controllers and the Twin Charge SX with Generation 2 Xbox Wireless Controllers, highlighting the difference in button layout.
7. Troubleshooting
If you encounter issues with your Twin Charge X, please refer to the following common solutions:
- Controller Not Charging:
- Ensure the USB cable is securely connected to both the charging station and the power source.
- Verify that the battery packs are correctly installed in the controllers.
- Confirm that the controllers are properly seated on the charging contacts of the docking station. The LED indicator should illuminate orange.
- Try using a different USB port or power adapter to rule out issues with the power source.
- LED Indicator Not Lighting Up:
- Check all cable connections.
- Ensure the power source is active.
- Reseat the controller on the charging contacts.
8. Specifications
- Model Number: SB911743
- Input: 5V/1.5A
- Battery Capacity: 2x 800 mAh Lithium Polymer (included)
- Product Dimensions: 7.48 x 2.56 x 4.72 inches
- Item Weight: 12.32 ounces
- Manufacturer: Snakebyte
- Date First Available: December 13, 2017
9. Safety Information
Please read and follow these safety guidelines to ensure safe operation and prolong the life of your device:
- Do not expose the device to water or excessive moisture.
- Avoid extreme temperatures.
- Do not attempt to disassemble or modify the device.
- Keep out of reach of children.
- Use only the provided or a certified compatible USB cable and power source.
10. Warranty and Support
For warranty information and customer support, please refer to the documentation included with your product or visit the official Snakebyte website. Keep your proof of purchase for warranty claims.
