Coaster Home Furnishings 503929 Everly Reversible Sleeper Sectional Sofa User Manual

Introduction

Thank you for choosing the Coaster Home Furnishings 503929 Everly Reversible Sleeper Sectional Sofa. This manual provides essential information for the proper assembly, operation, and maintenance of your new furniture. Please read it thoroughly before beginning assembly or use.

This versatile sectional sofa features a bold black base and soft grey cushions, designed to offer both comfort and contemporary style. It easily converts into a bed, providing a convenient sleeping solution for overnight guests, and includes a built-in chaise for comfortable lounging.

Image: The Everly Reversible Sleeper Sectional Sofa in its standard configuration, featuring grey fabric cushions and a black faux leather base, with the chaise on the left side.

Safety Information

• Always follow assembly instructions carefully.
• Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as needed.
• Do not stand on the sofa or chaise.
• Keep small parts away from children during assembly to prevent choking hazards.
• Do not exceed the recommended weight capacity. This sofa is designed for seating up to 3 individuals.
• Be cautious when converting the sofa to a sleeper and back, ensuring no body parts are in the way of moving mechanisms.

Package Contents

Before beginning assembly, verify that all parts are present and accounted for:

• One (1) Sectional Sofa (consisting of main sofa unit and chaise unit)
• Assembly Hardware (bolts, screws, washers, Allen wrench)
• Instruction Manual

If any parts are missing or damaged, please contact Coaster Fine Furniture customer support.

Setup and Assembly

Assembly is required for this sectional sofa. It typically arrives in two large boxes: one for the chaise lounge and one for the main sofa part. The process is designed to be straightforward.

Step-by-Step Assembly:

1. Unpack Components: Carefully remove all parts from their packaging. Lay them out on a soft, clean surface to prevent scratches.
2. Attach Feet: Locate the sofa feet and screw them securely into the designated holes on the bottom of both the main sofa unit and the chaise unit.
3. Connect Sofa and Chaise: Align the main sofa unit with the chaise unit. There are brackets designed to connect the two pieces. Slide the units together until the brackets interlock securely. The chaise is reversible and can be attached to either the left or right side of the main sofa unit without the need for tools.
4. Attach Armrests: The armrests typically attach to the main sofa unit. Follow the specific instructions provided in your package for securing them.
5. Position Cushions: Place the seat and back cushions onto the sofa. The back cushions may have Velcro to secure them in place.
6. Final Check: Ensure all connections are tight and the sofa is stable before use.

Image: Diagram showing the overall dimensions of the sectional sofa: 80.5 inches wide, 56 inches deep (including chaise), and 32.5 inches high.

Operating Instructions

Using the Sectional Sofa:

• Seating: The sofa provides comfortable seating for up to three individuals. The plush cushions and supportive armrests are designed for casual use.
• Reversible Chaise: The chaise unit can be positioned on either the left or right side of the main sofa unit to suit your room layout. To reverse, simply detach the chaise from the main sofa, move it to the desired side, and re-connect the interlocking brackets.
• Chaise Storage: The chaise features a built-in storage compartment. Lift the top cushion of the chaise to access the spacious storage area, ideal for blankets, pillows, or other items.

Converting to Sleeper Bed:

The Everly Sectional Sofa easily converts into a comfortable sleeper bed for guests.

1. Clear the Area: Ensure there is enough clear space in front of the sofa for the sleeper mechanism to extend fully.
2. Pull Out Sleeper: Locate the handle or strap on the front of the main sofa unit, typically beneath the seat cushions. Gently pull this mechanism outwards. The sleeper platform will slide out from underneath the sofa.
3. Lift and Align: Once extended, the sleeper platform will be at a lower height than the sofa seat. Lift the front edge of the sleeper platform upwards until it locks into place, creating a continuous sleeping surface level with the sofa seat and chaise.

Image: The sectional sofa with the sleeper mechanism partially extended, showing the pull-out bed frame and the chaise storage compartment open.

Image: A closer view of the sleeper mechanism, illustrating how the pull-out section lifts to align with the main sofa seat, creating a flat sleeping surface.

Converting Back to Sofa:

1. Release Lock: Gently push down on the front edge of the sleeper platform to disengage the locking mechanism.
2. Push In Sleeper: Guide the sleeper platform back underneath the main sofa unit until it is fully retracted.

Maintenance and Care

• Cleaning Code: W/S: This indicates that the fabric can be cleaned with either water-based cleaning agents (W) or solvent-based cleaning agents (S). Always test a small, inconspicuous area first.
• General Cleaning: For routine cleaning, vacuum the fabric regularly using an upholstery attachment to remove dust and loose debris.
• Spot Cleaning: For spills, blot immediately with a clean, dry cloth. Do not rub, as this can spread the stain. For water-based stains, use a mild soap solution and a damp cloth, then blot dry. For oil-based stains, use a dry-cleaning solvent.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fabric fading. Position your sofa away from direct sunlight or use window coverings.
• Protect from Heat: Keep the sofa away from heat sources like radiators or fireplaces to prevent material damage.
• Periodically Check Hardware: Over time, screws and bolts may loosen. Periodically check all connections and re-tighten as necessary to maintain stability.

Troubleshooting

Issue: Sofa feels unstable or wobbly.

Solution: Check all assembly bolts and screws. Re-tighten any that are loose. Ensure the sofa is on a flat, even surface.

Issue: Sleeper mechanism is difficult to pull out or push in.

Solution: Ensure there are no obstructions (rugs, objects) in the path of the mechanism. Check if any parts are misaligned or if debris is caught in the tracks. Apply a silicone-based lubricant to the tracks if necessary, but avoid oil-based lubricants that can attract dust.

Issue: Cushions are shifting or not staying in place.

Solution: If cushions have Velcro, ensure it is clean and properly aligned. Fluff and rotate cushions regularly to maintain their shape and even out wear.

Specifications

Warranty and Support

Manufacturer's Warranty:

This Coaster Home Furnishings product comes with a 1 year limited warranty. This warranty covers manufacturing defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, accidents, commercial use, or unauthorized repairs.

Please retain your proof of purchase for warranty claims.

Customer Support:

For assistance with assembly, missing parts, warranty claims, or any other inquiries, please contact Coaster Fine Furniture customer support. Refer to the contact information provided with your purchase documentation or visit the official Coaster Fine Furniture website for current contact details.

When contacting support, please have your model number (503929) and proof of purchase readily available.