nanoblock NBC245 Beer Toy Instruction Manual

1. Introduction

Thank you for purchasing the nanoblock NBC245 Beer Toy. nanoblock offers micro-sized building blocks, approximately 5 mm in height, allowing you to construct detailed 3D miniature models. This kit provides all the necessary components and instructions to build an original beer mug figure.

This product is designed as a precision activity and is recommended for ages 12 and up.

2. Safety Information

WARNING: Choking Hazard - Small parts. Not suitable for children under 3 years old.

This product contains small components that could be swallowed. Adult supervision is recommended for younger users, although the product is intended for ages 12 and above.

3. Package Contents

Your nanoblock NBC245 Beer Toy kit includes:

• Approximately 180 micro-sized building blocks (including some extra pieces).
• Detailed, step-by-step assembly instructions.

Please verify that all components are present before beginning assembly. If any parts are missing, please refer to the 'Warranty and Support' section.

4. Assembly Instructions

Follow the detailed, step-by-step instructions provided in your kit to assemble the nanoblock Beer Toy. The instructions will guide you through the process of connecting the micro-sized bricks to form the complete model.

1. Preparation: Lay out all the blocks on a clean, flat surface. Organize them by color and size if helpful.
2. Follow the Manual: Refer to the included instruction booklet. Each step will show which blocks to use and where to place them.
3. Precision: Due to the small size of the blocks, precision is key. You may find tweezers helpful for placing smaller pieces accurately.
4. Secure Connections: Ensure each block is firmly pressed into place to create a stable structure.
5. Review: Periodically check your progress against the images in the instruction manual to ensure correct placement.

The assembled model will have dimensions of approximately 44 x 53 x 36 mm.

Image: nanoblock NBC245 Beer Toy packaging. This image illustrates the product packaging, displaying the finished beer mug model and the micro-sized building blocks included in the kit.

5. Operating & Display

Once assembled, the nanoblock Beer Toy is intended for display. It is a collectible item designed to be admired for its intricate detail and miniature scale.

• Place your finished model on a stable, flat surface away from direct sunlight or extreme temperatures.
• Avoid dropping or applying excessive force to the model, as this may cause blocks to detach.

6. Maintenance

To keep your nanoblock Beer Toy in optimal condition:

• Cleaning: Gently dust the model with a soft brush or a can of compressed air to remove accumulated dust.
• Deep Cleaning: If necessary, the model can be carefully wiped with a slightly damp cloth. Avoid harsh chemicals or abrasive cleaners.
• Storage: If disassembling for storage, keep all blocks in a sealed container to prevent loss.

7. Troubleshooting

If you encounter any issues during assembly:

• Missing Pieces: Double-check the packaging and your work area. If pieces are genuinely missing, please contact nanoblock customer support (refer to the 'Warranty and Support' section).
• Blocks Not Connecting: Ensure the blocks are correctly oriented and aligned. Apply firm, even pressure.
• Model Instability: Review previous steps to ensure all blocks are securely attached and no steps were missed.

8. Specifications

9. Warranty and Support

nanoblock products are manufactured to high-quality standards. For specific warranty information or support regarding missing parts or assembly issues, please visit the official nanoblock website or contact their customer service directly.

You can often find contact details or a support portal on the manufacturer's official website: www.nanoblock.com