1. Introduction
This manual provides detailed instructions for assembling your nanoblock Pokémon Ho-Oh building kit. The kit allows you to construct a miniature 3D model of Ho-Oh, the dual-type Psychic/Flying Legendary Pokémon. This model is part of Nanoblock's Pokémon Collection series.
The nanoblock system uses micro-sized building blocks, with pieces as small as 4mm x 4mm x 5mm, enabling intricate detail and realism in your creations. This kit is designed for ages 8 and up, with a difficulty level rated at 2 out of 5, making it an entry-level model.

Image: Front view of the assembled nanoblock Ho-Oh model, showcasing its vibrant red, yellow, green, white, and blue blocks.
2. What's in the Box
Before you begin assembly, please verify that all components are present in your kit. The nanoblock Pokémon Ho-Oh Building Kit includes:
- Ho-Oh [Pokémon] nanoblock pieces (approximately 183 pieces)
- Detailed step-by-step instruction manual

Image: The retail packaging for the nanoblock Pokémon Ho-Oh kit, showing the model on the front and indicating 180+ pieces and a Level 2 difficulty.
Safety Information: This product contains small parts and is considered a choking hazard. Keep out of reach of small children. Recommended for ages 8 years and up.
3. Setup and Assembly
Follow these steps to prepare for and begin assembling your nanoblock Ho-Oh model:
- Unpack Components: Carefully open the packaging and remove all nanoblock pieces and the instruction manual.
- Organize Pieces: It is recommended to sort the blocks by color and size before starting. This will simplify the building process.
- Review Instructions: Familiarize yourself with the detailed step-by-step instructions provided in the manual. Each step illustrates which blocks to use and where to place them.
- Begin Assembly: Start building from the base as indicated in the manual. Pay close attention to the orientation and connection points of each block.

Image: A nanoblock model of a plant-like creature held in a person's hand, demonstrating the small size of nanoblock creations.
Due to the small size of the blocks, precision is key. Use a flat, well-lit surface for assembly. Extra pieces are often included in case some are lost during the building process.
4. Building Process Guidelines
The assembly of your nanoblock Ho-Oh model is guided by the included instruction booklet. Each step is visually represented to ensure accurate construction.
- Step-by-Step Construction: Follow the numerical sequence of steps in the manual. Do not skip steps.
- Block Placement: Ensure each block is firmly pressed into place. Loose connections can lead to instability in the model.
- Structural Integrity: Some sections, particularly the wings and tail of the Ho-Oh model, may be delicate during construction. Handle with care to prevent accidental disassembly.
- Patience: Building nanoblock models requires patience and attention to detail. Take breaks if needed to maintain focus.

Image: Side view of the completed nanoblock Ho-Oh model, highlighting the intricate wing and tail designs.
5. Care and Display
Once assembled, your nanoblock Ho-Oh model can be displayed. To maintain its appearance and integrity:
- Cleaning: Dust the model gently with a soft brush or a can of compressed air. Avoid using water or chemical cleaners, as these may damage the blocks or cause discoloration.
- Handling: Handle the model carefully, especially by its base, to prevent delicate parts like wings and tail from detaching.
- Display Environment: Display the model on a stable, flat surface away from direct sunlight, extreme temperatures, or high humidity, which can affect the plastic over time.
- Storage: If storing the model, place it in a secure container to protect it from dust and damage.
6. Troubleshooting
Encountering issues during assembly is rare, but here are solutions to common problems:
- Missing Pieces: Check all packaging thoroughly. Nanoblock kits often include a few extra pieces. If essential pieces are still missing, contact customer support (see Section 8).
- Blocks Not Fitting: Ensure you are using the correct blocks for the current step as indicated in the manual. Verify the orientation of the blocks. Apply firm, even pressure to connect them.
- Model Instability: If parts of the model feel loose or unstable, re-examine the connections in the preceding steps. Ensure all blocks are fully seated.
- Difficulty with Small Pieces: For very small pieces, tweezers (not included) can be helpful for precise placement.
7. Product Specifications
| Product Name | nanoblock Pokémon Ho-Oh Building Kit |
| Brand | nanoblock |
| Model Number | NBPM033 (Item model number: NAN20852) |
| Number of Pieces | Approximately 183 |
| Assembled Height | Approximately 2.9 inches (7.4 cm) |
| Difficulty Level | Level 2 (out of 5) |
| Recommended Age | 8 years and up |
| Product Dimensions | 2.55 x 1.06 x 1.69 inches (packaging) |
| Item Weight | 2.1 ounces |
| Manufacturer | Nanoblock (Kawada) |
8. Warranty and Support
This nanoblock product is an officially licensed Kawada product. For customers in the U.S. Markets, products distributed by Bluefin (indicated by a Bluefin warning label on the product box) are entitled to product support assistance within the United States.
For inquiries regarding missing parts, assembly challenges, or product defects, please refer to the contact information provided on the product packaging or visit the official nanoblock website for support resources.
Important: Ensure your product has the official Bandai Namco (or Bluefin) warning label to confirm authenticity and eligibility for support.