Important Safety Information
- Always disconnect the vacuum cleaner from the power supply before attempting any installation or maintenance.
- Use appropriate tools if required for removal or installation.
- Keep small parts away from children to prevent choking hazards.
- If you are unsure about any step, consult a qualified technician or Ariete customer support.
Product Overview
This replacement wheel is an original Ariete component designed for specific Ariete Cyclonic Power Jetforce vacuum cleaner models. It ensures smooth movement and optimal performance of your appliance by replacing a worn or damaged wheel.

Setup and Installation
Follow these steps to replace the wheel on your Ariete Cyclonic Power Jetforce vacuum cleaner:
- Power Disconnection: Ensure the vacuum cleaner is completely unplugged from the electrical outlet before proceeding.
- Access the Wheel Area: Carefully turn the vacuum cleaner over or position it to gain clear access to the damaged wheel.
- Remove Old Wheel: Depending on your specific vacuum model, the old wheel may be clipped, screwed, or snapped into place. Gently pry it off or unscrew it. Observe how it was originally attached to assist with the new installation.
- Install New Wheel: Align the new Ariete replacement wheel with the mounting point on the vacuum cleaner chassis. Press firmly or secure it with screws until it clicks into place or is firmly attached. Ensure it is seated correctly.
- Verify Installation: Gently rotate the new wheel to ensure it moves freely and is securely fastened without wobbling.
Post-Installation Check
After successfully installing the new wheel:
- Place the vacuum cleaner upright on a flat surface.
- Gently push the vacuum cleaner forward and backward to confirm that the new wheel rolls smoothly and without obstruction or unusual noise.
- If any issues are observed, re-check the installation steps.
Maintenance
To ensure the longevity and optimal performance of your vacuum cleaner wheels:
- Regularly inspect the wheels for any accumulated debris such as hair, dust, or threads. These can impede movement and cause wear.
- Clean the wheels and their axles periodically using a soft, damp cloth. Ensure the area is dry before using the vacuum cleaner.
- Avoid using harsh chemicals, abrasive cleaners, or sharp objects for cleaning, as these can damage the wheel material or finish.
Troubleshooting
| Issue | Solution |
|---|---|
| Wheel does not turn smoothly or is stiff. | Check for debris (hair, dust, threads) caught in the axle or around the wheel. Clean thoroughly. Ensure the wheel is correctly installed and not obstructed by any part of the vacuum cleaner chassis. |
| Wheel detaches after installation. | Re-install the wheel, ensuring it is firmly clicked or screwed into its mounting point. Verify that the replacement wheel is compatible with your specific vacuum cleaner model. |
Specifications
| Brand | Ariete |
| Product Type | Replacement Wheel for Vacuum Cleaner |
| Dimensions (L x W x H) | 2.5 x 17 x 17 cm (approximately 1 x 6.7 x 6.7 inches) |
| Weight | 130 grams (approximately 4.6 ounces) |
| Compatible Models / Part Numbers | 00p279140ar0, 00p279123ar0, 00p279120ar0, 00p279103ar0, 00p279102arin, 00p279101arin, 00p279100arzs, 00p279100arsa, 00p279100arin, 00p279100areg, 00p279100aras, 00p279100arag, 00p279100ar0, 00p274800ar0. (Please verify your vacuum cleaner's model number on its rating plate, usually located on the underside of the appliance.) |
Warranty Information
This replacement part is subject to the warranty terms applicable to Ariete spare parts. Please refer to the original purchase documentation for your Ariete vacuum cleaner or contact Ariete customer support for specific warranty details regarding replacement components. Warranty coverage may vary based on region and purchase date.
Support and Contact Information
For further assistance, technical support, or inquiries regarding this replacement wheel, please contact Ariete customer service. Refer to your original vacuum cleaner manual for specific contact details or visit the official Ariete website for the most up-to-date support information.





