1. Introduction
This manual provides instructions for the assembly, operation, and maintenance of your La-Z-Boy Woodbury Executive Chair. Please read this manual thoroughly before assembly and use to ensure proper function and safety.
Image 1.1: Front view of the La-Z-Boy Woodbury Executive Chair.
The La-Z-Boy Woodbury Executive Chair is designed for comfort and durability, featuring ComfortCore Plus memory foam seat construction and bonded leather upholstery. It is built to support users up to 400 lbs.
2. Safety Information
WARNING: Failure to follow these safety instructions could result in injury or damage to the product.
- Ensure all bolts and screws are securely tightened before using the chair. Periodically check and re-tighten as necessary.
- Do not stand on the chair.
- Do not use the chair as a step stool.
- Do not sit on the armrests.
- Keep children away from moving parts during assembly.
- Use the chair only for its intended purpose as an office chair.
- Maximum weight capacity for this chair is 400 lbs (181.4 kg). Do not exceed this limit.
3. Package Contents
Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.
Typical package contents include:
- Chair Back
- Chair Seat
- Armrests (2)
- Base with Casters
- Gas Lift Cylinder
- Mechanism Plate
- Hardware Pack (screws, washers, Allen wrench)
4. Setup and Assembly
Assembly typically requires two people. Follow the steps below for general assembly. Refer to the specific assembly diagram included with your product for detailed instructions.
- Attach Casters to Base: Insert the casters into the holes at the end of each leg of the chair base. Push firmly until they click into place.
- Insert Gas Lift: Place the gas lift cylinder into the center hole of the assembled base.
- Attach Mechanism Plate to Seat: Align the mechanism plate with the pre-drilled holes on the underside of the chair seat. Secure with screws, ensuring the front of the mechanism faces the front of the seat.
- Attach Armrests to Seat: Secure the armrests to the sides of the chair seat using the provided screws. Do not fully tighten yet.
- Attach Backrest to Seat and Armrests: Align the backrest with the seat and armrests. Secure the backrest to the seat and armrests using the remaining screws. Once all screws are in place, tighten all armrest and backrest screws evenly.
- Connect Seat Assembly to Gas Lift: Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring the tapered end of the gas lift fits securely into the mechanism plate.
Image 4.1: The Woodbury Executive Chair assembled in an office environment.
5. Operating Instructions
Your La-Z-Boy Woodbury Executive Chair offers several adjustments for personalized comfort.
5.1. Seat Height Adjustment
To adjust the seat height:
- To raise the seat: While seated, lift the cable-actuated lever located on the right side of the chair. Shift your weight off the seat, and the seat will rise. Release the lever at the desired height.
- To lower the seat: While seated, lift the cable-actuated lever. The seat will lower under your weight. Release the lever at the desired height.
5.2. Tilt Function and Lock
The chair features a tilt function allowing the backrest and seat to recline together.
- To enable tilt: Pull out the cable-actuated lever located on the left side of the chair. The chair will now recline.
- To lock the tilt: Push in the cable-actuated lever when the chair is in the upright position.
5.3. Tilt Tension Adjustment
Adjust the resistance of the tilt mechanism using the round knob located underneath the front of the seat.
- Turn the knob clockwise to increase tilt tension (more resistance).
- Turn the knob counter-clockwise to decrease tilt tension (less resistance).
Image 5.1: Exploded view of the ComfortCore Plus memory foam seat construction, highlighting multiple layers for support and comfort.
6. Maintenance
Proper care will extend the life and appearance of your chair.
6.1. Cleaning
- For general cleaning, wipe the bonded leather upholstery with a clean, damp cloth.
- Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish.
- For spills, blot immediately with a clean, dry cloth.
- The wood arms and base can be wiped clean with a damp cloth.
6.2. Inspection
- Periodically inspect all bolts and screws to ensure they remain tight. Re-tighten as needed.
- Check casters for any debris that might hinder smooth movement. Clean if necessary.
7. Troubleshooting
If you encounter issues with your chair, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair does not raise or lower | Gas lift cylinder malfunction or lever not engaged. | Ensure the height adjustment lever is fully engaged. If the problem persists, the gas lift may need replacement. |
| Chair wobbles or feels unstable | Loose screws or uneven floor. | Check and tighten all assembly screws. Ensure the chair is on a flat, even surface. |
| Casters do not roll smoothly | Debris caught in casters or damaged casters. | Remove any hair or debris from the caster wheels. If casters are damaged, they may need replacement. |
| Chair does not tilt or tilt is too stiff/loose | Tilt lock engaged or tilt tension incorrectly adjusted. | Disengage the tilt lock lever. Adjust the tilt tension knob (under the seat) to your preference. |
8. Specifications
Image 8.1: Key dimensions of the Woodbury Executive Chair.
| Feature | Detail |
|---|---|
| Brand | La-Z-Boy |
| Model Name | Woodbury |
| Item Model Number | LZB48961A |
| Color | Black (Upholstery), Weathered Gray (Base/Arms) |
| Product Dimensions (Overall) | 30"D x 8"W x 6"H (Note: This appears to be package dimensions. Actual assembled dimensions are approximately 30"D x 27"W x 36.25"-39.25"H) |
| Seat Height Range | 20.25" to 23.25" |
| Maximum Weight Recommendation | 400 lbs (181.4 kg) |
| Upholstery Material | Bonded Leather (Faux Leather) |
| Fill Material | Memory Foam (ComfortCore Plus) |
| Arm Style | With arms (Wood finish) |
| Back Style | Solid Back |
| Special Feature | Durability, Tilt Function, Height Adjustment |
| Product Care Instructions | Wipe Clean |
| UPC | 656292489612 |
9. Warranty and Support
For specific warranty information and customer support, please refer to the documentation included with your purchase or visit the official La-Z-Boy website. Keep your proof of purchase for warranty claims.
If you require assistance with assembly, parts, or troubleshooting beyond this manual, please contact La-Z-Boy customer service.
