Coaster Fine Furniture Scott Living 100738 Dining Table
Instruction Manual
Introduction
This manual provides detailed instructions for the assembly, use, and maintenance of your Coaster Fine Furniture Scott Living 100738 Dining Table. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Image: The Coaster Scott Living 100738 Dining Table in Antique Black, showcasing its rustic craftsman style and wire-brushed finish.
Safety Information
- Always assemble the table on a soft, clean surface to prevent scratches.
- Ensure all bolts and screws are securely tightened before using the table. Periodically check and re-tighten as necessary.
- Do not exceed the maximum weight limit of 300 pounds on the tabletop.
- Keep small parts and packaging materials away from children.
- Use caution when moving the table to avoid injury or damage. Lift, do not drag.
Package Contents
Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support.
- Tabletop (1)
- Table Legs (4)
- Crossbar/Stretcher (1)
- Hardware Pack (bolts, washers, Allen wrench)
Assembly Instructions
Assembly is required for this dining table. It is recommended that two adults assemble this product.
- Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean, non-abrasive surface (e.g., a blanket or carpet) to prevent scratching.
- Attach Legs to Tabletop: Position the tabletop upside down. Align each of the four table legs with the pre-drilled holes at the corners of the tabletop. Secure each leg using the provided bolts and washers from the hardware pack. Hand-tighten initially.
- Install Crossbar/Stretcher: Locate the crossbar. Attach it between the two long sides of the table legs, ensuring it is centered and aligned with the pre-drilled holes. Secure with the remaining bolts and washers.
- Final Tightening: Once all components are in place, use the Allen wrench to fully tighten all bolts. Do not overtighten.
- Upright Position: With assistance, carefully turn the assembled table upright.
Image: Close-up view of the table leg and tabletop joint, illustrating the secure connection points.
Image: Side view of the dining table, showing the lower crossbar connecting the legs for added stability.
Usage and Operation
The Coaster Fine Furniture Scott Living 100738 Dining Table is designed for indoor dining and general household use. Its counter height design is suitable for various dining spaces.
- Weight Capacity: The table has a maximum weight limit of 300 pounds. Do not place items exceeding this weight on the tabletop.
- Placement: Place the table on a level surface to ensure stability.
- Chairs: This table is designed to be used with counter-height chairs (sold separately).
Maintenance and Care
Proper care will help maintain the appearance and longevity of your dining table.
- Cleaning: Wipe the table surface with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the antique black finish.
- Spills: Clean spills immediately to prevent staining or damage to the wood and particle board materials.
- Heat and Moisture: Use coasters and placemats to protect the surface from hot items and moisture.
- Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration.
- Periodic Checks: Periodically check all bolts and connections to ensure they remain tight. Re-tighten if necessary.
Image: Detailed close-up of the antique black, wire-brushed finish on the table's wood surface.
Troubleshooting
- Wobbling Table: Ensure all bolts are securely tightened. If the table still wobbles, check if it is placed on an uneven surface. Adjust leg levelers if present, or place shims under the legs as needed.
- Scratches/Dents: Minor scratches can sometimes be touched up with a furniture repair marker matching the antique black finish. For significant damage, professional repair may be required.
Specifications
| Feature | Detail |
|---|---|
| Brand | Coaster Fine Furniture |
| Model Number | 100738 |
| Product Dimensions | 30"D x 60"W x 36"H |
| Item Weight | 96 Pounds |
| Color | Antique Black |
| Materials | Pine Wood, Particle Board |
| Finish Type | Brushed, Antique Black |
| Maximum Weight Recommendation | 300 Pounds |
| Assembly Required | Yes |
| Seating Capacity | 4 |
Warranty and Support
Coaster Company of America warrants that its merchandise is free from manufacturing defects (workmanship and/or material) for a period of up to one (1) year from the date of purchase.
For warranty claims, missing parts, or customer support, please contact your retailer or Coaster Fine Furniture directly. Please have your proof of purchase and model number (100738) available.
