1. Introduction
Thank you for choosing the PATONA Platinum NP-W126s / NP-W126 rechargeable lithium-ion battery. This battery is designed to provide reliable power for your compatible Fujifilm cameras. It features advanced chip technology for overload protection and does not suffer from memory effect, ensuring consistent performance over its lifespan. Please read this manual carefully before use to ensure proper operation and longevity of your battery.

Image 1.1: The PATONA Platinum NP-W126s NP-W126 battery, showcasing its design and branding.
2. Safety Information
To prevent damage to the battery or injury to yourself, please observe the following safety precautions:
- Do not open, disassemble, or modify the battery.
- Keep the battery away from water, moisture, and high temperatures (above 60°C / 140°F).
- Avoid short-circuiting the battery terminals.
- Do not dispose of the battery in fire or heat.
- Keep out of reach of children.
- If the battery shows signs of damage, swelling, or leakage, discontinue use immediately.
- Dispose of used batteries according to local regulations for lithium-ion batteries. Do not dispose of with household waste.

Image 2.1: The PATONA Platinum battery displaying international safety and disposal symbols.
3. Setup
3.1 Charging the Battery
Before first use, fully charge the battery. You can charge the PATONA Platinum NP-W126s / NP-W126 battery using a compatible external charger or by inserting it into your Fujifilm camera and connecting the camera to a power source.
- Ensure the charger or camera is compatible with NP-W126s or NP-W126 batteries.
- Follow the instructions provided with your charger or camera for the charging process.
- The charging indicator on your charger or camera will typically show when the battery is fully charged.
3.2 Inserting the Battery into the Camera
To insert the battery into your camera:
- Ensure the camera is turned off.
- Open the battery compartment cover on your camera.
- Align the battery with the compartment, matching the contacts on the battery with those in the camera.
- Gently push the battery into the compartment until it clicks into place.
- Close the battery compartment cover securely.

Image 3.1: A close-up view of the PATONA Platinum NP-W126s battery, highlighting its contact points for proper insertion.
4. Operating
4.1 Compatible Camera Models
This PATONA Platinum battery is compatible with Fujifilm cameras that use NP-W126s and NP-W126 batteries, including but not limited to:
- Fujifilm FinePix HS30EXR, HS33EXR
- Fujifilm X100F, X-A1, X-A2, X-A3, X-A5, X-A7, X-A10
- Fujifilm X-E1, X-E2, X-E3, X-ES2
- Fujifilm X-H1
- Fujifilm X-M1
- Fujifilm X-Pro1, X-Pro2
- Fujifilm X-T1, X-T2, X-T3, X-T10, X-T20, X-T30, X-T100
4.2 Battery Performance
The PATONA Platinum NP-W126s / NP-W126 battery features an integrated info-chip that allows your camera to accurately display the remaining battery runtime. This ensures you are always aware of your power status during use.
- Overload Protection: The integrated chip technology protects the battery from overcharging, over-discharging, and short circuits, enhancing safety and battery life.
- No Memory Effect: This lithium-ion battery can be recharged at any time without reducing its capacity or lifespan, unlike older battery technologies.

Image 4.1: A user operating a camera, illustrating the benefit of the battery's info-chip for displaying remaining runtime.
5. Maintenance
5.1 Storage
For optimal battery health and longevity:
- Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures.
- If storing for an extended period, charge the battery to approximately 50-70% capacity. Avoid storing fully charged or completely depleted.
- Periodically check the battery during long-term storage and recharge to 50-70% if needed.
5.2 Cleaning
To clean the battery:
- Wipe the battery surface with a soft, dry cloth.
- Ensure the metal contacts are clean and free of dust or debris. Use a cotton swab if necessary.
- Do not use liquid cleaners or solvents.
6. Troubleshooting
If you encounter issues with your PATONA Platinum battery, consider the following:
- Battery not charging: Ensure the charger and camera are properly connected to a power source. Verify that the battery is correctly inserted into the charger or camera. Try a different charging method or cable if available.
- Short battery life: Battery performance can be affected by extreme temperatures. Ensure the battery is fully charged before use. Over time, all rechargeable batteries experience a decrease in capacity.
- Camera not recognizing battery: Ensure the battery is fully inserted and the compartment door is closed. Clean the battery contacts and camera contacts with a dry, soft cloth.
- Battery swelling or leakage: Immediately discontinue use and dispose of the battery safely according to local regulations. Do not attempt to charge or use a damaged battery.
7. Specifications
| Feature | Specification |
|---|---|
| Model Name | NP-W126s / NP-W126 |
| Battery Type | Lithium-ion |
| Capacity | 1140 mAh |
| Voltage | 7.2 V |
| Dimensions (L x W x H) | 47 x 36 x 16 mm |
| Weight | 50 - 51 Grams |
| Rechargeable | Yes |
| Memory Effect | No |
| Protection Features | Overload protection, Short-circuit protection |
8. Warranty and Support
8.1 Warranty Information
PATONA products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official PATONA website. Keep your proof of purchase for warranty claims.
8.2 Customer Support
If you have any questions, require technical assistance, or need to report an issue, please contact PATONA customer support:
- Manufacturer: Bundlestar
- Address: PATONA International S.L.U., Untere Giesswiesen 17, 78247 Hilzingen, Germany
- Website: www.patona.de
- Email: info@patona.de

Image 8.1: The reverse side of the PATONA Platinum battery, showing manufacturer contact information and compliance markings.