Product Overview
The BWC2-H BW Clip Single Gas H2S Monitor is a two-year maintenance gas detector designed to enhance worker safety in hazardous environments. This single gas monitor accurately logs the 35 most recent gas detection events, facilitating easy and maintenance-free record tracking. It is portable and compatible with the MicroDock III and InteliDoX instrument management systems.
Key Features:
- Hibernation mode with case accessory or IntelliDoX to conserve battery life.
- Automatic logging of the 35 most recent gas events and bump test results.
- Configuration of high and low alarm set points before device activation.
- Compatibility with IntelliDoX, MicroDock II, and Fleet Manager II software.
- Single gas, compact, lightweight design with one-button operation.
Image: The Honeywell BW Clip BWC2-H Single Gas H2S Monitor, a compact yellow device with a clear digital display and a central button.
Setup and Initial Use
The Honeywell BW Clip BWC2-H is designed for immediate use right out of the box. No complex assembly is required.
Activating the Device:
- Remove the device from its packaging.
- The device is typically activated upon first power-on. Refer to the device's display for initial prompts.
- Ensure the battery level is sufficient for operation. The device features a hibernation mode to conserve battery life when not in active use.
Setting Alarm Points:
High and low alarm set points can be configured before the device is activated. Consult the detailed manual for specific instructions on adjusting these settings to meet safety requirements.
Video: An overview of the Honeywell BW Clip BWC2-H H2S Monitor, demonstrating its compact size, one-button operation, and key features like hibernation mode and battery level check. This video highlights the device's readiness for use and its durable design.
Operating Instructions
The BW Clip BWC2-H features a simple one-button operation for ease of use.
Daily Operation:
- Power On/Off: Press and hold the single button to power the device on or off.
- Check Battery Level: A quick press of the button typically displays the current battery level and other settings.
- Monitoring: Once powered on, the device continuously monitors for H2S gas. The display will show current gas concentrations.
- Alarms: In the event of gas detection exceeding set thresholds, the device will activate audible, visual, and vibratory alarms. Respond according to your safety protocols.
Event Logging:
The monitor automatically logs the 35 most recent gas events and bump test results. This data can be accessed and managed using compatible instrument management systems like IntelliDoX, MicroDock II, and Fleet Manager II software.
Maintenance
The BW Clip BWC2-H is designed for low maintenance, offering a two-year maintenance-free operation period.
Regular Checks:
- Visual Inspection: Periodically inspect the device for any physical damage, blockages to the sensor opening, or signs of wear.
- Bump Testing: Regular bump tests are crucial to ensure the sensor and alarms are functioning correctly. Follow your company's safety procedures for bump test frequency.
- Calibration: While designed for two-year maintenance-free operation, periodic calibration may be required based on local regulations or company policy.
Cleaning:
Clean the exterior of the device with a soft, damp cloth. Do not use abrasive cleaners or solvents.
Troubleshooting
This section provides guidance for common issues. For more complex problems, contact customer support.
- Device Not Turning On:
- Ensure the button is pressed and held for the required duration.
- Check the battery level. Although designed for long life, extreme conditions or prolonged storage might affect it.
- Alarm Not Activating During Test:
- Perform a bump test with a known concentration of H2S gas.
- Verify alarm settings are correctly configured.
- If issues persist, the sensor may require service or replacement.
- Inaccurate Readings:
- Ensure the sensor opening is clear of debris.
- Perform a fresh air calibration if available, or a full calibration using calibration gas.
- Environmental factors (extreme temperature, humidity) can temporarily affect readings.
Specifications
| Feature | Detail |
|---|---|
| Brand | BW Technologies |
| Model Number | BWC2H-AMZN |
| Item Weight | 3.2 ounces |
| Color | Yellow |
| Power Source | Battery Powered |
| Alarm Type | Audible |
| Operating Humidity | 95 percent |
| Package Dimensions | 4.84 x 3.15 x 2.32 inches |
| Manufacturer | Honeywell |
| First Available Date | December 1, 2017 |
What's in the Box
- BWC2H Gas Detector
Warranty and Support
For warranty information and technical support, please refer to the official Honeywell BW Technologies website or contact their customer service. Keep your purchase receipt for warranty claims.
Return Policy: This product typically has a 30-day refund/replacement return policy from the date of purchase.