SVS PC4000PG

SVS PC-4000 13.5" Cylinder Subwoofer User Manual

Model: PC4000PG

Introduction

This manual provides essential information for the safe and optimal operation of your SVS PC-4000 13.5" Cylinder Subwoofer. Please read this manual thoroughly before installation and use, and retain it for future reference.

Safety Information

Observe the following safety precautions to prevent damage to the unit and ensure personal safety:

  • Do not expose the subwoofer to water or excessive moisture.
  • Ensure proper ventilation around the unit to prevent overheating.
  • Do not place the subwoofer near heat sources such as radiators or stoves.
  • Use only the power cord supplied with the unit.
  • Disconnect the power cord from the wall outlet if the unit will be unused for a long period.
  • Refer all servicing to qualified service personnel.

Package Contents

Verify that all items are present in the package:

  • SVS PC-4000 13.5" Cylinder Subwoofer
  • Power Cord
  • Remote Control
  • User Manual (this document)

Setup

Unpacking and Placement

Carefully remove the subwoofer from its packaging. Due to its size and weight (approximately 92.2 pounds), it is recommended to have assistance during unpacking and placement. Place the subwoofer on a stable, level surface. Consider room acoustics and listening position for optimal performance.

SVS PC-4000 Cylinder Subwoofer, front view

Figure 1: Front view of the SVS PC-4000 Cylinder Subwoofer, showcasing its tall, cylindrical design and the control panel at the base.

Connections

The PC-4000 subwoofer features various input and output options for integration into your audio system. Ensure all components are powered off before making connections.

  1. Power Connection: Connect the supplied power cord to the subwoofer's power inlet and then to a grounded AC outlet.
  2. Audio Input (RCA): Connect the RCA output from your AV receiver or pre-amplifier to the LFE (Low-Frequency Effects) input on the subwoofer. For stereo setups, use both left and right RCA inputs.
  3. Control Connection (Optional): The subwoofer supports app control via Bluetooth. Ensure Bluetooth is enabled on your smartphone or tablet for initial setup and advanced control.
SVS PC-4000 Subwoofer rear panel connections

Figure 2: Rear panel of the SVS PC-4000 Subwoofer, showing the various input and output terminals for audio and power connections.

Operating Instructions

Powering On/Off

Once connected, turn on the subwoofer using the power switch located on the rear panel. The front display will illuminate. The subwoofer also features an auto-standby mode, which will activate after a period of inactivity.

Front Panel Display and Controls

The front panel display provides visual feedback on settings and status. Buttons adjacent to the display allow for basic adjustments.

SVS PC-4000 Subwoofer front display showing PC-4000 model name

Figure 3: Close-up of the SVS PC-4000 Subwoofer's front display, showing the model name and control buttons.

SVS App Control

For comprehensive control and advanced features, download the SVS app for iOS or Android devices. The app allows you to:

  • Adjust volume levels.
  • Configure three digital parametric EQs for precise room correction.
  • Set crossover frequency.
  • Adjust phase and polarity.
  • Access custom presets for different listening modes.

Ensure your device's Bluetooth is on and within range of the subwoofer to establish a connection with the SVS app.

Maintenance

To maintain the performance and appearance of your SVS PC-4000 subwoofer:

  • Cleaning: Use a soft, dry cloth to wipe down the exterior. Avoid abrasive cleaners or solvents.
  • Ventilation: Ensure the vents are clear of dust and obstructions to prevent overheating.
  • Placement: Avoid placing the subwoofer in direct sunlight or areas with extreme temperature fluctuations.

Troubleshooting

ProblemPossible CauseSolution
No SoundPower not connected; Input cables loose; Subwoofer in standby mode; Volume too low.Check power cord and outlet; Secure all audio cables; Press power button or send audio signal to wake from standby; Increase volume via app or remote.
Distorted SoundVolume too high; Improper EQ settings; Damaged speaker driver.Reduce volume; Reset EQ settings in the SVS app; Contact SVS support if distortion persists at moderate volumes.
Bluetooth Connection IssuesBluetooth off on device; Subwoofer not in pairing mode; Interference.Ensure Bluetooth is enabled on your device; Restart the SVS app; Move closer to the subwoofer; Try pairing again.

Specifications

  • Model: PC4000PG
  • Speaker Type: Subwoofer
  • Subwoofer Diameter: 13.5 Inches
  • Speaker Maximum Output Power: 1200 Watts
  • Connectivity Technology: RCA, Bluetooth
  • Controller Type: App Control, Remote
  • Product Dimensions: 16.6"D x 16.6"W x 47"H
  • Item Weight: 92.2 pounds (41.9 Kilograms)
  • Color: Piano Gloss Black
  • Special Feature: Three digital parametric EQs, Android and iOS app control
  • UPC: 856677007459

Warranty and Support

The SVS PC-4000 Subwoofer comes with a 5-Year Unconditional Warranty. For warranty claims, technical support, or service inquiries, please contact SVS customer support directly. Retain your proof of purchase for warranty validation.

SVS Customer Support: Visit SVS Website

© 2024 SVS. All rights reserved.

Related Documents - PC4000PG

Preview SVS SB-4000 Subwoofer Owner's Manual
Comprehensive owner's manual for the SVS SB-4000 Subwoofer. Includes setup instructions, connection guides, room placement tips, and advanced DSP control settings for optimal audio performance.
Preview SVS PB-3000 R|Evolution Subwoofer Owner's Manual
Comprehensive owner's manual for the SVS PB-3000 R|Evolution subwoofer, covering setup, connection, room placement, advanced DSP controls, and troubleshooting.
Preview SVS SoundPath Subwoofer Isolation System Owner's Manual
Comprehensive owner's manual for the SVS SoundPath Subwoofer Isolation System, detailing package contents, installation procedures for various subwoofer types, technical specifications, and contact information.
Preview SVS 3000 In-Wall Subwoofer System Installation Guide - Setup and Mounting Instructions
Comprehensive installation guide for the SVS 3000 In-Wall Subwoofer System. Learn how to unbox, install the amplifier, and mount the subwoofer for optimal home theater performance.
Preview SVS 3000 In-Wall Subwoofer System Installation Guide
A comprehensive installation guide for the SVS 3000 In-Wall Subwoofer System, covering unboxing, subwoofer and amplifier installation, and system setup.
Preview SVS SB-5000 R|Evolution Subwoofer Quick Start Guide
A concise quick start guide for the SVS SB-5000 R|Evolution subwoofer, detailing setup, calibration, connection, and control options for optimal audio performance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.