1. Introduction
This manual provides essential instructions for the assembly, operation, and maintenance of your RockJam Portable DJ Laptop Stand (Model RJLP1). Designed for digital DJs, music producers, and home office users, this stand offers a stable and adjustable platform for laptops, controllers, and CD players. Please read these instructions thoroughly before use to ensure proper setup and safe operation.
2. Package Contents
Verify that all components listed below are present in your package:
- Main Stand Frame (2 pieces)
- Support Poles (2 pieces)
- Laptop Holding Arms (2 pieces)
- Leg Base Plates (2 pieces)
- Mounting Clamps (2 pieces)
- Screw Knobs (4 pieces)
- Screws (4 pieces)
- Washers (4 pieces)
- Surface Protectors (4 pieces)
- Support Pole Extensions (4 pieces)
Figure 2.1: All components included in the RockJam Portable DJ Laptop Stand package.
3. Product Features
- Durable Construction: Made from steel, ensuring longevity and stability.
- Adjustable Height: Features seven different height settings for optimal positioning.
- Anti-Slip Design: Includes surface protectors and a design that prevents devices from sliding.
- Ventilated Design: Open structure promotes airflow to prevent device overheating.
- Versatile Use: Can be used freestanding or securely mounted to a desk with included clamps.
- High Load Capacity: Capable of holding devices up to 8 lbs (approximately 3.6 kg).
4. Setup Instructions
Follow these steps to assemble your laptop stand:
4.1 Basic Assembly
- Attach the two Support Poles between the two Main Stand Frame pieces using the provided Screw Knobs. Ensure they are securely tightened.
- Secure the Laptop Holding Arms to the upper section of the Main Stand Frame using the remaining Screw Knobs. These arms should face upwards to cradle your device.
- Attach the Leg Base Plates to the bottom of the Main Stand Frame using the provided Screws and Washers.
- Apply the Surface Protectors to the contact points where your device will rest and where the stand touches the surface (if using freestanding mode).
Figure 4.1: Fully assembled RockJam Portable DJ Laptop Stand in freestanding configuration.
Figure 4.2: Detail of the screw knobs for height adjustment and securing the stand's components.
4.2 Adjusting Height
The stand offers multiple height settings. Loosen the Screw Knobs on the vertical supports, adjust the Laptop Holding Arms to your desired height, and then re-tighten the knobs firmly to secure the position.
Figure 4.3: The stand's adjustable height and width ranges for customized setup.
4.3 Mounted Setup (Optional)
For enhanced stability, the stand can be mounted to a desk or table using the included Mounting Clamps:
- Remove the Leg Base Plates from the bottom of the Main Stand Frame.
- Attach the Mounting Clamps to the bottom of the Main Stand Frame using the same Screws and Washers.
- Position the stand on your desired surface and tighten the clamps securely to prevent movement.
Figure 4.4: The laptop stand securely mounted to a desk using the provided clamps.
5. Operating Instructions
Once assembled and positioned, place your laptop, DJ controller, or CD player onto the Laptop Holding Arms. The anti-slip design and front lips of the arms are designed to keep your device securely in place. The open design of the stand ensures proper ventilation for your electronic devices, reducing the risk of overheating during extended use.
Figure 5.1: A laptop positioned on the stand, demonstrating typical usage.
6. Maintenance
- Regularly check all screws and knobs to ensure they remain tight.
- Clean the stand with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Inspect the anti-slip pads and surface protectors for wear and tear. Replace if necessary to maintain device security.
- Store the stand in a dry environment to prevent rust or damage to the steel components.
7. Troubleshooting
- Stand feels unstable: Ensure all screw knobs and mounting clamps (if used) are fully tightened. Verify that the stand is placed on a flat, stable surface.
- Device slides on the arms: Check that the anti-slip surface protectors are correctly applied and are not worn. Ensure the device is centered and within the weight limit.
- Difficulty adjusting height: Loosen the screw knobs sufficiently before attempting to adjust the height. Do not force the adjustment.
8. Specifications
| Attribute | Value |
|---|---|
| Brand | RockJam |
| Model Number | RJLP1 |
| Product Dimensions | 11.5 x 8.5 x 2 inches (folded) |
| Item Weight | 3.3 pounds |
| Material | Steel |
| Color | Black |
| Compatible Devices | Laptops, DJ Controllers, CD Players |
| Max Load Capacity | 8 lbs (3.6 kg) |
9. Warranty and Support
RockJam products are manufactured to high-quality standards. For warranty information, technical support, or assistance with your product, please refer to the contact details provided with your purchase documentation or visit the official RockJam website. Please retain your proof of purchase for any warranty claims.
