Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Livex Lighting Georgetown 2 Light Outdoor Wall Lantern (Model 2261-61). Please read these instructions thoroughly before beginning installation and retain them for future reference.
Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. All electrical connections must be in accordance with local codes, ordinances, and the National Electric Code (NEC). If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.
- Always consult local electrical codes and regulations before installation.
- Ensure the fixture is securely mounted to a structural element.
- Do not exceed the maximum wattage specified for the bulbs.
- Handle glass components with care to prevent breakage.
- This fixture is designed for outdoor use.
Package Contents
Verify that all components are present before beginning installation.
- 1 x Livex Lighting Georgetown 2 Light Outdoor Wall Lantern Fixture (Model 2261-61)
- Mounting Hardware (typically includes mounting plate, screws, wire nuts)
- Note: Light bulbs are NOT included.
Image: The Livex Lighting Georgetown 2 Light Outdoor Wall Lantern, showcasing its charcoal finish and clear glass panels.
Setup and Installation
Professional installation is recommended for electrical fixtures. Follow these general steps for installation:
- Turn Off Power: Locate the circuit breaker or fuse box and turn off the power to the junction box where the fixture will be installed.
- Prepare Mounting Surface: Ensure the mounting surface is clean, dry, and structurally sound.
- Attach Mounting Plate: Secure the mounting plate to the junction box using the provided screws.
- Wire Connections:
- Connect the fixture's black wire to the house's black (hot) wire.
- Connect the fixture's white wire to the house's white (neutral) wire.
- Connect the fixture's ground wire to the house's ground wire (or to the mounting plate if no house ground is available).
- Secure all connections with wire nuts and electrical tape.
- Mount Fixture: Carefully align the fixture with the mounting plate and secure it using the provided screws or nuts.
- Install Bulbs: Insert two candelabra base bulbs (not included) into the sockets. Do not exceed 60 watts per bulb.
- Restore Power: Turn the power back on at the circuit breaker or fuse box.
Image: The Georgetown outdoor wall lantern installed on a brick exterior wall, demonstrating its appearance in a typical setting.
Image: A technical drawing illustrating the dimensions of the Livex Lighting Georgetown lantern, including width, extension, and height.
Operating Instructions
The Livex Lighting Georgetown Outdoor Wall Lantern is operated via a standard wall switch connected to its electrical circuit. Once installed and powered, simply toggle the wall switch to turn the light fixture on or off.
- Bulb Type: Candelabra Base
- Maximum Wattage: 60 Watts per bulb
- Voltage: 120 Volts
Maintenance
Regular maintenance ensures the longevity and optimal performance of your outdoor wall lantern.
- Cleaning: To clean the fixture, turn off the power and wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or glass.
- Bulb Replacement: Ensure power is off before replacing bulbs. Allow bulbs to cool completely before touching. Replace with candelabra base bulbs, not exceeding 60 watts each.
- Inspection: Periodically inspect the wiring and mounting for any signs of wear, damage, or loose connections.
Troubleshooting
If your fixture is not functioning correctly, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers. |
|
|
Specifications
| Brand | Livex Lighting |
| Model Name | Georgetown |
| Model Number | 2261-61 |
| UPC | 847284056886 |
| Color | Charcoal |
| Material | Brass (Fixture), Glass (Shade) |
| Style | Traditional |
| Light Fixture Form | Wall |
| Indoor/Outdoor Usage | Outdoor |
| Power Source | Corded Electric |
| Light Source Type | Candelabra Base |
| Number of Light Sources | 2 |
| Voltage | 120 Volts |
| Wattage | 60 Watts (Max per bulb) |
| Item Weight | 7 Pounds |
| Product Dimensions | 23 x 10.25 x 20.75 inches |
Warranty
This Livex Lighting product is covered by a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact Livex Lighting customer support.
Customer Support
For technical assistance, replacement parts, or any questions regarding your Livex Lighting Georgetown Outdoor Wall Lantern, please contact Livex Lighting customer support. Visit the official Livex Lighting website for contact information.
You can also visit the Livex Lighting Store on Amazon for more product information.
