Kuzco Lighting ER3003-BN

Kuzco Lighting ER3003-BN Sonic Landscape LED Step Light User Manual

Model: ER3003-BN

1. Product Overview

The Kuzco Lighting ER3003-BN Sonic Landscape LED Step Light is designed to provide efficient and aesthetic illumination for outdoor steps and pathways. This recessed fixture features a durable brushed nickel finish and utilizes energy-efficient LED technology, making it suitable for various outdoor environments. Its modern design integrates seamlessly into contemporary landscape architecture.

Kuzco Lighting ER3003-BN Sonic Landscape LED Step Light, Brushed Nickel

Figure 1: Kuzco Lighting ER3003-BN Sonic Landscape LED Step Light. This image displays the front view of the brushed nickel step light, highlighting its rectangular shape and LED light source.

2. Safety Information

  • Electrical Safety: Installation must be performed by a qualified electrician in accordance with all local electrical codes. Disconnect power at the circuit breaker before installation or servicing.
  • Outdoor Use: This fixture is rated for outdoor use. Ensure all connections are properly sealed to prevent water intrusion.
  • Voltage: Ensure the power supply voltage matches the fixture's requirement (120 Volts).
  • Handling: Handle the fixture with care to avoid damage to the LED components or glass/aluminum shade.
  • Heat: LEDs can generate heat. Do not touch the fixture immediately after prolonged operation.

3. Package Contents

Verify that all components are present before beginning installation:

  • One (1) Kuzco Lighting ER3003-BN Sonic Landscape LED Step Light
  • Mounting Hardware (screws, wire connectors)
  • Installation Guide (this document)

4. Setup and Installation

This step light is designed for recessed mounting. Professional installation is highly recommended due to the electrical work involved.

4.1 Pre-Installation

  1. Turn Off Power: Locate the circuit breaker controlling the installation area and turn off the power. Verify power is off using a voltage tester.
  2. Prepare Opening: Ensure the recessed opening in the wall or step surface is appropriately sized for the fixture's dimensions (approximately 5"L x 1.5"W x 3"H).
  3. Gather Tools: You will need a screwdriver, wire strippers, electrical tape, and potentially a drill.

4.2 Wiring Instructions

  1. Identify Wires: Identify the live (black), neutral (white), and ground (green or bare copper) wires from your power supply.
  2. Connect Wires: Using the provided wire connectors, connect the fixture's wires to the corresponding power supply wires:
    • Black (Fixture) to Black (Supply)
    • White (Fixture) to White (Supply)
    • Green/Ground (Fixture) to Green/Ground (Supply)
    Ensure all connections are secure and insulated with electrical tape if necessary.

4.3 Mounting the Fixture

  1. Position Fixture: Carefully push the wired fixture into the recessed opening.
  2. Secure Fixture: Use the provided mounting screws to secure the fixture firmly into the wall or step surface. Ensure it is flush and stable.
  3. Seal (Optional): For added weather protection, apply a bead of outdoor-rated sealant around the edges of the fixture where it meets the mounting surface.

4.4 Post-Installation

  1. Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.
  2. Test Functionality: Turn on the light switch connected to the fixture to ensure it operates correctly.

5. Operating Instructions

The Kuzco Lighting ER3003-BN Sonic Landscape LED Step Light operates by a standard electrical switch connected to its power supply. There are no integrated controls on the fixture itself.

  • Turning On/Off: Use the wall switch or external timer/sensor connected to the fixture's power supply to turn the light on or off.
  • Control Methods: While the product specifications mention 'App' and 'Remote Control', these typically refer to compatibility with external smart home systems or remote-controlled switches that would be installed separately and control the power supply to the fixture. The fixture itself does not have built-in app or remote control capabilities.

6. Maintenance

Minimal maintenance is required for your LED step light.

  • Cleaning: Periodically clean the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or LED components. Ensure power is off before cleaning.
  • Inspection: Annually inspect the fixture and wiring connections for any signs of wear, damage, or corrosion. Address any issues promptly to ensure safe operation.
  • LEDs: The integrated LED light source is designed for long life and is not user-replaceable.

7. Troubleshooting

If your step light is not functioning as expected, refer to the following common issues and solutions:

ProblemPossible CauseSolution
Light does not turn on.No power to the fixture.
Loose wiring connection.
Faulty switch or circuit breaker.
Check circuit breaker and wall switch.
Verify all wire connections are secure (power off first).
Consult a qualified electrician.
Light flickers or is dim.Loose wiring connection.
Incompatible dimmer switch (if applicable).
Voltage fluctuations.
Check all wire connections (power off first).
Ensure any dimmer switch used is LED-compatible.
Consult an electrician to check power supply.
Water inside fixture.Improper sealing during installation.
Damage to fixture housing.
Turn off power immediately. Allow to dry. Re-seal edges with outdoor-rated sealant. If damage is present, replace fixture.

8. Specifications

Model NumberER3003-BN
BrandKuzco Lighting
Color/FinishBrushed Nickel
MaterialAluminum, Glass
Product Dimensions5"L x 1.5"W x 3"H
Light Source TypeLED
Wattage4 watts
Voltage120 Volts
Indoor/Outdoor UsageOutdoor
Mounting TypeRecessed
Assembly RequiredYes
Item Weight9.6 ounces (0.6 lbs)
StyleModern
Special FeatureHeavy Duty

9. Warranty Information

This Kuzco Lighting ER3003-BN Sonic Landscape LED Step Light is covered by a 5-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the official Kuzco Lighting warranty policy or contact customer support.

10. Support and Contact

For technical assistance, replacement parts, or warranty inquiries, please contact Kuzco Lighting customer support. Refer to the official Kuzco Lighting website for the most current contact information.

  • Website: www.kuzcolighting.com (Note: This is a general placeholder URL for the brand's website. Please verify the actual support URL.)
  • Phone: Refer to the website for regional contact numbers.
  • Email: Refer to the website for customer service email addresses.

© 2023 Kuzco Lighting. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.