VOLTCRAFT V-Charge 60 DC Multifunction Charger

1. Introduction

The VOLTCRAFT V-Charge 60 DC is a versatile multifunction charger designed for various battery types, including LiPo, LiIon, LiFePO, LiHV, NiCd, NiMH, and Lead-acid batteries. It offers efficient charging and discharging capabilities with an intuitive interface, making it suitable for hobbyists and professionals alike. This manual provides essential information for the safe and effective operation of your charger.

1.1 Safety Information

• Always read the entire manual before operating the charger.
• Use the charger only with compatible battery types and within specified voltage/current limits.
• Operate the charger in a well-ventilated area, away from flammable materials.
• Never leave charging batteries unattended.
• Keep the device away from moisture, dust, and extreme temperatures.
• Do not attempt to disassemble or modify the charger. Refer all servicing to qualified personnel.

2. Product Features

The VOLTCRAFT V-Charge 60 DC charger is equipped with several features to ensure efficient and safe battery management:

• Backlit Display: Provides clear visibility of charging parameters and status, even in low light conditions.
• Efficient Battery Charging: Designed for optimal power delivery and battery health.
• Intuitive Operation: User-friendly interface for easy navigation and program selection.
• Multi-Chemistry Support: Compatible with LiPo, LiIon, LiFePO, LiHV, NiCd, NiMH, and Lead-acid batteries.
• Various Charge and Discharge Programs: Offers a range of modes for different battery maintenance needs.
• Integrated Balance Function: For Lithium-based batteries, ensuring cell voltage equalization during charging.

Image: The VOLTCRAFT V-Charge 60 DC charger, highlighting its backlit display and control panel with 'BATT.', 'DEC.', 'INC.', and 'ENTER' buttons.

3. Package Contents

Please check the package contents upon unboxing. If any items are missing or damaged, contact your retailer immediately.

• VOLTCRAFT V-Charge 60 DC Multifunction Charger
• DC Input Cable (e.g., with crocodile clips for 12V power source)
• Output Charging Cable (e.g., with XT60 connector)
• Instruction Manual (this document)
• (Note: Additional cables or adapters, such as for specific battery connectors or a temperature sensor, may need to be purchased separately.)

4. Setup

Follow these steps to set up your VOLTCRAFT V-Charge 60 DC charger:

1. Power Connection: Connect the DC input cable to the charger's input port and to a suitable 12V DC power source (e.g., a car battery or a regulated DC power supply). Ensure correct polarity.
2. Battery Connection:
   • Connect the main charging cable (e.g., XT60) from the charger's output port to your battery's main power connector.
   • For Lithium-based batteries (LiPo, LiIon, LiFePO, LiHV), connect the battery's balance lead to the charger's balance port. Ensure the correct cell count (e.g., 2S, 3S, up to 6S) is matched.
3. Initial Power On: Once connected, the charger's backlit display should illuminate, indicating it is ready for operation.

5. Operating Instructions

The V-Charge 60 DC features an intuitive menu system. Use the control buttons to navigate and select programs:

• BATT. (Battery Type/Stop): Press to cycle through battery types (e.g., LiPo, NiMH) or to stop an ongoing process.
• DEC. (Decrease/Status): Press to decrease a value or to view status information during operation.
• INC. (Increase/Status): Press to increase a value or to view status information during operation.
• ENTER (Start/Confirm): Press to confirm a selection or to start a charging/discharging process.

5.1 Charging a Battery

1. Select Battery Type: Use the BATT. button to choose the correct battery chemistry (e.g., LiPo, NiMH).
2. Select Program: Navigate through the menu to select the desired program (e.g., "LiPo BALANCE", "NiMH CHARGE").
3. Set Parameters: Use the DEC. and INC. buttons to adjust charging current, voltage, or cell count according to your battery's specifications.
4. Start Charging: Press and hold the ENTER button to start the charging process. The charger will perform a pre-check before beginning.
5. Monitor Progress: The display will show real-time charging status, including current, voltage, and charged capacity.
6. Completion: The charger will automatically stop when the battery is fully charged and may emit an audible alert.

5.2 Discharging a Battery

Similar to charging, select the appropriate discharge program and set the desired discharge current and cut-off voltage. Always refer to your battery's specifications for safe discharge limits.

6. Maintenance

Proper maintenance ensures the longevity and reliable operation of your charger:

• Cleaning: Regularly wipe the charger's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ventilation: Ensure the cooling fan and vents are free from dust and obstructions. The charger's fan can be quite active during operation, which is normal for cooling.
• Storage: Store the charger in a cool, dry place when not in use, away from direct sunlight and extreme temperatures.
• Cable Inspection: Periodically check all cables and connectors for signs of wear, damage, or corrosion. Replace any damaged cables immediately.

7. Troubleshooting

If you encounter issues with your VOLTCRAFT V-Charge 60 DC, refer to the following common problems and solutions:

8. Specifications

9. Warranty and Support

VOLTCRAFT products are built to high-quality standards. For any issues or support, please refer to the following information:

• Spare Parts Availability: 1 Year
• Software Updates Guaranteed Until: Information not available
• Manufacturer: VOLTCRAFT
• For technical support or warranty claims, please contact your point of purchase or visit the official VOLTCRAFT website for contact information.