Behringer MPA200BT 200W Portable PA System User Manual

1. Introduction

Thank you for choosing the Behringer EUROPORT MPA200BT portable PA system. This all-in-one system is designed to provide powerful, high-quality audio for various applications, including live performances, presentations, and events. Featuring a 200-watt amplifier, a wireless microphone, Bluetooth audio streaming, and battery operation, the MPA200BT offers exceptional versatility and convenience.

Please read this manual thoroughly to ensure proper operation and to get the most out of your MPA200BT system.

2. Important Safety Instructions

• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus.
• Do not place naked flame sources, such as lighted candles, on the apparatus.
• The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

3. Package Contents

Upon unpacking your Behringer MPA200BT, please ensure all items listed below are present and in good condition:

• Behringer MPA200BT Portable Bluetooth Speaker
• Wireless Handheld Microphone
• Power Cable
• User Manual (this document)

Figure 3.1: The Behringer MPA200BT portable PA system shown with its included wireless handheld microphone.

4. Setup

4.1 Initial Charging

The MPA200BT features an internal battery for portable operation. Before first use, it is recommended to fully charge the unit. Connect the supplied power cable to the AC inlet on the rear panel and plug it into a suitable power outlet. The charging indicator will illuminate.

4.2 Physical Placement

Place the MPA200BT on a stable, flat surface or mount it on a speaker stand (not included) using the integrated pole mount. Ensure adequate ventilation around the unit.

4.3 Connecting the Wireless Microphone

The MPA200BT comes with a dedicated wireless microphone. To use it, ensure the microphone has fresh batteries installed. The system is designed for automatic pairing. Simply power on the MPA200BT and the microphone, and they should connect automatically. Refer to the display for wireless signal strength.

4.4 Rear Panel Connections

Figure 4.1: Detailed view of the MPA200BT rear control panel.

• INPUT 1 & INPUT 2 (XLR/TRS Combo Jacks): Connect wired microphones or line-level instruments.
• MIX OUTPUT (XLR): Send the mixed audio signal to another PA system or recording device.
• MP3 Input (RCA): Connect external audio sources like CD players or media players.
• USB Port: For charging USB devices only (5V 2A).

5. Operating Instructions

5.1 Powering On/Off

Locate the power switch on the rear panel. Press to turn the unit ON or OFF. The display will illuminate upon power-on.

5.2 Volume Control

Use the main volume knob on the rear panel to adjust the overall output level of the system. Individual input levels can be adjusted via the menu system.

5.3 Bluetooth Audio Streaming

To stream audio via Bluetooth:

1. Ensure Bluetooth is enabled on your smart device.
2. On the MPA200BT, press the Bluetooth button. The Bluetooth icon on the display will flash.
3. On your smart device, search for "BEHRINGER MPA200BT" in the Bluetooth settings and select it to pair.
4. Once paired, the Bluetooth icon on the MPA200BT display will become solid. You can now play audio from your device through the speaker.

5.4 Using the Wireless Microphone

After initial pairing (as described in Setup), simply turn on the wireless microphone. The system will automatically detect and connect to it. Adjust the microphone's volume level using the controls on the MPA200BT's rear panel or through the menu.

5.5 Remote Control via Smartphone

The MPA200BT can be controlled remotely via a dedicated smartphone application. Download the official Behringer app from your device's app store. Connect your smartphone to the MPA200BT via Bluetooth as described above. The app will allow you to control various parameters, including volume, EQ, and effects.

6. Maintenance

6.1 Cleaning

Clean the unit with a soft, dry cloth. Do not use any liquid cleaners or solvents. Ensure the unit is powered off and unplugged before cleaning.

6.2 Battery Care

To prolong battery life, avoid fully discharging the battery frequently. Recharge the unit regularly, even if not in use, especially if storing for extended periods. Store the unit in a cool, dry place.

6.3 Storage

When storing the MPA200BT, ensure it is powered off and disconnected from the power supply. Store in a clean, dry environment away from extreme temperatures and direct sunlight.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For detailed warranty information and technical support, please refer to the official Behringer website or contact their customer service. You can also find additional resources and FAQs on the product support page.

A PDF version of the user guide is available for download: Behringer MPA200BT User Guide (PDF).