Coaster Home Furnishings Beckham 46" Round Dining Table Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Coaster Home Furnishings Beckham 46" Round Dining Table. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Safety Information

WARNING: [PROPOSITION 65 WARNING] This product can expose you to chemicals including [name of one or more chemicals], which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

• Always assemble the table on a soft, clean surface to prevent scratches.
• Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not exceed the maximum weight recommendation of 300 pounds.
• Keep small parts away from children during assembly.
• Exercise caution when handling the tempered glass top to prevent breakage or injury.

Parts List

Please verify that all components are present before beginning assembly. While a detailed parts list is not provided here, typical components include:

• Tempered Glass Tabletop
• Metal Asterisk-style Base Components
• Assembly Hardware (screws, washers, Allen wrench)
• Adjustable Levelers/Feet

Refer to the packaging for a complete and visual parts identification guide.

Assembly Instructions

Recommended Number of People for Assembly: 2

Tools Recommended For Assembly: Screw Driver (All necessary assembly tools are included).

1. Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, non-abrasive surface to prevent damage.
2. Assemble Base Structure: Begin by connecting the metal asterisk-style base components. Pay close attention to the orientation of each piece to ensure proper alignment. The base is designed to interlock.
3. Secure Base Connections: Use the provided screws and Allen wrench to secure the base components. Do not fully tighten screws until all base pieces are loosely connected and aligned. This allows for minor adjustments.
4. Attach Levelers/Feet: Screw the adjustable levelers into the bottom of the base legs. These will help stabilize the table on uneven surfaces.
5. Position Glass Top: With the help of a second person, carefully lift the tempered glass tabletop and align it with the pre-attached suction cups or rubber stoppers on the top of the metal base. Gently lower the glass onto the base, ensuring it is centered and stable.
6. Final Tightening: Once the glass top is securely in place and the table is stable, go back and fully tighten all screws on the metal base.

Image 1: Product Dimensions Diagram. This diagram illustrates the overall dimensions of the table, including its 46-inch diameter and 29.5-inch height, along with the structural measurements of the asterisk base.

Image 2: Asterisk Base Top View. A top-down perspective of the chrome metal asterisk base, showing the intricate design and connection points for the glass tabletop.

Operating Instructions

• Use the table for dining and other appropriate household activities.
• Avoid placing excessively hot items directly on the glass surface without protective mats.
• Do not stand or sit on the table.
• Distribute weight evenly across the tabletop.

Maintenance

• Cleaning: Clean the glass top and chrome base using a damp cloth.
• Avoid Harsh Chemicals: Do not use strong chemicals, abrasive cleaners, or rough sponges, as these can damage the finish of the chrome and scratch the glass.
• Regular Inspection: Periodically inspect all connections and hardware to ensure they remain tight and secure.

Troubleshooting

• Table Wobbles: Check if the floor is even. Adjust the levelers on the bottom of the table legs until the table is stable. Ensure all base connections are fully tightened.
• Difficulty Assembling Base: Ensure that the base components are correctly oriented according to the visual instructions. Loosen all screws slightly, adjust the alignment, and then re-tighten. It is crucial for two people to assist with assembly to manage the components effectively.
• Glass Top Not Secure: Verify that the glass is properly seated on all suction cups or rubber stoppers on the base. Ensure the base itself is stable and level.

Specifications

Warranty and Support

This product comes with a 1 year limited manufacturer warranty. For warranty claims or further assistance, please contact Coaster Fine Furniture customer support. Keep your purchase receipt for warranty validation.

Product Overview

Image 3: Beckham Dining Table. A full view of the assembled 46-inch round dining table, showcasing its clear tempered glass top and the distinctive chrome asterisk-shaped metal base.

Image 4: Table in Dining Setting. The Beckham dining table placed in a contemporary dining area, complete with chairs, a vase of flowers, and a fruit bowl, demonstrating its aesthetic appeal and functionality.

About Coaster Fine Furniture