1. Product Overview
The Signia FUN SP is a Behind-The-Ear (BTE) hearing aid designed to provide amplification for individuals with hearing loss. It combines high power with user comfort, aiming to enhance hearing clarity throughout the day. This device features a rocker switch for easy volume adjustments and allows selection from four distinct sound profiles.

Image 1.1: The Signia FUN SP Behind The Ear Hearing Aid, showcasing its compact design.

Image 1.2: A hand holding the Signia FUN SP hearing aid, illustrating its small size.
2. Product Components
The Signia FUN SP hearing aid consists of several key components:
- Main Unit: Houses the electronics, microphone, and battery compartment.
- Ear Hook: Connects the main unit to the ear mold/dome.
- Rocker Switch: Used for volume control and program changes.
- Battery Compartment: For inserting and replacing the hearing aid battery.
- Ear Mold/Dome: Sits inside the ear canal to deliver sound.

Image 2.1: The Signia FUN SP hearing aid alongside its charging case, illustrating the complete product set.
3. Setup
3.1 Battery Installation
- Gently open the battery compartment door located on the hearing aid.
- Insert the correct size battery (12V, included) with the positive (+) side facing the correct orientation as indicated inside the compartment.
- Close the battery compartment door firmly until it clicks into place.

Image 3.1: A close-up view of a hand inserting a battery into the Signia FUN SP hearing aid's battery compartment.
3.2 First Use
Before first use, ensure the battery is correctly installed. Your hearing aid may require professional programming by a hearing care specialist to match your specific hearing needs. It is recommended to consult with a professional for initial fitting and adjustments.
4. Operating Instructions
4.1 Power On/Off
- To Turn On: Close the battery compartment door completely. The hearing aid will typically power on automatically after a short delay.
- To Turn Off: Open the battery compartment door fully. This conserves battery life when the device is not in use.
4.2 Volume Adjustment
The rocker switch on the hearing aid allows for easy volume control:
- Press the upper part of the rocker switch to increase the volume.
- Press the lower part of the rocker switch to decrease the volume.
4.3 Sound Profiles
The Signia FUN SP offers 4 sound profiles. These can be adjusted at the touch of a button. A short press on the rocker switch (or a specific sequence, refer to your hearing care professional's guidance) will cycle through the available sound profiles, allowing you to select the optimum setting for your environment.

Image 4.1: A person wearing the Signia FUN SP hearing aid, highlighting its comfortable fit behind the ear.

Image 4.2: A person wearing the Signia FUN SP hearing aid in a work setting, demonstrating its discreet integration into daily life.
5. Maintenance and Care
Proper maintenance ensures the longevity and optimal performance of your hearing aid.
- Daily Cleaning: Use a soft, dry cloth to wipe the hearing aid daily. Avoid using water or cleaning solutions directly on the device.
- Ear Mold/Dome Care: Regularly check the ear mold or dome for wax buildup. Clean with a specialized cleaning tool or a soft brush. If removable, it can be washed with mild soap and water, then thoroughly dried before reattaching.
- Storage: When not in use, store the hearing aid in its case, preferably with the battery compartment open to allow air circulation and prevent moisture buildup.
- Avoid Moisture and Heat: Protect your hearing aid from water, high humidity, and extreme temperatures. Remove it before showering, swimming, or using hairspray.

Image 5.1: A person opening the protective case for the Signia FUN SP hearing aid, demonstrating proper storage.
6. Troubleshooting
If you experience issues with your Signia FUN SP hearing aid, try the following common troubleshooting steps:
- No Sound:
- Check if the battery is correctly inserted and fully charged. Replace if necessary.
- Ensure the battery compartment is fully closed.
- Check for wax or debris blocking the ear mold/dome or sound outlet. Clean thoroughly.
- Verify the volume setting is not at its lowest.
- Weak or Distorted Sound:
- Replace the battery.
- Clean the ear mold/dome and sound outlet.
- Ensure the hearing aid is properly seated in your ear.
- Whistling/Feedback:
- Ensure the hearing aid is inserted snugly into your ear.
- Check for cracks or damage to the ear hook or ear mold/dome.
- Reduce the volume if it is too high.
If these steps do not resolve the issue, please contact customer support or a hearing care professional for further assistance.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Signia |
| Model Name | FUN SP |
| Part Number | FCS-6C-FP |
| Manufacturer | Siemens, Signia GmbH |
| Item Weight | 5 kg (packaging weight) |
| Package Dimensions | 16 x 10.92 x 4.57 cm |
| Batteries | 1 x 12V battery (included) |
| Control Type | Rocker Switch |
| Sound Profiles | 4 adjustable profiles |
8. Warranty and Support
8.1 Warranty Information
The Signia FUN SP hearing aid comes with a 2-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty card included with your product or contact customer support.
8.2 Important Note on Prescription
Hearing aids are medical products that are typically prescribed by hearing care professionals. It is assumed that you have a prescription to purchase and use this product. For optimal results and safety, professional fitting and programming are highly recommended.
8.3 Contact Support
For any queries regarding hearing aid programming, accessories, battery usage, or other details, please contact us:

Image 8.1: Contact details for support, including phone number and email address.
Phone: 9910887323
Email: store@hear.com

Image 8.2: Information regarding free programming support via email or WhatsApp.





