1. Safety Information
Please read all instructions carefully before installation and use. Failure to follow these instructions may result in property damage, personal injury, or voiding of the warranty.
- Professional Installation: Installation should be performed by a qualified and licensed plumber.
- Inspection: Inspect the bathtub and faucet for any damage prior to installation. Do not install if damage is found.
- Heavy Item: The bathtub is heavy. Always use appropriate lifting techniques and assistance to prevent injury. Two or more people are required for safe handling.
- Water Temperature: Ensure the water heater is set to a safe temperature to prevent scalding.
- Floor Support: Verify that the floor structure can adequately support the weight of the filled bathtub and its occupant(s).
2. Package Contents
Verify that all components are present and undamaged before beginning installation.
- WOODBRIDGE B-0014 Freestanding Bathtub
- WOODBRIDGE F0001 Freestanding Faucet (Brushed Nickel)
- Brushed Nickel Overflow Assembly
- Brushed Nickel Push Pop-up Drain Assembly
- Flexible Drain Hose
- User & Instruction Manual
3. Specifications
| Feature | Detail |
|---|---|
| Exterior Dimensions (Bathtub) | 59" L x 29.5" W x 23.25" H |
| Max Water Depth (to overflow) | 14 1/2" |
| Effective Tub Capacity | 55 Gallons (approx. 208 Liters) |
| Material | 100% High Gloss White LUCITE Acrylic, reinforced with ASHLAND resin & fiberglass |
| Faucet Finish | Brushed Nickel |
| Drain Location | Center |
| Installation Type | Freestanding |
| Item Weight | 115 Pounds (approx. 52 kg) |
| Certifications | CSA B45.5-17/IAPMO Z124-2017, Massachusetts Plumbing & Gas Code approved |
Figure 3.1: Bathtub Dimensions (Model B-0014/BTA1514)
Figure 3.2: Faucet Dimensions (Model F0001)
4. Installation Instructions
4.1 Pre-Installation Checks
- Ensure the installation area is clean, level, and structurally sound to support the bathtub's weight when filled.
- Confirm that all necessary plumbing rough-ins (drain and water supply lines) are correctly positioned according to the bathtub and faucet dimensions.
- Unpack all components and verify against the package contents list.
4.2 Bathtub Installation
- Positioning: Carefully place the bathtub in its desired location. Use the adjustable leveling feet on the bottom of the tub to ensure it is perfectly level.
- Drain Connection: Connect the flexible drain hose from the bathtub's integrated drain system to the floor drain. Ensure all connections are secure and watertight. The WOODBRIDGE sealed drain system is designed to prevent leaks.
- Overflow Connection: The brushed nickel overflow is integrated. Ensure it is properly aligned and sealed.
- Water Test: Fill the tub with water and check for any leaks around the drain and overflow connections. Address any leaks immediately before proceeding.
Figure 4.1: Woodbridge Sealed Drain System
4.3 Faucet Installation (Model F0001)
- Mounting: Secure the freestanding faucet base to the floor using the provided mounting hardware. Ensure it is stable and plumb.
- Water Supply Connection: Connect the hot and cold water supply lines to the corresponding inlets on the faucet. Use appropriate sealants and ensure connections are tight to prevent leaks.
- Handheld Shower: Connect the handheld shower hose to the faucet body.
- Water Test: Turn on the water supply and check for leaks at all faucet connections. Operate the main spout and handheld shower to ensure proper function.
Figure 4.2: Faucet in Operation
5. Operating Instructions
- Filling the Bathtub: Use the faucet handle to control water flow and temperature. Always test the water temperature with your hand before entering the tub to prevent scalding.
- Drainage: To drain the tub, press the center of the push pop-up drain. Press again to close it.
- Non-Slip Surface: The bathtub features a non-slip bottom texture for added safety.
Figure 5.1: Non-Slip Bathtub Bottom
Figure 5.2: Brushed Nickel Overflow and Drain
6. Maintenance and Cleaning
6.1 Bathtub Cleaning
- Clean the acrylic surface with a soft cloth and a non-abrasive cleaner.
- Avoid using harsh chemicals, abrasive pads, or solvents as these can damage the high-gloss finish.
- For stubborn stains, a mild solution of dish soap and warm water can be used. Rinse thoroughly after cleaning.
- The EnduraClean surface is stain-resistant and scratch-resistant, designed for easy maintenance.
6.2 Faucet Cleaning
- Wipe the brushed nickel faucet with a soft, damp cloth.
- Do not use abrasive cleaners, polishes, or waxes on the faucet finish, as this may cause discoloration or damage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water leaks from drain/overflow. | Loose connections or improper sealing. | Check and tighten all drain and overflow connections. Ensure proper use of plumber's putty or sealant. If issues persist, consult a professional plumber. |
| Slow drainage. | Clog in the drain assembly or plumbing. | Remove the pop-up drain and clear any debris. If the clog is further down, professional plumbing assistance may be required. |
| Faucet drips or leaks. | Worn cartridge or loose connections. | Ensure water supply connections are tight. If dripping continues, the internal cartridge may need replacement. Contact WOODBRIDGE customer support. |
| Bathtub is not level. | Adjustable feet not properly set. | Adjust the leveling feet on the bottom of the bathtub until it is stable and level. |
8. Warranty and Support
WOODBRIDGE warrants this product to be free of defects in material and workmanship for a period of 1 year from the date of purchase. This limited warranty applies to the original purchaser only.
For warranty claims, technical assistance, or to order replacement parts, please contact WOODBRIDGE customer support. Have your model number and proof of purchase ready.
Note: Improper installation, misuse, or use of abrasive cleaners will void the warranty.
