1. Introduction
Thank you for choosing the Lindby Eddie Traditional Outdoor Post Light. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
Figure 1: Lindby Eddie Traditional Outdoor Post Light. This image shows the complete assembled post light with three lamps, featuring a rustic brown finish and clear glass globes.
2. Safety Information
WARNING: To avoid electric shock, always disconnect power at the fuse box or circuit breaker before installation, servicing, or changing bulbs. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Ensure the electrical supply is suitable for the fixture (230V).
- This fixture is rated IP44, providing protection against solid objects over 1mm and splashing water from any direction. It is suitable for outdoor use.
- Do not exceed the maximum wattage specified for the bulbs (3 x 60W E27).
- Handle glass components with care to prevent breakage.
- Keep packaging materials out of reach of children.
- If you are unsure about any part of the installation, consult a qualified electrician.
3. Package Contents
Verify that all components are present and undamaged before beginning installation.
Figure 2: All components included in the package. This image displays the base, multiple pole sections, the three-lamp head assembly with wiring, three glass globes, three bulb holders, and mounting hardware.
- Post Light Base
- Multiple Pole Sections (for adjustable height)
- Three-Lamp Head Assembly with Wiring
- Three Glass Globes
- Mounting Hardware (screws, anchors, terminal block)
- Bulbs are not included.
4. Setup and Installation
Follow these steps for proper installation. It is recommended to have two people for assembly and installation due to the height and weight of the fixture.
- Prepare the Installation Site:
- Ensure the mounting surface is stable and level, capable of supporting the weight of the post light.
- Turn off the main power supply at the circuit breaker before starting any electrical work.
- Ensure the electrical cable is properly routed and protected for outdoor use.
- Assemble the Post:
- Connect the pole sections together, ensuring they are securely fastened. The design allows for modular assembly to achieve the desired height.
- Carefully thread the electrical wires through the pole sections as you assemble them.
- Mount the Base:
Figure 3: Detail of the base, showing the pre-drilled holes for secure mounting to a surface.
- Position the base of the post light on the desired mounting surface.
- Mark the locations for drilling holes through the base's mounting points.
- Drill appropriate holes and insert anchors if necessary, depending on the surface material.
- Secure the base firmly to the surface using the provided mounting screws.
- Connect Electrical Wiring:
Figure 4: Internal wiring connections within the base, showing the terminal block for connecting the main power supply.
- Carefully connect the main electrical supply wires to the terminal block inside the base.
- Connect the live (L), neutral (N), and earth (ground) wires according to local electrical codes. Ensure all connections are tight and secure.
- Ensure the wiring from the lamp head assembly is also securely connected to the terminal block.
- Attach the Lamp Head Assembly:
Figure 5: Detailed view of the three-lamp head assembly, showing the bulb sockets and structural elements.
- Attach the three-lamp head assembly to the top of the assembled pole. Ensure it is securely fastened.
- Install three E27 bulbs (not included) into the sockets. Do not exceed 60W per bulb.
- Install Glass Globes:
Figure 6: The three lamps with their clear glass globes securely in place, ready for illumination.
- Carefully place each glass globe over its respective bulb and secure it according to the fixture's design (e.g., by twisting or using retaining clips).
- Final Check:
- Double-check all connections and ensure all components are securely assembled.
- Restore power at the circuit breaker and test the light.
Figure 7: The Lindby Eddie post light fully installed and illuminated in an outdoor garden path setting.
5. Operating Instructions
The Lindby Eddie Outdoor Post Light operates by a standard electrical switch connected to its power supply. Once installed and wired correctly, simply turn on the connected switch to illuminate the fixture.
- Bulb Type: Uses 3 x E27 bulbs.
- Maximum Wattage: Do not exceed 60W per bulb.
- Dimmable: This fixture is dimmable, provided you use dimmable E27 bulbs and connect it to a compatible dimmer switch (not included).
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your post light.
- Cleaning:
- Before cleaning, ensure the power is turned off at the circuit breaker.
- Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Clean glass globes gently to maintain clarity.
- Bulb Replacement:
- Turn off power to the fixture at the circuit breaker.
- Allow bulbs to cool completely before touching them.
- Carefully remove the glass globe.
- Unscrew the old E27 bulb and screw in a new one, ensuring it does not exceed 60W.
- Reattach the glass globe securely.
- Restore power and test.
- Inspection: Periodically inspect the wiring and connections for any signs of wear or damage. Ensure all mounting screws remain tight.
7. Troubleshooting
If you encounter issues with your Lindby Eddie Post Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers. |
|
|
| Water inside glass globes. |
|
|
If the problem persists after attempting these solutions, please contact Lindby customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Lindby |
| Model Number | 9630004 |
| Dimensions (L x W x H) | 59.5 x 59.5 x 198 cm |
| Weight | 6.72 kg |
| Material | Aluminum, Metal, Glass |
| Color | Brown (Oxidized finish) |
| Style | Rustic / Country House |
| Number of Bulbs | 3 |
| Bulb Socket Type | E27 |
| Max Wattage per Bulb | 60W |
| Operating Voltage | 230 Volts (AC) |
| Protection Rating | IP44 |
| Dimmable | Yes (with dimmable bulbs and compatible dimmer switch) |
| Light Direction | Incandescent |
| Components Included | Fixture (bulbs not included) |
9. Warranty and Support
For warranty information and customer support, please refer to the documentation provided with your purchase or contact Lindby directly through their official website or your retailer. Keep your proof of purchase for any warranty claims.
For additional information or assistance, you may visit the Lindby brand store: Lindby Brand Store
