1. Important Safety Information
Please read these instructions carefully before installation and use. Retain this manual for future reference.
- Electrical Installation: Installation must be performed by a qualified electrician or competent person in accordance with all local and national electrical codes.
- Power Disconnection: Always disconnect the main power supply at the circuit breaker before attempting any installation, maintenance, or bulb replacement.
- Voltage: Ensure the supply voltage matches the lamp's specified voltage (230V).
- Bulb Type: Use only G9 LED bulbs as specified. Do not exceed the maximum wattage of 20W per socket.
- Indoor Use Only: This fixture is rated IP20 and is suitable for indoor dry locations only. Do not expose to moisture or direct water.
- Material Handling: The fixture is made of plaster. Handle with care to prevent damage.
2. Package Contents
Verify that all components are present and undamaged before beginning installation.
- Lindby LEANDER Wall Light fixture (plaster, white)
- Mounting bracket
- Screws and wall plugs for mounting
- G9 lamp holders (pre-installed)
- 2 x G9 LED bulbs
- Gloves for handling
- Sandpaper for surface treatment
3. Product Overview
The Lindby LEANDER wall light features a modern, curved design crafted from plaster, providing indirect illumination. Its white plaster finish allows for customization by painting to match your interior decor.
Image: Front view of the Lindby LEANDER wall light, showcasing its curved plaster design.
Image: The LEANDER wall light installed on a wall, demonstrating its indirect lighting effect.
4. Setup and Installation
Warning: Ensure power is disconnected at the main circuit breaker before proceeding with installation.
- Prepare the Wall: Choose a suitable location on an indoor wall. Ensure the wall can support the fixture's weight (approx. 2.18 kg).
- Mounting Bracket Installation:
- Position the mounting bracket on the wall at the desired height.
- Mark the drilling points through the holes in the bracket.
- Drill holes in the wall and insert the provided wall plugs.
- Secure the mounting bracket to the wall using the provided screws.
Image: Top view of the light fixture's interior, showing the mounting plate and central wiring access point.
- Electrical Connection:
- Carefully connect the household electrical wires to the terminal block inside the fixture. Ensure correct polarity (Live, Neutral, Earth).
- Secure all connections tightly.
Image: Close-up of the G9 lamp holder and the electrical terminal block for wiring connections.
- Attach the Fixture: Align the fixture with the mounting bracket and secure it using the provided fasteners.
- Insert Bulbs: Gently insert the G9 LED bulbs into the lamp holders. Do not force them.
- Restore Power: Once installation is complete and secure, restore power at the circuit breaker.
5. Operating Instructions
The Lindby LEANDER wall light operates via a standard wall switch connected to its electrical circuit. Simply toggle the wall switch to turn the light on or off.
- Turning On/Off: Use the connected wall switch to control the light.
- Bulb Replacement: Refer to the 'Maintenance' section for instructions on safely replacing bulbs.
6. Maintenance
Regular maintenance ensures the longevity and appearance of your Lindby LEANDER wall light.
- Cleaning: Disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the plaster finish.
- Painting the Fixture: The plaster material allows the fixture to be painted. Use the included gloves and sandpaper to prepare the surface if desired. Apply paint suitable for plaster or interior walls. Ensure the paint is completely dry before restoring power.
- Bulb Replacement:
- Disconnect power at the circuit breaker.
- Allow bulbs to cool completely before handling.
- Gently pull out the old G9 bulb from its socket.
- Insert a new G9 LED bulb (max 20W) into the socket, ensuring it is fully seated.
- Restore power.
7. Troubleshooting
If you encounter issues with your wall light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply Faulty bulb Loose wiring connection | Check circuit breaker and wall switch Replace bulb Check wiring connections (ensure power is off) |
| Light flickers | Loose bulb Incompatible bulb Faulty wiring | Ensure bulb is fully seated Use recommended G9 LED bulbs Consult a qualified electrician |
| Fixture is damaged | Impact or improper handling | Contact customer support for assistance |
8. Specifications
| Brand | Lindby |
| Model | LEANDER (9613004) |
| Material | Plaster |
| Color | White (paintable) |
| Dimensions (L x W x H) | 17 cm x 36.5 cm x 7 cm |
| Weight | 2.18 kg |
| Light Source | 2 x G9 |
| Bulb Type | LED |
| Max Wattage per Socket | 20W |
| Operating Voltage | 230 Volts |
| Protection Class | I |
| IP Rating | IP20 (Indoor use only) |
| EU Energy Efficiency Label | A++ |
| Manufacturer | Lampenwelt |
9. Warranty and Support
For warranty information or technical support, please contact the retailer or manufacturer directly. If you purchased this product via Amazon, you can contact the seller, Lamp24, through your Amazon retail profile for assistance with any product-related questions.
