Craftmade LAV44BN4LK-LED
Craftmade Laval 44" Ceiling Fan User Manual
Model: LAV44BN4LK-LED
Product Overview
The Craftmade Laval 44" Ceiling Fan is a versatile lighting and air circulation solution designed for indoor spaces. It features a 3-speed reversible motor, custom reversible blades, and an integrated dimmable LED light kit, making it suitable for various room aesthetics and functional needs.

Image: Front view of the Craftmade Laval 44-inch Ceiling Fan in brushed satin nickel finish with light wood blades and an integrated frosted glass light kit.
Safety Information
Always disconnect power at the circuit breaker before installing, cleaning, or performing any maintenance on the fan. Ensure all electrical connections comply with local codes and ordinances. Consult a qualified electrician if you are unsure about wiring procedures. Do not operate the fan with damaged parts. This fan is designed for indoor use only.
Setup and Installation
This section provides general guidance for setting up your Craftmade Laval ceiling fan. Refer to the detailed installation guide included in your hardware pack for specific step-by-step instructions.
Pre-Installation Checklist
- Verify all components are present: Motor, Blades (Custom Reversible Laval 44 Blades: Brushed Nickel/Maple), Hardware Pack, Installation Guide.
- Ensure the mounting location can support the fan's weight (approximately 16.5 pounds).
- Confirm power supply is 120 Volts.
Mounting Options
The Laval fan supports a Dual Mount system, allowing for installation on either flat or angled ceilings up to 23 degrees. It is designed for Semi Flush Mount installation.
Assembly
Assembly is required. Follow the instructions in the provided installation guide for attaching blades, the light kit, and securing the fan to the ceiling electrical box.

Image: Craftmade Laval 44-inch Ceiling Fan installed in a modern dining room setting above a glass-top table with four chairs.
Operating Instructions
Your Craftmade Laval ceiling fan is equipped with user-friendly controls for optimal comfort.
Fan Speed Control
The fan features a 3-speed motor controlled by a standard pull chain. Pull the chain repeatedly to cycle through high, medium, low, and off settings. The fan provides an airflow capacity of 4279 Cubic Feet Per Minute.
Light Operation
The integrated 18 Watt LED light kit is dimmable. Use the separate pull chain for the light to turn it on/off and adjust brightness. Refer to your installation guide for specific dimming instructions if applicable.
Reversible Motor Function
A slide switch on the fan motor housing allows you to reverse the blade direction. This feature is useful for seasonal comfort: a downward airflow creates a cooling effect in summer, while an upward airflow recirculates warm air in winter.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your ceiling fan.
Cleaning
- Always turn off power at the circuit breaker before cleaning.
- Use a soft, lint-free cloth to wipe down the fan blades and motor housing.
- For the frosted glass shade, use a mild glass cleaner applied to a cloth, not directly to the fixture.
- Avoid using abrasive cleaners or solvents, as they may damage the finish.
Blade Care
The reversible blades (Brushed Nickel/Maple) can be cleaned with a dry or slightly damp cloth. Ensure blades are balanced to prevent wobbling.
LED Light Kit
The integrated LED light kit is designed for long-lasting performance and typically does not require bulb replacement. If issues arise, consult the troubleshooting section or contact customer support.
Troubleshooting
Before contacting customer support, try these common troubleshooting steps.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | No power to fan; Loose wire connections; Incorrect pull chain setting | Check circuit breaker; Ensure all wiring is secure (power off first); Pull chain to cycle through speeds. |
| Light does not work | Loose wire connections; Faulty LED driver | Check light kit wiring (power off first); Contact customer support if LED driver is suspected. |
| Fan wobbles | Loose blades or blade holders; Unbalanced blades; Loose mounting bracket | Tighten all blade screws; Use balancing kit (not included) if needed; Ensure mounting bracket is securely fastened. |
| Noisy operation | Loose screws; Motor hum; Blades hitting an obstruction | Check and tighten all screws; Some motor hum is normal; Ensure nothing is obstructing blade rotation. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Craftmade |
| Model Number | LAV44BN4LK-LED |
| Size | 44 inches |
| Color | Brushed Satin Nickel |
| Material | Aluminum, Acrylic, Plywood, Silicon, Steel, Copper |
| Style | Contemporary |
| Room Type | Living Room, Bedroom (also suitable for Office, Kitchen, Bathroom, Home, Dining Room) |
| Indoor/Outdoor Usage | Indoor only |
| Power Source | Corded Electric |
| Installation Type | Semi Flush Mount |
| Special Feature | LED Light |
| Control Method | Pull Chain Control |
| Light Source Type | LED |
| Voltage | 120 Volts |
| Light Color | White |
| Included Components | Motor, Blades, Hardware Pack, Installation Guide |
| Item Weight | 16.5 Pounds |
| Wattage (Fan Motor) | 14 watts |
| Wattage (LED Light) | 18 watts |
| Air Flow Capacity | 4279 Cubic Feet Per Minute |
| Product Dimensions | 44 x 44 x 15.34 inches |
| Country of Origin | China |
| UPC | 647881177294 |
Warranty and Support
Warranty Information
All products purchased have a 30-day replacement parts policy to ensure a fully working item. All products are covered under a 1-year warranty when purchased on Amazon. The warranty period begins on the day the product is originally shipped. The warranty covers all items and conditions identified in the original manufacturer's warranty. Some items specifically not covered by the warranty include loss and theft, water damage, customer abuse, and finish deterioration due to UV or coastal exposure. A limited lifetime warranty may also apply to certain components; refer to the original manufacturer's documentation for details.
Customer Support
For technical assistance, parts replacement, or warranty inquiries, please contact Craftmade customer support:
Phone: (800) 486-4892
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.







