1. Introduction
This manual provides essential information for the proper use and maintenance of your Soundsation CAB-IP65-DMX XLR Cable. This 1.5-meter DMX cable is designed for professional audio and lighting applications, featuring IP65-rated 3-pin male and female XLR connectors for reliable performance in challenging environments.
2. Product Features
- IP65 Rated Connectors: Provides protection against dust and water jets, suitable for outdoor and demanding conditions.
- DMX Compatibility: Specifically designed for DMX (Digital Multiplex) signal transmission in lighting systems.
- XLR 3-Pin Connectors: Standard male and female 3-pin XLR connectors ensure broad compatibility.
- Durable Construction: Built for longevity and reliable performance.
- Length: 1.5 meters (approximately 4.9 feet).
3. Setup
- Identify Connectors: Locate the male (pins) and female (holes) XLR connectors on the cable.
- Connect to Device 1: Insert the male XLR connector into the DMX output port of your lighting controller or the preceding DMX device. Ensure a firm connection.
- Connect to Device 2: Insert the female XLR connector into the DMX input port of your lighting fixture or the next DMX device in the chain. Ensure a firm connection.
- Secure Connections: For IP65 protection, ensure that the connectors are fully seated and any locking mechanisms (if present on the device ports) are engaged.
Figure 1: The Soundsation CAB-IP65-DMX XLR cable, showing both the male and female 3-pin IP65-rated connectors and the cable length.
4. Operating Instructions
The Soundsation CAB-IP65-DMX cable is a passive component designed for signal transmission. Once properly connected between DMX-compatible devices, it facilitates the flow of DMX control signals. No specific operational steps are required for the cable itself beyond proper connection.
- Ensure all connected devices are powered off before making or breaking connections to prevent potential damage.
- Verify that the DMX signal chain is correctly terminated at the last device to ensure stable signal transmission.
- For outdoor use, ensure that the IP65 rating of the cable connectors is maintained by keeping them free from debris and properly sealed when connected.
5. Maintenance
To ensure the longevity and optimal performance of your DMX cable, follow these maintenance guidelines:
- Cleaning: Wipe the cable and connectors with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, ensuring connectors are completely dry before use.
- Storage: Store the cable coiled neatly to prevent kinks and damage. Avoid extreme temperatures and direct sunlight.
- Inspection: Periodically inspect the cable for any signs of wear, cuts, or damage to the insulation or connectors. Replace if significant damage is observed.
- Connector Care: Keep the connector pins and sockets clean and free of dust or moisture, especially for IP65-rated connections.
6. Troubleshooting
If you experience issues with DMX signal transmission, consider the following:
- No Signal:
- Ensure both ends of the cable are securely connected to the correct input/output ports.
- Verify that the DMX controller and all fixtures are powered on and configured correctly.
- Check for damage to the cable or connectors. Try a different DMX cable if available.
- Intermittent Signal:
- Ensure all connections are tight and not loose.
- Check for kinks or damage in the cable that might cause intermittent contact.
- Verify proper DMX termination at the end of the chain.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Soundsation |
| Model | CAB-IP65-DMX |
| Cable Type | DMX XLR Cable |
| Connector Type | XLR 3-pin Male to XLR 3-pin Female |
| IP Rating | IP65 (Waterproof) |
| Length | 1.5 meters |
| Shape | Round |
| Number of Units | 1 |
Figure 2: Diagram illustrating the dimensions of the IP65 XLR connector, showing a diameter of 23.5mm and a pin spacing of 13mm.
8. Warranty and Support
Information regarding specific warranty terms for the Soundsation CAB-IP65-DMX XLR Cable is not provided in the product details. For warranty claims or technical support, please contact your retailer or the official Soundsation customer service channel.
