1. Introduction
This manual provides instructions for the safe installation, operation, and maintenance of the Topaz 17100LED 100 Watt LED Temporary Work Light. Please read this manual thoroughly before use and retain it for future reference.
The Topaz 17100LED is an LED temporary high bay fixture designed for rugged job site conditions. It is suitable for outdoor use and features a heavy-duty, corrosion-resistant safety cage. Weighing approximately 6 pounds, this fixture includes a three-foot power cord with a pre-installed, self-locking metal hook for easy hanging and portability. The 17100LED offers significant energy savings compared to traditional HID light fixtures and has an estimated operating life of up to 40,000 hours.
2. Safety Information
Always follow basic safety precautions when using electrical products to reduce the risk of fire, electric shock, and personal injury.
- Read all instructions: Before installation or operation, carefully read and understand all instructions provided in this manual.
- Disconnect power: Always disconnect power at the source before installing, servicing, or cleaning the fixture.
- Proper grounding: Ensure the fixture is properly grounded according to local electrical codes.
- Avoid water exposure: While suitable for damp locations, avoid direct exposure to heavy rain or submersion in water.
- Do not modify: Do not attempt to alter or modify the fixture in any way. Unauthorized modifications may void the warranty and create safety hazards.
- Operating temperature: Ensure the operating environment is within the specified temperature range for the fixture.
- Secure mounting: Always ensure the fixture is securely mounted or hung to prevent it from falling.
- Electrical rating: Verify that the power supply voltage matches the fixture's electrical rating (120-277V).
3. Package Contents
The package for the Topaz 17100LED Temporary Work Light includes:
- 1 x Topaz 17100LED LED Temporary Light
4. Setup
The Topaz 17100LED is designed for quick and easy setup.
- Unpack the fixture: Carefully remove the LED temporary light from its packaging. Inspect for any damage that may have occurred during shipping.
- Identify hanging point: Locate a secure and stable structure from which to hang the light. Ensure the hanging point can safely support the weight of the fixture (approximately 6 pounds).
- Hang the fixture: Utilize the pre-installed, self-locking metal hook to securely hang the light from the chosen structure.
- Connect to power: The fixture comes with a 3-foot power cord (Type SVT 300V). Plug the power cord into a standard 120V electrical outlet. Ensure the outlet is functional and provides stable power. The fixture is rated for 120-277V operation.
Image 1: Topaz 17100LED LED Temporary Light showing the integrated hanging hook and safety cage.
5. Operating Instructions
The Topaz 17100LED is designed for straightforward operation.
- Power On: Once the fixture is securely hung and plugged into a live electrical outlet, the light will illuminate immediately.
- Intended Use: This temporary work light is suitable for various commercial and industrial applications, including:
- Parking garages
- New building construction or renovation sites
- Schools and university gymnasiums
- Outdoor work areas
- Retail stores
- Non-Dimmable: Please note that this fixture is not dimmable. It operates at full brightness when powered on.
Image 2: Multiple Topaz 17100LED lights providing illumination in a warehouse environment.
6. Maintenance
The Topaz 17100LED is designed for minimal maintenance due to its durable construction and long-life LED technology.
- Cleaning: Disconnect the power before cleaning. Use a soft, dry, or slightly damp cloth to wipe the exterior of the fixture. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or internal components.
- LED Life: The integrated LED light source has an estimated operating life of up to 40,000 hours and does not require bulb replacement.
- Inspection: Periodically inspect the power cord and hanging hook for any signs of wear or damage. If damage is observed, discontinue use and contact customer support.
7. Troubleshooting
If you encounter issues with your Topaz 17100LED, refer to the following troubleshooting guide:
- Light does not turn on:
- Ensure the power cord is securely plugged into a functional electrical outlet.
- Check the circuit breaker or fuse for the outlet to ensure power is supplied.
- Verify that the power supply voltage is within the fixture's operating range (120-277V).
- Light flickers or dims:
- Ensure a stable power supply. Fluctuations in voltage can cause flickering.
- Check for any loose connections in the power cord or outlet.
If these steps do not resolve the issue, please contact Topaz customer support for further assistance.
8. Specifications
Image 3: Angled view of the Topaz 17100LED, highlighting the LED light source within the protective cage.
| Feature | Detail |
|---|---|
| Model Number | 17100LED |
| Wattage | 100 Watts |
| Luminous Flux | 13,500 Lumens |
| Color Temperature | 5000K Daylight |
| Voltage | 120-277 Volts |
| Bulb Type | Integrated LED |
| Replaces | 400W HID Fixtures |
| Estimated Operating Life | Up to 40,000 hours |
| Item Weight | 6 pounds |
| Product Dimensions | 14 x 7 x 4.5 inches |
| Power Source | Corded-Electric (3-foot SVT 300V cord) |
| Mounting Type | Ceiling (via integrated hook) |
| Special Features | UL Listed Damp Location, Vibration, shock, and impact resistant, Not Dimmable |
| Material | Plastic (housing), Metal (cage) |
9. Warranty Information
The Topaz 17100LED LED Temporary Work Light is covered by a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
The warranty does not cover damage resulting from improper installation, misuse, abuse, accidents, unauthorized repairs, or modifications. For warranty claims or service, please retain your proof of purchase and contact Topaz customer support.
10. Support
For technical assistance, product inquiries, or customer service, please visit the official Topaz website or contact their support department. Refer to the product packaging or the Topaz website for the most current contact information.
When contacting support, please have your product model number (17100LED) and date of purchase readily available.
