Introduction
This manual provides essential information for the proper use and care of your Weber Premium Outdoor Grill Cover, Model 7139. Designed to protect your Spirit 300 or Spirit II 300 series grill, this cover ensures longevity and maintains the condition of your outdoor cooking appliance.
Setup and Installation
Proper installation of your grill cover is crucial for maximum protection. Follow these steps to correctly place the cover on your grill:
- Ensure Grill is Cool: Before covering, always ensure your grill is completely cool to the touch to prevent damage to the cover material.
- Unfold the Cover: Carefully unfold the grill cover, identifying the front (typically marked with the Weber logo).
- Position the Cover: Drape the cover over the top of your grill, aligning the Weber logo with the front of the grill.
- Pull Down Evenly: Pull the cover down evenly over all sides of the grill until it reaches the bottom.
- Secure with Fastening Straps: Locate the fastening straps on the sides of the cover. Securely fasten these straps to prevent the cover from blowing off during strong winds or adverse weather conditions.
Image: A person carefully placing the Weber grill cover over the grill, ensuring it is properly aligned and draped.
Image: Close-up of hands adjusting the hook-and-loop fastening straps on the side of the grill cover to secure it in place.
Video: Demonstrates the process of covering a Weber Spirit 300 Series grill, highlighting the ease of use and secure fit provided by the cover's design and fastening straps.
Operating (Protection Features)
The Weber Premium Outdoor Grill Cover is designed to provide robust protection for your grill against various environmental elements. Understanding its features helps maximize its effectiveness:
- Water-Resistant Material: The cover is crafted from premium quality, water-resistant fabric to shield your grill from rain and snow, preventing rust and corrosion.
- UV Inhibitors: Integrated UV inhibitors in the fabric resist fading, ensuring the cover maintains its appearance and protective qualities over time, even with prolonged sun exposure.
- Breathable Design: While water-resistant, the material is also breathable, which helps prevent moisture buildup under the cover that could lead to mold or mildew.
- Secure Fit: The cover is specifically designed for Spirit 300 and Spirit II 300 series grills (prior to 2025) and Spirit 400 Series models with 4 main burners, ensuring an optimal and snug fit that protects all critical components.
Image: The Weber Premium Outdoor Grill Cover fully installed on a grill, showcasing its complete coverage and tailored fit.
Video: A user demonstrating the secure fit and durable material of the Weber grill cover, emphasizing its protective qualities against weather elements.
Maintenance and Care
To ensure your Weber grill cover remains effective and extends its lifespan, follow these simple cleaning instructions:
- Spot Clean Only: Use a soft cloth or sponge with mild soap and water to spot clean any dirt or stains on the cover.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, bleach, or solvents, as these can damage the fabric and its protective coatings.
- Air Dry: Allow the cover to air dry completely before folding and storing, or before placing it back on the grill. Do not machine wash or tumble dry.
- Regular Inspection: Periodically inspect the cover for any signs of wear, tears, or damage. Addressing minor issues promptly can prevent further deterioration.
Troubleshooting
Here are solutions to common issues you might encounter with your grill cover:
- Cover Blows Off in Wind: Ensure the fastening straps are securely tightened around the grill. The hook-and-loop closures are designed to keep the cover in place even during strong winds.
- Water Accumulation on Top: While the cover is water-resistant, prolonged pooling of water can occur. Ensure the grill is positioned on a level surface and that the cover is draped to allow water to run off.
- Fading or Discoloration: The cover includes UV inhibitors to resist fading. However, extreme, prolonged exposure to direct sunlight over many years can still cause some natural wear. Regular cleaning can help maintain its appearance.
- Difficulty Putting On/Taking Off: The cover is designed to be lightweight for easy handling. If you experience difficulty, ensure the grill is completely cool and try to evenly distribute the cover's weight as you lift or lower it.
Specifications
Detailed specifications for the Weber Premium Outdoor Grill Cover, Model 7139:
| Feature | Detail |
|---|---|
| Brand | Weber |
| Model Number | 7139 |
| Material | Polyester |
| Color | Black |
| Product Dimensions | 10.26"L x 7.35"W x 4.2"H (Packaged) |
| Closure Type | Hook and Loop |
| Item Weight | 1 pounds |
| Compatibility | Spirit 300 Series grills (prior to 2025), Spirit II 300 Series grills, Spirit 400 Series models with 4 main burners |
Image: A visual representation of the grill cover's dimensions (H: 42", W: 51", D: 27") and compatible Spirit series gas grills.
Warranty and Support
For information regarding warranty coverage, product support, or to purchase replacement parts, please visit the official Weber website or contact Weber customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.
Contact Information: Refer to the official Weber website or product packaging for the most current customer support details.
