hansgrohe 04701805

hansgrohe Talis Loop Stainless Steel High Arc Kitchen Faucet

Model: 04701805

Brand: hansgrohe

1. Introduction

The hansgrohe Talis Loop kitchen faucet combines modern design with functional details for your kitchen sink. This manual provides essential information for the proper installation, operation, and maintenance of your faucet.

hansgrohe Talis Loop Stainless Steel Optic High Arc Kitchen Faucet.

The hansgrohe Talis Loop High Arc Kitchen Faucet in Stainless Steel Optic features a modern design with a high-arc spout and integrated pull-down sprayer.

Key Features:

  • Modern Functionality: Flexible design suitable for various kitchen ambiances.
  • Durable Finish: High-quality Stainless Steel Optic surface, resistant to scratches (PVD technology).
  • Enhanced Movement: 150° swivel spout for increased access to the kitchen sink.
  • Pull-Down Sprayer: Provides extended reach for targeted rinsing of items.
  • Dual Spray Modes: Easily switch between crystal clear laminar and gentle shower spray.
  • MagFit Magnetic Holder: Securely holds the pull-out spray head in the center of the spout.

2. Setup and Installation

Proper installation is crucial for the optimal performance and longevity of your hansgrohe faucet. It is highly recommended that a licensed plumber installs this product.

Technical drawing with dimensions of the hansgrohe Talis Loop kitchen faucet.

This diagram illustrates the precise dimensions and clearances required for the hansgrohe Talis Loop kitchen faucet, including spout height, reach, and installation depth.

Connection Details:

  • The faucet includes flexible 3/8-inch hoses for quick connection to standard angle valves.
  • Ensure connections are tightened by hand first, then turn an additional 1/4 to 1/2 turn with a wrench. Avoid overtightening, as this can cause leaks.
  • Do not use sealant or Teflon tape on these types of connectors, as they are designed to seal without them and tape can interfere with the seal.
Illustration of the easy installation process for the hansgrohe kitchen faucet.

This image demonstrates the simplified installation steps, highlighting features designed for user-friendly setup.

3. Operating Instructions

Your hansgrohe Talis Loop faucet is designed for intuitive and efficient use.

Handle Operation:

  • The single handle controls both water flow and temperature.
  • Lift the handle to increase water flow.
  • Move the handle to the left for hot water and to the right for cold water.

Pull-Down Sprayer and Spray Modes:

  • Gently pull down the spray head from the spout to extend it for greater reach.
  • Press the button located directly on the spray head to switch between the two available spray modes:
  • Laminar Spray: A clear, non-aerated stream ideal for quickly filling pots.
  • Shower Spray: A gentle, aerated spray suitable for rinsing fruits, vegetables, and delicate dishes.
  • The MagFit magnetic holder ensures the spray head retracts smoothly and securely into its position when not in use.
Close-up view of the faucet's laminar spray and needle spray modes.

The faucet offers two distinct spray modes: a clear laminar stream for filling pots quickly and a gentle needle spray for rinsing delicate items like fruits and vegetables.

4. Maintenance

Regular cleaning and maintenance will help preserve the appearance and functionality of your hansgrohe faucet.

Cleaning and Care:

  • Clean the faucet regularly with a mild soap and water solution. Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the finish.
  • Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
  • QuickClean Feature: The faucet is equipped with QuickClean silicone inserts on the spray nozzles. To remove limescale deposits, simply rub these silicone nozzles with your finger. This allows for easy and effective cleaning without special tools.
Diagram illustrating the QuickClean function for easy limescale removal.

The QuickClean feature allows for effortless removal of limescale deposits from the faucet's silicone nozzles by simply rubbing them with a finger.

5. Troubleshooting

If you encounter issues with your faucet, refer to the following common troubleshooting tips:

  • Low Water Pressure: Check if the shut-off valves under the sink are fully open. Ensure there are no kinks in the supply lines. The faucet features a laminar flow, which may appear different from aerated flows but provides efficient water delivery.
  • Leaks at Connections: If leaks occur at the supply line connections, ensure they are hand-tightened and then given only an additional 1/4 to 1/2 turn with a wrench. Overtightening can damage the seals and cause leaks. Verify that no sealant or tape was used on these specific connections.
  • Reduced Spray Performance: If the spray modes are weak or uneven, check the QuickClean nozzles for limescale buildup and rub them to clear any blockages.
  • Handle Stiffness: If the handle becomes stiff, it may indicate mineral buildup. Consult a professional plumber for internal cleaning or cartridge replacement.

For persistent issues, contact hansgrohe customer support or a qualified plumber.

6. Specifications

FeatureDetail
Brandhansgrohe
Model NameTalis Loop
Model Number04701805
ColorStainless Steel Optic
Style NameHighArc
Mounting TypeSingle-hole
Number of Handles1
Handle TypeLoop
MaterialStainless Steel
Finish TypeBrushed
Spout DesignHighArc
Spout Height10 Inches
Special FeaturePull Down Sprayer
Flow Rate5 Liters Per Minute
Item Weight3.35 Pounds
Included ComponentsKitchen faucet, Connection hoses
Comparison of Chrome and Steel Optic finishes for the hansgrohe Talis Loop faucet.

The hansgrohe Talis Loop kitchen faucet is available in various finishes, including the durable Chrome and the scratch-resistant Stainless Steel Optic.

7. Warranty Information

Hansgrohe, Inc. provides a comprehensive warranty for its products:

Hansgrohe, Inc. warrants to the original consumer purchaser that hansgrohe products will be free from defects in material and workmanship for as long as the original consumer purchaser owns both the product and the home in which the product was originally installed. For commercial purchasers, the warranty period is (a) one (1) year for hansgrohe products from the date of purchase. The warranty period for products in the Rubbed Bronze, Matte Black, Matte White finishes is three (3) years from the date of purchase. This warranty is non-transferable. Because Hansgrohe, Inc. is unable to control the quality of hansgrohe products sold by unauthorized sellers, unless otherwise prohibited by law, this warranty does not cover hansgrohe products purchased from unauthorized sellers. Authorized sellers can be found on hansgrohe branded websites. Additional warranty restrictions apply. See manufacturer website for full warranty details.

8. Customer Support

For further assistance, product registration, or to view the full warranty details, please visit the official hansgrohe website or contact their customer service.

Visit the hansgrohe Store: hansgrohe Official Store

© 2023 hansgrohe. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.