Blackweb BWB17AV002 Universal Remote Control User Manual

Introduction

The Blackweb BWB17AV002 6-Device Universal Remote Control is designed to simplify your home entertainment experience by consolidating control of multiple devices into a single unit. This manual provides detailed instructions for setting up, programming, and operating your remote control.

Getting Started

Battery Installation

Your Blackweb BWB17AV002 remote requires two AAA batteries (not included). Follow these steps to install them:

1. Slide open the battery compartment cover located on the back of the remote.
2. Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align with the markings inside the compartment.
3. Slide the battery compartment cover back into place until it clicks securely.

Image: Rear view of the Blackweb BWB17AV002 Universal Remote Control with the battery compartment open, showing two AAA batteries inserted.

Remote Control Layout

Familiarize yourself with the buttons on your Blackweb BWB17AV002 remote:

Image: Front view of the Blackweb BWB17AV002 Universal Remote Control, displaying all buttons including power, input, device selection, navigation, volume, channel, and numeric keys.

Programming Your Remote

The Blackweb BWB17AV002 Universal Remote Control can be programmed using direct code entry or automatic code search. It is recommended to try direct code entry first, as it is often quicker. If the first code for your device does not work, try other codes listed for your brand.

Direct Code Entry

1. Turn on the device you wish to program (e.g., TV, DVD player).
2. On the remote, press and hold the SETUP button until the red indicator light (usually the Power button LED) turns solid red.
3. Press the device button you want to program (e.g., TV, STR, AUD). The red indicator light will blink once and then remain solid.
4. Enter the 4-digit code for your device's brand from the provided code list. The red indicator light will turn off if the code is accepted. If the light flashes and remains on, the code was not accepted; try again or use a different code.
5. Test the remote by pressing various functions (e.g., Power, Volume, Channel). If all functions work, programming is complete. If some functions do not work, repeat the process with the next code for your brand.

Automatic Code Search

If direct code entry is unsuccessful, you can use the automatic code search feature:

1. Turn on the device you wish to program.
2. On the remote, press and hold the SETUP button until the red indicator light turns solid red.
3. Press the device button you want to program (e.g., TV, STR, AUD). The red indicator light will blink once and then remain solid.
4. Point the remote at the device and press the POWER button repeatedly (approximately every 2 seconds). The remote will send out codes until the device turns off.
5. Once the device turns off, immediately press the OK button to save the code.
6. Test the remote by pressing various functions. If all functions work, programming is complete. If some functions do not work, repeat the process, as the remote may have stopped on a partial match.

Code List Reference

The Blackweb BWB17AV002 comes with an extensive code list supporting thousands of new and legacy audio/video devices. Always refer to this list to find the appropriate codes for your specific brand and device type.

Operating Your Remote

Button Functions

• POWER: Turns the selected device on or off.
• INPUT: Cycles through available input sources on your TV.
• TV/STR/AUD: Device selection buttons to control TV, Streaming devices, or Audio equipment.
• VOL +/-: Adjusts the volume level.
• CH +/-: Changes channels.
• OK: Confirms selections in menus.
• MENU: Accesses the menu of the selected device.
• APP: Accesses smart TV applications.
• Navigation Arrows: Used to navigate through menus and options.
• Numeric Keypad (0-9): Enters channel numbers or codes.
• Colored Buttons (A, B, C, D): May have specific functions depending on the device or application.
• Playback Controls: Play, Pause, Stop, Rewind, Fast Forward, Record.

Maintenance

Battery Precautions

• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cd, Ni-MH, etc.) batteries.
• Always remove old, weak, or worn-out batteries promptly and recycle or dispose of them in accordance with local and national regulations.
• If the remote stops operating properly, replace the batteries with new ones.

Troubleshooting

Common Issues

• Remote not responding: Ensure batteries are correctly installed and not depleted. Replace if necessary.
• Some buttons not working: This may indicate a partial code match. Try other codes for your device's brand using the direct code entry method.
• Red indicator light behavior: If the light flashes and remains on after entering a code, the code was not accepted. If it turns off, the code was accepted.
• Ensure there are no obstructions between the remote and the device's infrared sensor.

Specifications

Warranty and Support

For warranty information or technical support regarding your Blackweb BWB17AV002 Universal Remote Control, please refer to the contact details provided with your purchase or visit the official Blackweb website. Keep your proof of purchase for any warranty claims.