ORACAL High Tack Transfer Tape User Manual

1. Product Overview

The ORACAL High Tack Transfer Tape (24" x 300ft) is a semi-transparent application tape designed for the problem-free premasking of die-cut or computer-cut vinyl graphics. It is particularly effective with decorative films such as ORACAL 651, ORACAL 631, ORACAL 8810 Frosted Glass Film, ORAMASK 813 & 811, ORACAL 8510 Translucent Etched Glass, ORACAL 8710 Dusted Glass Film, Precise Vinyl, and Glitter Vinyl.

This bulk value roll provides 300 feet (100 yards) of high-quality, linerless transfer tape. It is engineered to work effectively with both matte and glossy vinyls and is suitable for picking up small to large decals without damaging the underlying surface. It is a versatile tool for crafters, sign makers, and automotive applications.

Image 1.1: Three rolls of ORACAL High Tack Transfer Tape, illustrating different available widths or lengths. The tape is semi-transparent and appears white on the roll.

2. Setup and Preparation

Proper preparation is crucial for successful application of vinyl graphics using ORACAL High Tack Transfer Tape.

2.1 Unrolling the Tape

Carefully unroll the desired length of transfer tape from the bulk roll. Ensure the tape remains free of creases or wrinkles, which can affect application quality.

2.2 Surface and Vinyl Preparation

• Ensure the vinyl graphic is clean and free of dust or debris.
• For optimal adhesion, the application surface (e.g., glass, wall) should also be clean, dry, and free of oils or contaminants.
• If applying to a painted surface, ensure the paint is fully cured to prevent damage upon removal.

3. Operating Instructions

Follow these steps for effective application of vinyl graphics using ORACAL High Tack Transfer Tape.

3.1 Applying Transfer Tape to Vinyl

1. Lay the vinyl graphic flat with the release liner facing down.
2. Carefully align the ORACAL High Tack Transfer Tape over the vinyl graphic, ensuring it covers the entire design.
3. Starting from one edge, slowly apply the transfer tape to the vinyl, using a squeegee (a free blue applicator squeegee is included with the product) to smooth out any air bubbles and ensure firm adhesion. Work from the center outwards.
4. Firmly burnish the transfer tape onto the vinyl using the squeegee, applying even pressure across the entire design.

3.2 Transferring the Vinyl Graphic

5. Slowly peel the transfer tape away from the vinyl's release liner at a sharp angle (180 degrees). Ensure the vinyl graphic adheres completely to the transfer tape. If parts of the graphic do not lift, lay the tape back down and re-burnish.
6. Position the transfer tape with the vinyl graphic onto your desired application surface.
7. Starting from the center, firmly apply the graphic to the surface using the squeegee, working outwards to remove any air bubbles.
8. Once the graphic is fully adhered, slowly peel the ORACAL High Tack Transfer Tape away from the vinyl graphic at a sharp angle. If the vinyl lifts, lay the tape back down and re-burnish.
9. Discard the used transfer tape.

4. Maintenance and Storage

Proper storage ensures the longevity and effectiveness of your ORACAL High Tack Transfer Tape.

• Store the transfer tape in its original packaging or a protective container to prevent dust and debris accumulation.
• Keep the tape in a cool, dry environment, away from direct sunlight and extreme temperatures.
• Avoid storing the tape on its side for extended periods to prevent flattening or deformation of the roll. Store upright if possible.

5. Troubleshooting

Common issues and their solutions when using ORACAL High Tack Transfer Tape.

6. Specifications

7. Warranty and Support

For specific warranty information or technical support regarding your ORACAL High Tack Transfer Tape, please refer to the official ORACAL website or contact their customer service directly. Product performance is subject to proper application and storage conditions.

You can visit the official ORACAL store for more information: ORACAL Store on Amazon.