FREDORCH F2
FREDORCH F2 Automatic Retractable Thrusting Machine User Manual
Model: F2
Introduction
This manual provides comprehensive instructions for the safe and effective use of your FREDORCH F2 Automatic Retractable Thrusting Machine. Please read thoroughly before operation and retain for future reference.
Important Safety Notice: This product is intended for adult use only (18+). Ensure all components are securely assembled before use. Discontinue use if any discomfort or malfunction occurs.
Package Contents
Verify that all items are present in the package:
- FREDORCH F2 Thrusting Machine Base Unit
- Power Adapter with Controller
- Various Attachments (e.g., dildos, extension tubes)
- User Manual (this document)
Image: Overview of the FREDORCH F2 machine with included attachments and power controller.
Image: Close-up of various attachments, including a vibrating dildo, a heating dildo, and double extension tubes, with their approximate dimensions.
Setup Instructions
Follow these steps to set up your FREDORCH F2 machine:
- Secure the Base: Place the machine on a clean, smooth, and non-porous surface. Press down firmly on the four suction cups located on the base plate to ensure a secure attachment. This prevents movement during operation.
- Attach Accessory: Select your desired attachment (e.g., dildo, extension tube). Connect it securely to the 3XLR connector on the motor unit. Ensure it is twisted firmly into place.
- Adjust Angle: Use the rotary knob to adjust the angle of the thrusting mechanism to your preferred position. The machine offers an adjustable angle range from approximately -45° to 120°.
- Connect Power: Plug the power adapter into the machine's power input port, then connect the adapter to a standard electrical outlet.
Image: Labeled diagram illustrating the main components (Motor, 3XLR Connector, Rotary Knob, Suction Cup, Base Plate, Controller) and sequential setup steps.
Image: Visual representation of the machine's adjustable angle feature, showing examples of different postures such as Doggy Posture (45°), Missionary Posture (0°), Female Upper (90°), and Behind Posture (-45°).
Operating Instructions
Once the machine is set up, follow these steps for operation:
- Power On: Turn the knob switch on the wired controller to the 'ON' position.
- Adjust Speed: Rotate the knob on the controller to adjust the thrusting speed. The speed can be varied from 70 to 210 strokes per minute. Start at a low speed and gradually increase to your preference.
- Thrusting Depth: The machine provides a thrusting depth of up to 1.57 inches.
- Power Off: After use, turn the knob switch on the controller to the 'OFF' position and unplug the power adapter from the wall outlet.
Image: The FREDORCH F2 machine highlighting the wired controller for speed adjustment and indicating a maximum thrusting depth of up to 1.57 inches.
Maintenance and Care
Proper maintenance ensures the longevity and hygiene of your FREDORCH F2 machine:
- Cleaning Attachments: After each use, detach any accessories and clean them thoroughly with warm water and a mild, toy-safe soap. Rinse completely and allow to air dry.
- Cleaning Machine Body: Wipe the main unit with a damp cloth. Do not submerge the machine or its electrical components in water. Avoid harsh chemicals or abrasive cleaners.
- Storage: Store the machine and its accessories in a clean, dry place, away from direct sunlight and extreme temperatures.
Troubleshooting
If you encounter any issues with your FREDORCH F2 machine, refer to the following common problems and solutions:
| Problem | Possible Cause / Solution |
|---|---|
| Machine stalls or slows under pressure. | The motor may be overloaded. Reduce resistance or ensure the power supply is stable. Verify the power adapter is correctly connected. |
| Machine moves during operation. | The suction cups may not be securely attached. Ensure the surface is clean, smooth, and non-porous. Dampening the suction cups slightly can improve adhesion. |
| Excessive noise during operation. | Ensure all attachments are securely fastened. Operating on a stable, flat surface can help reduce vibrations. Note that some operational noise is normal for mechanical devices. |
| Insufficient thrusting strength. | Verify the speed controller is set to the desired level. Ensure the power adapter is correctly connected and providing adequate power. |
Specifications
- Model: F2
- Brand: FREDORCH
- Rated Power: 17W
- Maximum Power: 93W
- Input Voltage: 100V to 240V (Universal)
- Output Voltage: DC 12V/24V
- Adjustable Angle: Approximately -45° to 120°
- Thrusting Speed: 70 to 210 strokes per minute
- Thrusting Depth: Up to 1.57 inches (4 cm)
- Net Weight: 1.7 KG (approximately 3.75 lbs)
- Package Dimensions: 15.24 x 10.28 x 6.61 inches
- ASIN: B077G83Y5V
Image: Diagram showing the dimensions of the FREDORCH F2 machine, including height, width, and base measurements, along with its net weight.
Image: Details on the FREDORCH F2 machine's electrical specifications (output/input voltage) and stroking speed range.
Warranty and Support
For warranty information or technical support, please refer to the documentation included with your purchase or contact FREDORCH customer service directly. Contact details can typically be found on the manufacturer's official website or product packaging.