Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your MINKA-AIRE F896-84 Xtreme H2O 84 Inch Outdoor Ceiling Fan. Please read all instructions carefully before beginning installation to ensure safe and proper use of the product. Keep this manual for future reference.

Figure 1: MINKA-AIRE F896-84 Xtreme H2O 84 Inch Outdoor Ceiling Fan, Oil Rubbed Bronze finish.
Safety Information
Always follow basic safety precautions when installing and operating this ceiling fan to reduce the risk of fire, electric shock, and personal injury. This product is designed for outdoor use and is wet-rated, but proper installation is crucial.
- Ensure the installation site is structurally sound and can support the fan's weight.
- All electrical wiring must be performed by a qualified electrician and comply with local codes and regulations.
- Disconnect power at the circuit breaker before installation or servicing.
- Keep hands, clothing, and other objects clear of the fan blades during operation.
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 warning).
Package Contents
Verify that all components are present before beginning installation:
- MINKA-AIRE F896-84 Xtreme H2O Ceiling Fan unit
- 8 Oil Rubbed Bronze Blades
- One 6-Inch Downrod
- One RC400 - Six-speed hand-held remote with on/off, full-range light dimming, and forward/reverse functions
- Mounting hardware and instruction manual

Figure 2: Key features and included components of the Xtreme H2O fan.
Setup & Installation
The MINKA-AIRE F896-84 Xtreme H2O is designed for both indoor and outdoor use, with a wet rating for exposed locations. Ensure proper mounting and electrical connections.
Dimensions and Mounting
The fan measures 13.5 inches from the ceiling to the bottom of the fan with the included 6-inch downrod. It has a blade sweep diameter of 84 inches with a 9-degree blade pitch. For optimal performance and safety, ensure adequate clearance from walls and other obstructions.
Figure 3: Dimensional drawing of the F896-84 fan.
Downrod Installation
The fan comes with a 6-inch downrod. Longer downrods are available for separate purchase if your ceiling height requires it. Ensure the downrod is securely fastened to both the mounting bracket and the fan motor housing.
Figure 4: Example downrod options (6-inch downrod included).
Operating Instructions
Your MINKA-AIRE F896-84 fan is equipped with a quiet DC motor and controlled by a hand-held remote.
Remote Control (RC400)
The included RC400 remote control allows you to manage the fan's functions:
- Six-Speed Control: Adjust fan speed from 1 (lowest) to 6 (highest).
- On/Off: Power the fan on or off.
- Full-Range Light Dimming: If an optional light kit is installed, control the light intensity.
- Forward/Reverse: Change the direction of blade rotation for seasonal comfort. Forward rotation (counter-clockwise) creates a downdraft for cooling, while reverse rotation (clockwise) creates an updraft to circulate warm air.
Figure 5: RC400 Hand-Held Remote Control.
Optional Light Kit
A custom 20W LED Light Kit (Model K9886L-ORB) is available for separate purchase. Refer to the light kit's instructions for installation and operation details.
Figure 6: Optional K9886L-ORB LED Light Kit (sold separately).
Product Overview Video
Video 1: A Closer Look at the Xtreme Collection by Minka-Aire. This video provides a visual overview of the fan's design and features.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your ceiling fan.
- Cleaning: Use a soft, damp cloth to clean the fan blades and motor housing. Avoid abrasive cleaners that may damage the finish.
- Blade Inspection: Periodically check the blades for any signs of damage or warping. Ensure all blade screws are tight.
- Motor Housing: Ensure the motor housing is free from dust and debris to prevent overheating.
- Mounting Hardware: Annually check all mounting hardware for tightness to ensure the fan remains securely attached to the ceiling.
Troubleshooting
If you encounter issues with your fan, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start or spins slowly | Loose wiring, incorrect remote pairing, motor issue. | Check all electrical connections. Ensure remote is properly paired. If the fan starts slowly, this may be normal for large fans to reach full RPM. If no movement, contact support. |
| Fan makes unusual noise | Loose screws, unbalanced blades, internal motor component issue. | Verify all blade and mounting screws are tight. Check for any obstructions. If noise persists or increases over time, especially at higher speeds, it may indicate an internal motor issue. Contact support for further assistance. |
| Remote control not working | Dead batteries, remote not paired, interference. | Replace remote batteries. Re-pair the remote with the fan according to the remote's instructions. Ensure no strong interference sources are nearby. |
Specifications
Detailed specifications for the MINKA-AIRE F896-84 Xtreme H2O 84 Inch Outdoor Ceiling Fan:
| Feature | Detail |
|---|---|
| Brand | MINKA-AIRE |
| Model Name | F896-84-ORB |
| Color | Oil Rubbed Bronze |
| Electric Fan Design | Ceiling Fan |
| Power Source | DC Motor |
| Style | Modern |
| Product Dimensions (D x W x H) | 84"D x 84"W x 13.75"H |
| Room Type | Home Office (suitable for large indoor/outdoor spaces) |
| Special Features | Remote Controlled, Wi-Fi Enabled |
| Recommended Uses | Air Circulation |
| Mounting Type | Ceiling Mount |
| Controller Type | Remote Control |
| Number of Speeds | 6 |
| Wattage | 41.00 W |
| Number of Blades | 8 |
| Air Flow Capacity | 8165 Cubic Feet Per Minute |
| Speed | 250 RPM |
| Voltage | 120 Volts |
| Indoor/Outdoor Usage | Outdoor |
| Control Method | Remote |
| Light Type | LED (optional, sold separately) |
| Standby Power Shutoff | Efficient |
| Is Product Cordless | No |
| Number of Power Levels | 6 |
| Material | Metal, Plastic |
| Blade Material | Acrylonitrile Butadiene Styrene (ABS) |
| Finish Type | Bronze |
| Collection Name | Xtreme |
| Item Weight | 22.31 Pounds |
| Manufacturer | Minka Lighting LLC |
| UPC | 706411058417, 663481920764 |
| ASIN | B077F2NRTS |
Figure 7: Room size recommendations for ceiling fans.
Warranty
The MINKA-AIRE F896-84 Xtreme H2O Ceiling Fan comes with a limited warranty. For specific terms and conditions, please refer to the warranty documentation included with your product or contact MINKA-AIRE customer service.
Support
For technical assistance, replacement parts, or further inquiries, please contact MINKA-AIRE customer support. Refer to the contact information provided in your product packaging or visit the official MINKA-AIRE website.





