KONQUEST KBP-2910W Automatic Wrist Blood Pressure Monitor User Manual

Introduction

Thank you for choosing the KONQUEST KBP-2910W Automatic Wrist Blood Pressure Monitor. This device is designed to provide accurate and reliable blood pressure and pulse rate measurements. Please read this manual thoroughly before use to ensure proper operation and to understand important safety information.

Safety Information

• Do not talk while taking your blood pressure.
• Ensure your arm is positioned correctly.
• Always use the same arm when taking your blood pressure.
• Rest your arm, raised to the level of your heart, on a table, desk, or chair arm.
• Do not apply the cuff over clothing. If wearing a long-sleeved shirt, roll the sleeve back to the forearm.
• Do not stand while testing. Sit in a comfortable position with your back supported, feet flat on the floor, and legs uncrossed.

Product Overview

The KONQUEST KBP-2910W monitor features a large, easy-to-read LCD display and a comfortable wrist cuff. It is designed for quick and accurate measurements.

Figure 1: Digital Blood Pressure Monitor with labeled parts including 2 user indicator, wrist cuff, WHO blood pressure classification indicator, date and time stamp, set button, start/stop button, memory button, systolic blood pressure, diastolic blood pressure, and pulse rate.

Setup

Battery Installation

The monitor requires 2 AAA batteries. These are typically included with your purchase. Insert the batteries into the compartment according to the polarity indicators.

Figure 2: The Konquest KBP-2910W monitor, owner's manual, and two AAA batteries, indicating readiness for use.

Cuff Placement

1. With the unit off, place it about half an inch away from your wrist.
2. Wrap the cuff snugly around your wrist. You should only be able to get a single finger underneath the cuff.
3. Ensure the distance between the top of the BP Monitor and the hand is between 1/2 - 1 inch.
4. For an accurate reading, make sure that your wrist is at heart level.

Figure 3: Visual guide demonstrating the correct steps for placing the wrist cuff and positioning the arm for a blood pressure measurement.

Setting User and Time

The device supports two users and stores up to 120 measurements per user. To switch between users or set the date and time, use the 'SET' and 'M' buttons as described in the video below.

Operating Instructions

Taking a Measurement

1. Ensure the cuff is correctly placed on your wrist and your arm is positioned at heart level.
2. Press the START/STOP button to begin the measurement. The cuff will inflate automatically.
3. Remain still and silent during the measurement.
4. The monitor will display your Systolic, Diastolic, and Pulse Rate readings once complete.
5. When the unit shows results, remove the cuff.

Figure 4: The Konquest KBP-2910W monitor displaying blood pressure readings on its large, backlit LCD screen, highlighting its one-button operation.

Understanding Your Readings

The monitor includes a Blood Pressure Indicator that categorizes your reading based on WHO guidelines. The color bar on the left side of the display will indicate your blood pressure stage.

Figure 5: The monitor's display showing a blood pressure reading alongside a color-coded indicator that corresponds to different blood pressure stages as defined by the World Health Organization.

Memory Function

The KBP-2910W automatically records up to 120 measurements with date and time for each of the two users. To review past measurements, press the M (Memory) button.

Figure 6: The monitor's display showing several past blood pressure readings, including systolic, diastolic, pulse, date, and time, for two distinct users.

Irregular Heartbeat Detection

The monitor will automatically alert you if it detects an irregular heartbeat during measurement. Consult your physician if irregular heartbeats are frequently detected.

Features

• Quick and accurate results in under 1 minute.
• Individually tested for accuracy.
• User-friendly one-button push-to-start design.
• Adjustable cuff fits wrists from 5 1/4” - 8 1/2” in circumference.
• 2 user capability with 120 measurement memory per user, including date and time.
• Displays pulse rate.
• Irregular heartbeat detection.
• Large screen display.
• Portable case included.

Care and Maintenance

• Keep the device clean by wiping it with a soft, dry cloth.
• Do not use abrasive cleaners or immerse the device in water.
• Store the monitor in its portable case when not in use to protect it from dust and damage.
• Remove batteries if the device will not be used for an extended period.

Figure 7: The Konquest KBP-2910W monitor neatly stored within its durable hard case, emphasizing portability and protection.

Troubleshooting

If you encounter issues with your monitor, please check the following:

• No display: Check if batteries are inserted correctly and have sufficient charge. Replace if necessary.
• Inaccurate readings: Ensure proper cuff placement and arm positioning. Avoid talking or moving during measurement. Ensure the cuff is snug but not overly tight.
• Error messages: Refer to the owner's manual for specific error code explanations.

If problems persist, contact customer support.

Specifications

Warranty and Support

The KONQUEST KBP-2910W Automatic Wrist Blood Pressure Monitor comes with a 2-year limited warranty. For warranty claims, technical support, or further assistance, please refer to the contact information provided in your owner's manual or visit the official KONQUEST website.