Supermicro MCP-290-10108-0B Dual System Tray Instruction Manual

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Supermicro MCP-290-10108-0B Dual System Tray. This 1U rack mounting kit is designed to securely house two Mini-ITX systems, optimizing space within a standard server rack environment. Please read this manual thoroughly before proceeding with installation or operation to ensure proper usage and to prevent damage to the equipment.

Safety Information

• Always disconnect power from all components before installation or maintenance.
• Ensure proper grounding to prevent electrical hazards.
• Handle components with care to avoid electrostatic discharge (ESD) damage.
• Install the tray in a well-ventilated area to prevent overheating.
• Refer to the individual Mini-ITX system manuals for specific safety guidelines related to those components.

Package Contents

Verify that all items are present and undamaged upon unpacking:

• Supermicro MCP-290-10108-0B Dual System Tray (1 unit)
• Mounting screws and hardware (quantity may vary)
• Quick Installation Guide (if applicable, otherwise refer to this manual)

Note: Mini-ITX systems and power supplies are sold separately and are not included with this tray.

Setup

1. Rack Installation

1. Identify the desired 1U rack space for the tray.
2. Align the rackmount ears of the Supermicro Dual System Tray with the mounting holes on the server rack posts.
3. Secure the tray to the rack using the provided rack screws. Ensure all screws are tightened evenly to prevent misalignment.

2. Mini-ITX System Installation

The tray is designed to accommodate two Mini-ITX systems. Follow these steps for each system:

1. Carefully slide the Mini-ITX system into one of the designated slots within the tray. Ensure it seats properly.
2. Secure the Mini-ITX system to the tray using the appropriate screws (refer to your Mini-ITX system's manual for mounting points).
3. Repeat for the second Mini-ITX system.

3. Cable Management

Route all power, data, and network cables neatly. The tray provides space for cable organization to maintain airflow and ease of access.

• Connect power cables to each Mini-ITX system and their respective power supplies (if external).
• Connect network cables to the Mini-ITX systems' Ethernet ports.
• Connect any necessary peripheral cables (e.g., USB, video) as required by your setup.

This image displays the Supermicro MCP-290-10108-0B Dual System Tray, a 1U rackmount solution designed to house two Mini-ITX systems side-by-side. The tray is black, with two system units visible, each featuring a front mesh panel and power/reset buttons. The rackmount ears are visible on both sides.

Operating

The Supermicro Dual System Tray is a passive mounting solution. Operation of the Mini-ITX systems housed within the tray is governed by their individual power and control mechanisms.

• Power On/Off: Refer to the instruction manual of your specific Mini-ITX system for power-on and power-off procedures. Typically, this involves pressing the power button on the front panel of each system.
• Indicator Lights: Any indicator lights (e.g., power, activity) will be located on the front panel of the individual Mini-ITX systems. Consult their respective manuals for interpretation.

Maintenance

1. Cleaning

• Periodically inspect the tray and systems for dust accumulation.
• Use a soft, dry cloth to wipe down external surfaces.
• For internal cleaning of the Mini-ITX systems, refer to their specific manuals. Ensure power is disconnected before any internal cleaning.

2. Inspection

• Regularly check all cable connections to ensure they are secure.
• Verify that mounting screws remain tight.
• Ensure adequate airflow around the systems within the rack.

Troubleshooting

This section addresses common issues related to the Supermicro Dual System Tray. For issues specific to the Mini-ITX systems, consult their individual manuals.

• System Not Powering On:
  • Verify that the Mini-ITX system's power cable is securely connected to both the system and a functional power outlet.
  • Ensure the power supply unit (if external) is functioning correctly.
  • Confirm the power button on the Mini-ITX system is being pressed correctly.
• Loose in Rack:
  • Check all rack mounting screws and tighten them if necessary.
  • Ensure the rack itself is stable and properly installed.
• Overheating Concerns:
  • Ensure the rack environment has sufficient cooling and airflow.
  • Verify that no cables or other obstructions are blocking the ventilation of the Mini-ITX systems within the tray.
  • Clean any dust accumulation from the Mini-ITX systems' fans and vents.

Specifications

Warranty Information

Supermicro products are manufactured to high-quality standards. For specific warranty terms and conditions applicable to the MCP-290-10108-0B Dual System Tray, please refer to the official Supermicro website or contact Supermicro customer support. Keep your proof of purchase for warranty claims.

Customer Support

If you encounter any issues or have questions regarding your Supermicro MCP-290-10108-0B Dual System Tray that are not covered in this manual, please visit the official Supermicro support website or contact their customer service department for assistance. Provide your product model number (MCP-290-10108-0B) and a detailed description of your inquiry for efficient support.

For the most up-to-date contact information, please visit: www.supermicro.com/support