Kendal All in One Foot Spa Bath Massager FBD18 Instruction Manual

Important Safety Instructions

Please read all instructions carefully before using your Kendal Foot Spa Bath Massager. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always ensure the unit is unplugged before filling or emptying water.
• Do not operate the foot spa without water.
• Keep the power cord away from heated surfaces.
• Do not use if the unit or power cord is damaged.
• Avoid placing feet too close to the water outlet during heating, as the temperature near the outlet can be high.
• This appliance is for household use only.
• Keep out of reach of children.
• Do not stand on the unit.
• If you have any medical conditions, consult a doctor before use.

Product Overview

Components

The Kendal Foot Spa Bath Massager FBD18 is designed for comfort and relaxation. Below are its main components:

Image: Diagram showing the labeled components of the Kendal Foot Spa, including the control panel, air nozzles, heating area, stimulus nodes, rollers, red light, and rubber feet.

Key Features

• All-in-One Functionality: Combines heating therapy, O2 bubble massage, and digital controls.
• Digital Temperature Control: Uses a quality PTC heating semiconductor to adjust and maintain water temperature between approximately 95°F (35°C) and 118°F (48°C).
• Timer Function: Allows setting a massage duration for convenience.
• Massage Rollers: Features two active rollers for targeted foot massage, which can be removed.
• Durable Construction: Made from high-quality, temperature-resistant plastic with secure multi-insulation protection.
• Safety Features: Includes electric leakage protection and UL listing for safety.

Image: A top-down view of the Kendal Foot Spa, showing the digital display, control buttons, and bubbling water inside the basin.

Setup

Unfolding the Foot Spa

1. Place the folded foot spa on a flat, stable surface.
2. Gently press down on the center of the base while pulling up on the sides to expand the basin. Ensure all sides are fully extended and locked into place.

Filling with Water

• Ensure the unit is unplugged before adding water.
• Fill the foot spa with warm water up to the 'MAX' water level line indicated inside the basin. Using warm water initially will help the unit reach your desired temperature faster.
• Do not overfill to prevent splashing during operation.

Image: A hand pressing the power button on the digital control panel of the Kendal Foot Spa, illustrating the ease of interaction.

Operating Instructions

Power On/Off

• Plug the power cord into a standard 110V, 60Hz electrical outlet.
• Press the ON/OFF button on the control panel to turn the unit on. The digital display will illuminate.
• Press the ON/OFF button again to turn the unit off.

Temperature Control

• After powering on, press the TEMP+ or TEMP- buttons to adjust the desired water temperature. The temperature range is approximately 95°F (35°C) to 118°F (48°C).
• The red light will indicate that the heating element is active. Once the water reaches the preset temperature, the red light will automatically turn off.

Timer Function

• Press the TIMER button to set the desired duration for your foot spa session. The available time settings typically range from 10 to 60 minutes.

Massage Modes and Bubbles

• The foot spa features O2 bubbles for a relaxing sensation. Press the BUBBLE button to activate or deactivate the bubble function.
• The integrated rollers at the bottom provide a manual massage. Gently move your feet back and forth over the rollers to stimulate acupoints and relieve fatigue. These rollers can be removed if you prefer a flat surface.

Image: A person's feet are comfortably soaking in the Kendal Foot Spa, with visible bubbles and the red light indicating active heating.

Maintenance and Cleaning

• Draining: After each use, unplug the unit. Carefully lift the foot spa using the integrated handle and pour out the water.
• Cleaning: Wipe the interior and exterior of the unit with a soft, damp cloth. Do not use abrasive cleaners or harsh chemicals.
• Roller Removal: The massage rollers can be easily removed for cleaning or if you prefer not to use them during your foot spa session.
• Storage: Ensure the unit is completely dry before storing. The collapsible design allows for compact storage in small spaces.

Troubleshooting

• Unit does not power on: Ensure the power cord is securely plugged into a working electrical outlet. Check if the outlet has power.
• Water is not heating: Verify that the unit is powered on and the temperature is set above the current water temperature. Ensure there is sufficient water in the basin.
• No bubbles: Check if the bubble function is activated via the control panel. Ensure the water level is adequate.
• Unit shuts off unexpectedly: This may be a safety feature to prevent overheating. Unplug the unit, allow it to cool down, and check for any obstructions or issues before restarting.

Specifications

Image: A diagram illustrating the dimensions of the Kendal Foot Spa, showing its length, width, and height.

Warranty and Support

For warranty information and customer support, please refer to the documentation included with your product or contact Kendal customer service directly. Keep your purchase receipt for warranty claims.