Introduction
Thank you for choosing TRANYA M10B Wireless Sports Earbuds. This manual provides essential information to help you get the most out of your new earbuds, including setup, operation, maintenance, and troubleshooting tips. Please read it carefully before use.
What's in the Box
- TRANYA M10B Wireless Earbuds
- Charging Case
- 3 Pairs of Ear Tips (S, M, L)
- Type-C Charging Cable
Setup
1. Initial Charging
Before first use, fully charge the earbuds and the charging case. Place the earbuds into the charging case. Connect the Type-C charging cable to the charging case and a power source. The LED indicators on the case will show the charging status.
Image: TRANYA M10B charging case connected via Type-C cable, showing the charging port.
A 10-minute charge provides approximately 2 hours of playback. A full charge of the earbuds offers up to 7 hours of playback, and the charging case extends total playtime to 35 hours.
Image: Illustration showing the TRANYA M10B earbuds and charging case, highlighting 7 hours of single charge playtime and 35 hours total with the case.
2. Pairing with Your Device
- Open the charging case. The earbuds will automatically enter pairing mode.
- On your device (smartphone, tablet, computer), enable Bluetooth.
- Search for "TRANYA M10B" in the list of available Bluetooth devices.
- Select "TRANYA M10B" to connect. Once connected, you will hear an audible confirmation.
Image: A smartphone screen displaying Bluetooth settings, showing 'Tranya M10' as a connected device, with the earbuds nearby.
Operating Instructions
Button Controls
The TRANYA M10B earbuds feature physical buttons for precise control over your audio and calls. This design prevents accidental touches during active use.
Image: Diagram of a TRANYA M10B earbud highlighting the button control area with icons for Play/Pause, Volume/Call Control, Voice Assistant, and Power On/Off.
- Play/Pause: Press once on either earbud.
- Previous Track: Press and hold the left earbud for 2 seconds.
- Next Track: Press and hold the right earbud for 2 seconds.
- Volume Up: Press the right earbud twice.
- Volume Down: Press the left earbud twice.
- Answer/End a Call: Press once on either earbud.
- Reject a Call: Press and hold either earbud for 1 second.
- Activate Voice Assistant: Press either earbud three times.
- Switch EQ Mode (Normal/Bass Boosted): Press either earbud five times.
Call Functionality
The earbuds are equipped with a 4-microphone design to ensure clear call quality, even in noisy environments.
Image: Diagram showing two TRANYA M10B earbuds with four microphone locations (MIC 1, MIC 2, MIC 3, MIC 4) highlighted for enhanced call clarity.
Dual EQ Settings
The M10B features dual EQ settings, allowing you to switch between two sound profiles:
- Bass Boost Mode: Provides a warmer, deeper bass sound.
- Normal Mode: Offers brighter mids and highs for a balanced audio experience.
To switch modes, press either earbud five times.
Maintenance
Cleaning
Regularly clean your earbuds and charging case to ensure optimal performance and hygiene. Use a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents.
IPX5 Water Resistance
The earbuds feature an IPX5 water-resistant rating, meaning they are protected against low-pressure water jets from any direction. This makes them suitable for exercise and sports activities where sweat or light rain may occur. They are not designed for submersion in water.
Image: Two TRANYA M10B earbuds covered in water droplets, illustrating their IPX5 water resistance.
Storage
When not in use, store the earbuds in their charging case to protect them and keep them charged. The magnetic attraction in the case ensures secure placement.
Troubleshooting
- Earbuds not pairing: Ensure both earbuds are charged and in pairing mode. Turn off and on your device's Bluetooth, then try pairing again.
- Only one earbud working: Place both earbuds back into the charging case, close the lid, then open it again. This often resets the connection between them.
- No sound: Check the volume level on both your device and the earbuds. Ensure the earbuds are correctly paired and selected as the audio output.
- Charging issues: Verify the charging cable is securely connected to both the case and the power source. Clean the charging contacts on the earbuds and inside the case.
- Poor call quality: Ensure the microphones are not obstructed. Try moving to an area with less background noise.
If issues persist, refer to the official TRANYA support website for further assistance.
Specifications
Image: Detailed diagram illustrating the 14.2mm dynamic driver component within the TRANYA M10B earbud.
| Feature | Detail |
|---|---|
| Model Name | M10B |
| Connectivity Technology | Wireless (Bluetooth 5.0) |
| Audio Driver Type | Dynamic Driver (14.2mm) |
| Playtime (Single Charge) | Up to 7 hours |
| Total Playtime (with Charging Case) | Up to 35 hours |
| Microphones | 4 (for clear calls) |
| Water Resistance Level | IPX5 |
| Control Type | Button Control |
| Bluetooth Range | 10 Meters |
| Dimensions | 3.23 x 2.09 x 1.18 inches |
| Item Weight | 6.3 ounces |
Product Overview Video
Video: An official overview of the TRANYA M10B Wireless Sports Earbuds, demonstrating their features and design.
Warranty and Support
For detailed warranty information and customer support, please visit the official TRANYA website or contact their customer service. Keep your purchase receipt for warranty claims.
Manufacturer: Tranya
