Introduction
Welcome to your EverBrite 2-in-1 Mini LED Lantern and Flashlight. This versatile device combines the functionality of a powerful flashlight with a convenient area lantern, designed for portability and ease of use in various situations. This manual will guide you through its features, setup, operation, and maintenance to ensure optimal performance.
Product Features
- 2-in-1 Design: Telescopes from a compact flashlight to an extended lantern.
- Compact & Lightweight: Measures approximately 4 inches tall (compact) with a 1.5-inch diameter and weighs 2.29 ounces (65g), making it highly portable.
- 3 Lighting Modes: Features High, Low, and Strobe modes, easily selectable via the ON/OFF button.
- Zoomable Flashlight: Adjustable beam focus for close-range floodlight or long-range spotlight (up to 99ft/30m) by twisting the flashlight head.
- Removable Hook: Includes a convenient hook for hanging the lantern in tents, on branches, or other suitable locations.
- Power Source: Each unit operates on 3 x AAA Alkaline batteries (6 AAA batteries included for a 2-pack).
- Durable Construction: Made from matte plastic.
- Brightness: Provides 60 lumens of light output.
Setup
Battery Installation
Your EverBrite 2-in-1 Mini LED Lantern and Flashlight requires 3 AAA batteries per unit. These are included with your purchase.
- Unscrew the bottom cap of the device.
- Insert 3 AAA batteries into the battery holder, ensuring correct polarity (+/-) as indicated inside the compartment.
- Screw the bottom cap back on securely.
Detailed view of the EverBrite 2-in-1 Mini Lantern and Flashlight, highlighting the battery holder, power button, and the distinction between the flashlight and lantern sections. Batteries are pre-installed but require a small paper tab removal for first use.
Operating Instructions
Power On/Off and Mode Selection
The device features a rubberized ON/OFF button located at the base. Press the button to cycle through the lighting modes:
- First Press: High mode (brightest setting).
- Second Press: Low mode (dimmer setting).
- Third Press: Strobe mode (flashing light).
- Fourth Press: Turns the device off.
This image demonstrates how to cycle through the three distinct lighting modes by repeatedly pressing the power button.
Flashlight Mode
To use the device as a traditional flashlight, ensure it is in its compact, unextended form. The light will emit a focused beam from the top lens.
Lantern Mode
To activate the lantern mode, gently pull the top section of the device upwards. This action extends the white diffuser, providing 360-degree area lighting suitable for illuminating a wider space.
This image illustrates the dual functionality, showing the device extended for broad area illumination as a lantern and compressed for a focused beam as a flashlight.
Zoom Function (Flashlight Mode Only)
When the device is in flashlight mode, you can adjust the beam's focus. Twist the orange ring at the top of the device to transition the light from a wide floodlight to a narrow, concentrated spotlight.
This visual guide demonstrates how to easily adjust the light beam from wide to narrow by twisting the top of the flashlight.
Official Product Video: EverBrite 2 Pack Mini Flashlight Lantern Set
This video provides a comprehensive demonstration of the EverBrite 2-in-1 Mini Flashlight Lantern Set, showcasing its compact design, the transition between flashlight and lantern modes, and the different light settings.
Maintenance
- Cleaning: Keep the device clean and dry. Wipe the exterior with a soft, damp cloth if necessary. Avoid using abrasive cleaners or solvents.
- Battery Care: Remove batteries if the device will not be used for an extended period (e.g., several months) to prevent potential battery leakage and damage to the unit.
- Storage: Store the lantern/flashlight in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | Dead or incorrectly installed batteries | Check battery polarity, replace with fresh AAA batteries. Ensure the protective tab (if any) has been removed. |
| Light is dim or flickers | Low battery power | Replace all 3 AAA batteries with fresh ones. |
| Cannot switch between modes | Button malfunction or low battery | Ensure batteries are fresh. Press the button firmly and deliberately. If the issue persists, contact customer support. |
| Flashlight beam is not adjustable | Mechanism obstruction or damage | Ensure no debris is obstructing the twisting mechanism. Avoid forcing the mechanism. |
Specifications
- Brand: EverBrite
- Model Number: E003006A
- Product Dimensions (Compact): 1.5"L x 1.5"W x 3.94"H
- Item Weight: 2.29 ounces (65 Grams)
- Light Source Type: Light Emitting Diode (LED)
- Brightness: 60 lumens
- Power Source: Battery Powered
- Battery Type: 3 x AAA Alkaline batteries (per unit)
- Batteries Included: Yes (6 AAA batteries for 2 units)
- Material: Matte Plastic
- Finish Type: Matte Plastic
- Water Resistance Level: Not Water Resistant
- Mounting Type: Tabletop Mount, Removable Hook
- UPC: 820909741800
This image provides a visual representation of the compact size of the EverBrite device, comparing it to a standard smartphone and detailing its dimensions in both compact and extended forms.
Warranty and Support
For warranty information or technical support regarding your EverBrite 2-in-1 Mini LED Lantern and Flashlight, please refer to the product packaging or contact EverBrite customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.
