Bush Business Furniture Move 60 Series 48-inch Electric Height Adjustable Standing Desk

Introduction

This manual provides essential information for the assembly, operation, and maintenance of your Bush Business Furniture Move 60 Series 48-inch Electric Height Adjustable Standing Desk. Designed for ergonomic comfort and productivity, this sit-stand desk allows for seamless transitions between sitting and standing positions throughout your workday. Please read these instructions carefully before use to ensure proper setup and safe operation.

Safety Information

To ensure safe operation and prevent injury or damage to the product, please observe the following:

• Ensure the desk is properly assembled according to the provided instructions.
• Do not exceed the maximum weight capacity of 200 pounds.
• Exercise caution when adjusting the desk height to avoid pinching or crushing hazards. Keep hands and objects clear of moving parts.
• Do not allow children to operate the desk without adult supervision.
• Ensure the power cord is properly connected to a standard outlet and is not damaged or frayed.
• Avoid placing liquids directly on the control panel or near electrical components.

Package Contents

Verify that all components are present before beginning assembly. Refer to the packing list included with your desk for a detailed inventory. The package typically includes:

• Desktop surface (Mocha Cherry)
• Electric height-adjustable base (Silver Base)
• Control panel with digital display
• Assembly hardware and tools
• Instruction manual

Assembly Instructions

Assembly of the Bush Business Furniture Move 60 Series desk is designed to be straightforward. All pieces and hardware are clearly labeled to facilitate the process. Typically, assembly takes approximately one hour. For detailed, step-by-step instructions, please refer to the dedicated assembly guide included in your package.

Key Assembly Points:

• Follow the numerical sequence for attaching components.
• Ensure all screws and fasteners are tightened securely.
• Connect the motor and control panel cables as indicated in the assembly guide.

Setup

After assembly, position your desk in the desired location, ensuring it is on a stable, level surface. Connect the power cord to a standard electrical outlet.

Cable Management

The desk features integrated wire management grommets to help keep your workspace tidy and organized. These grommets allow you to route power and data cables neatly through the desktop, reducing clutter.

Image: Close-up view of the wire management grommet, showing a cable routed through it for an organized desktop.

Operating Instructions

Your Move 60 Series desk features an electric height adjustment system for effortless transitions between sitting and standing.

Height Adjustment

The desk can be adjusted from a minimum height of 27 inches to a maximum height of 46.7 inches. Use the control panel located on the front edge of the desk to operate the height adjustment.

Image: A detailed view of the control panel, showing the digital display and control buttons for height adjustment.

• To Raise: Press and hold the 'Up' arrow button on the control panel.
• To Lower: Press and hold the 'Down' arrow button on the control panel.
• The digital display will show the current height of the desk in inches.

Preset Heights

The control panel allows you to save up to two preferred sitting and standing heights for quick and convenient adjustment.

• To Set a Preset: Adjust the desk to your desired height. Press the 'M' button, then press a number button (e.g., '1' or '2') within 3 seconds. The height is now saved to that preset.
• To Use a Preset: Simply press the corresponding number button (e.g., '1' or '2'), and the desk will automatically move to the saved height.

Anti-Collision Sensor

The desk is equipped with an anti-collision sensor that automatically stops movement if an obstruction is detected during height adjustment, preventing damage to the desk or objects in its path.

Image: An annotated diagram highlighting the desk's features, including the control panel, wire management grommet, anti-collision sensor, durable desktop, and welded steel base.

Product Video

Video: Official product video showcasing the Bush Business Furniture Move 60 Collection, demonstrating the smooth electric height adjustment and various features of the desk.

Maintenance

To maintain the appearance and functionality of your desk:

• Cleaning: Wipe the desktop surface with a damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the thermally fused laminate finish.
• Inspection: Periodically check all fasteners and connections to ensure they remain tight.
• Cable Care: Ensure cables are not pinched or tangled, especially during height adjustments.

Troubleshooting

If you encounter any issues with your electric height adjustable desk, please refer to the following general troubleshooting tips:

• Desk Not Moving: Check that the power cord is securely plugged into both the desk and the wall outlet. Ensure no objects are obstructing the desk's movement.
• Uneven Movement: If the desk moves unevenly, ensure all leg components are properly assembled and tightened.
• Control Panel Unresponsive: Try unplugging the desk from the power source for 30 seconds and then plugging it back in to reset the system.

For persistent issues, please contact customer support.

Specifications

Image: A technical drawing displaying the precise dimensions of the desk, including height, width, and depth.

Warranty and Support

Your Bush Business Furniture Move 60 Series Electric Height Adjustable Standing Desk is backed by a 5 Year Manufacturer's Warranty. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or any questions regarding your product, please contact Bush Business Furniture customer service. Refer to the contact information provided in your original product packaging or visit the official Bush Business Furniture website.