UPBRIGHT 9V AC/DC Adapter

UpBright 9V AC/DC Adapter User Manual

Brand: UPBRIGHT | Model: 9V AC/DC Adapter (Compatible with OttLite GX7911)

1. Introduction

This manual provides essential information for the safe and effective use of your UpBright 9V AC/DC Adapter. This power supply is designed to provide reliable power to compatible devices, specifically the OttLite GX7911 Rechargeable Task Lamp and similar 9VDC 1000mA devices.

The adapter features global input voltage compatibility (100-240VAC 50/60Hz) and includes built-in safety protections such as Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP) to ensure the safety of your devices.

UpBright 9V AC/DC Adapter with power cord and barrel connector

Image: The UpBright 9V AC/DC Adapter, showing the main unit with a standard US plug and the attached power cord terminating in a barrel connector.

Compatibility Note: This adapter is specifically designed for devices requiring 9V DC input with a current draw of up to 1000mA (1A). It is compatible with OttLite GX7911 Rechargeable Task Lamp, Ott Lite Battery Powered Task Lamp 13W Bulb Cordless Tattoo Light, and Folding Task Lamp 13W White Full Spectrum Balanced Light. Important: This adapter is NOT compatible with 4.5V, 5V, 12V, or 13.2V versions of devices. Please verify your device's voltage requirements before use.

2. Setup

Verify Compatibility: Before connecting, ensure your device requires a 9V DC power input and a current of 1A or less. Check your device's specifications or original power adapter.
Connect to Device: Insert the barrel connector of the UpBright adapter firmly into the power input port of your compatible device (e.g., OttLite GX7911).
Connect to Power Outlet: Plug the AC prongs of the adapter into a standard wall power outlet (100-240VAC).
Power On: Once connected, your device should receive power. If it's a rechargeable device, it will begin charging.

UpBright 9V AC/DC Adapter showing the barrel connector end

Image: A close-up view of the UpBright AC/DC adapter, highlighting the barrel connector that plugs into the device.

3. Operating Instructions

The UpBright 9V AC/DC Adapter operates automatically once connected to a power source and a compatible device. It provides a stable 9V DC output to power or charge your equipment.

Ensure the adapter is placed in a well-ventilated area to prevent overheating.
Do not cover the adapter during operation.
Disconnect the adapter from the wall outlet when not in use for extended periods.
Always unplug the adapter by grasping the plug, not the cord.

4. Maintenance

Proper maintenance ensures the longevity and safe operation of your AC/DC adapter.

Cleaning: Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
Storage: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly winding the cord, which can cause damage over time.
Inspection: Periodically inspect the adapter and its cord for any signs of damage, such as frayed wires, bent prongs, or cracks in the casing. If damage is found, discontinue use immediately and replace the adapter.

5. Troubleshooting

If you encounter issues with your UpBright AC/DC Adapter, refer to the following common troubleshooting steps:

Problem	Possible Cause	Solution
Device not powering on/charging.	Incorrect voltage/current compatibility. Loose connection. Faulty power outlet. Damaged adapter/cord.	Verify your device requires 9V DC and 1A or less. Ensure the barrel connector is fully inserted into the device and the AC plug is firmly in the wall outlet. Test the power outlet with another working appliance. Inspect the adapter and cord for visible damage. If damaged, replace it.
Adapter feels hot.	Normal operation (slight warmth). Overload or poor ventilation.	A slight warmth is normal. Ensure the adapter is not covered and has adequate airflow. Disconnect if excessively hot and allow to cool. If it consistently overheats, discontinue use.

6. Specifications

Feature	Detail
Brand	UPBRIGHT
Input Voltage	100-240VAC, 50/60Hz
Output Voltage	9V DC
Output Current	1000mA (1A)
Connector Type	Barrel Connector
Special Features	OVP, OCP, SCP Protection (Over Voltage, Over Current, Short Circuit Protection)
Included Components	1 x AC Adapter (Note: Product listing mentions "2 x AC Adapter" but this manual refers to a single unit for clarity.)

7. Warranty Information

UpBright products are designed for reliability and performance. This adapter comes with the following warranty:

Refund Policy: 30 days refund period from the date of purchase.
Exchange Policy: 24 months exchange period for defective units.

Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects and issues arising from normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or incorrect voltage application.

UpBright Limited Warranty Certificate and Gold Seal

Image: A visual representation of the UpBright Limited Warranty Certificate alongside a gold product warranty seal, indicating product assurance.

8. Customer Support

For further assistance, inquiries, or warranty claims, please contact UpBright customer support or visit our official store.

UPBRIGHT Store: Visit the UPBRIGHT Store on Amazon

Please have your product model and purchase details ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.