Introduction
This manual provides essential instructions for the safe installation, operation, and maintenance of your ARIEL 59-inch Triangular Platinum Whirlpool Bathtub (Model PW1685959CW1). Please read all instructions carefully before installation and use to ensure proper function and to prevent injury or damage.
Important Safety Information
- Electrical Safety: All electrical connections must be performed by a qualified electrician in accordance with local and national electrical codes. Ensure the bathtub is properly grounded. Do not operate if the power cord or plug is damaged.
- Water Temperature: Test water temperature before entering the bathtub. Prolonged immersion in water hotter than 104°F (40°C) can be hazardous to your health.
- Chemicals: Use only recommended cleaning agents. Avoid abrasive cleaners or solvents that may damage the acrylic surface or fixtures.
- Children and Pets: Never leave children or pets unattended near the bathtub.
- Medical Conditions: Consult a physician before use if you have any medical conditions, are pregnant, or are elderly.
- Installation: Ensure the bathtub is installed on a structurally sound and level surface capable of supporting its weight when filled with water and occupants.
Package Contents
Verify that all components are present and undamaged before proceeding with installation.
- ARIEL 59-inch Triangular Whirlpool Bathtub
- Pre-installed Chrome Waterfall Faucet
- Handheld Showerhead
- Air Regulator Valve
- Hot and Cold Water Inlets
- Drain System (pre-installed)
- User Manual (this document)
Installation Instructions
Professional installation by a licensed plumber and electrician is highly recommended to ensure compliance with all local building and safety codes.
- Site Preparation: Ensure the installation area is level, clean, and has adequate structural support for the bathtub's weight when filled. Verify access to water supply lines (hot and cold), drainage, and electrical connections.
- Positioning: Carefully move the bathtub into its desired corner position. The triangular design is optimized for corner placement.
- Water Connections: Connect the hot and cold water supply lines to the pre-installed inlets on the bathtub. Use appropriate plumbing fittings and sealants to prevent leaks.
- Drainage Connection: Connect the bathtub's drain system to your household drainage. Ensure a watertight seal and proper slope for efficient draining.
- Electrical Connection: A dedicated electrical circuit with appropriate voltage and amperage is required. Connect the bathtub's electrical wiring to a GFCI-protected circuit breaker, following all local electrical codes. This step must be performed by a qualified electrician.
- Leak Test: Fill the bathtub with water and inspect all connections for leaks. Operate the jets and waterfall to ensure proper function and check for any leaks during operation.
- Final Placement: Once all connections are secure and tested, finalize the bathtub's position.
Image: The ARIEL triangular whirlpool bathtub seamlessly integrated into a modern bathroom setting, demonstrating its corner-fit design.
Operation
Familiarize yourself with the controls before your first use.
Control Panel
The bathtub features an intuitive control panel for managing various functions. Refer to the specific icons on your panel for detailed operation.
Image: A detailed view of the bathtub's digital control panel and the attached handheld showerhead, showing the user interface.
Filling the Bathtub
Ensure the drain is closed. Use the hot and cold water inlets to fill the bathtub to the desired level. The water level should be above the highest jets before activating any jet functions.
Image: The ARIEL whirlpool bathtub filled with water, showing the active hydro jets creating bubbles and the waterfall feature in operation.
Hydrotherapy Jets
Your bathtub is equipped with 22 hydrotherapy jets, including whirlpool, bottom, and back acupuncture jets. To activate the jets, press the designated button on the control panel. The integrated air regulator valve allows you to adjust the intensity of the jet massage.
Image: An aerial perspective of the bathtub's interior, highlighting the precise placement of the 22 hydrotherapy jets for comprehensive massage.
Waterfall Faucet
The built-in waterfall faucet provides a soothing cascade of water. Activate it using the corresponding control on the panel. Ensure the water supply is open.
Image: A close-up shot of the elegant waterfall faucet, showing water flowing smoothly into the bathtub.
Handheld Showerhead
The handheld showerhead offers flexibility for rinsing or targeted water flow. To use, lift the showerhead from its holder and activate it via the control panel or diverter valve.
Temperature Control
Adjust the hot and cold water supply to achieve your desired bathing temperature. The bathtub's system is designed to maintain the set temperature during operation.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your ARIEL bathtub.
- Cleaning the Surface: Clean the acrylic surface with a soft cloth and a non-abrasive, mild bathroom cleaner. Rinse thoroughly with water after cleaning. Avoid harsh chemicals, abrasive pads, or solvents.
- Jet Cleaning: Periodically fill the tub with warm water and add a small amount of whirlpool system cleaner or white vinegar. Run the jets for 10-15 minutes, then drain and rinse.
- Fixture Care: Clean chrome fixtures with a soft cloth and mild soap and water. Do not use abrasive cleaners, as they can damage the finish.
- Draining: Always ensure the bathtub is completely drained after each use to prevent stagnant water and residue buildup.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Jets not working | Insufficient water level; power supply issue; clogged jets. | Ensure water level is above jets. Check power connection and GFCI. Clean jets as per maintenance section. |
| No water flow from faucet/showerhead | Water supply valves closed; clogged aerator. | Check if hot/cold water supply valves are fully open. Clean or replace aerator. |
| Water not draining | Drain stopper closed; drain clogged. | Ensure drain stopper is open. Clear any obstructions from the drain. |
| Unusual noise during operation | Debris in pump; loose connections. | Turn off power immediately. Contact a qualified technician for inspection. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact ARIEL customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | ARIEL |
| Model Number | PW1685959CW1 |
| Product Dimensions | 59.6"L x 59.6"W x 32.9"H |
| Material | Fiberglass Reinforced Acrylic |
| Color | White |
| Shape | Triangular |
| Capacity | 119 Gallons |
| Installation Type | Freestanding (Alcove compatible) |
| Jets | 22 Hydrotherapy Jets (4 whirlpool, 8 bottom, 10 back acupuncture) |
| Water Pump | 1.5 HP |
| Faucet Type | Waterfall, Chrome Finish |
| Special Features | Handheld Showerhead, Air Regulator, Hot/Cold Inlets |
| Wattage | 2600 watts |
| UPC | 843012101897 |
Warranty and Support
For warranty information, technical assistance, or to order replacement parts, please contact ARIEL customer support. Keep your purchase receipt and model number (PW1685959CW1) readily available when contacting support.
Contact Information: Refer to the ARIEL official website or your purchase documentation for the most current contact details.
