Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Grandeur Carre' Tall Plate Fifth Avenue Left-Handed Privacy Knob. Please read these instructions carefully before beginning installation to ensure proper function and longevity of your product. Retain this manual for future reference.
Product Overview
The Grandeur Carre' Tall Plate Fifth Avenue Knob is designed for interior doors requiring a privacy function. It features a tall plate design, suitable for doors 84 inches or higher, and a classic Fifth Avenue knob. This specific model is a left-handed privacy knob with a 2.375-inch backset and a timeless bronze finish.
A close-up view of the Grandeur Carre' Tall Plate Fifth Avenue Knob, featuring a timeless bronze finish. The tall rectangular plate has a classic stepped edge design, and the round knob is positioned towards the bottom of the plate.
Safety Information
- Always wear appropriate personal protective equipment, such as safety glasses, during installation.
- Keep small components out of reach of children to prevent choking hazards.
- Use only the tools specified in the installation instructions.
- Ensure the door is securely supported if removed from its hinges during installation.
Package Contents
Verify that all components are present before beginning installation:
- Door knob and chosen tall plate for both sides of door
- Latch mechanism
- Privacy spindle
- Privacy pin
- Strike plate
- Mounting screws
- Drilling template (if applicable)
Installation
Installation requires basic hand tools such as a screwdriver, measuring tape, and possibly a drill. A drilling template is included for new door preparations.
- Prepare the Door: If installing on a new door, use the provided drilling template to mark and drill holes for the latch mechanism and the knob assembly. Ensure the backset (distance from the door edge to the center of the knob hole) is 2.375 inches.
- Install the Latch Mechanism: Insert the latch mechanism into the edge of the door. Secure it with the provided screws. Ensure the latch bolt faces the correct direction for the door swing.
- Determine Handedness: This is a left-handed privacy knob. If the hinges are located on the left side of the door when viewed from the side where the knob will be installed, then this left-handed knob is correct. The privacy pin will be located on the right side of the knob when installed.
- Assemble the Knob: Insert the privacy spindle through the latch mechanism. Attach the exterior knob and tall plate assembly, ensuring the spindle engages properly.
- Install Interior Knob: Place the interior knob and tall plate assembly over the spindle and secure it to the exterior assembly using the mounting screws. Tighten screws evenly to prevent misalignment.
- Install Strike Plate: On the door frame, mark and chisel out an area for the strike plate. Secure the strike plate with screws, ensuring the latch bolt engages smoothly.
Operation
To operate the privacy knob:
- Locking: From the interior side, press the privacy pin located on the knob's base. This will prevent the exterior knob from turning.
- Unlocking: Turn the interior knob to retract the latch bolt and unlock the door. In an emergency, the privacy function can be disengaged from the exterior side using a small tool inserted into the emergency release hole.
- Opening: Turn either the interior or exterior knob to retract the latch bolt and open the door.
Maintenance
To maintain the appearance and function of your Grandeur door knob:
- Cleaning: Clean the knob and plate with a soft, damp cloth. Avoid abrasive cleaners, solvents, or polishing agents, as these can damage the finish.
- Lubrication: Periodically apply a small amount of silicone-based lubricant to the latch mechanism to ensure smooth operation. Do not use oil-based lubricants.
- Inspection: Regularly check all screws and connections for tightness. Tighten as necessary to prevent wobbling or misalignment.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Knob is loose or wobbly | Mounting screws are loose. | Tighten the mounting screws on the interior side of the knob. |
| Latch does not retract smoothly | Latch mechanism is dry or obstructed. | Apply silicone-based lubricant to the latch bolt. Check for debris in the latch bore. |
| Privacy function does not engage/disengage | Privacy pin or spindle misalignment. | Ensure the privacy spindle is correctly seated. Re-check handedness during installation. |
| Door does not latch properly | Strike plate misalignment or incorrect installation. | Adjust the strike plate position on the door frame. Ensure the latch bolt fully extends into the strike plate hole. |
Specifications
- Model Number: 837256
- Brand: Grandeur
- Product Type: Privacy Door Knob with Tall Plate
- Finish: Timeless Bronze
- Material: Solid Forged Brass
- Backset: 2.375 inches
- Handing: Left-Handed
- Plate Dimensions: Approximately 2.66 x 11 inches
- Item Weight: Approximately 5.75 pounds
- Special Features: Easy to Install, Keyless Privacy Function
Warranty and Support
This Grandeur product is covered by a Lifetime Warranty against defects in material and workmanship. For warranty claims or technical support, please contact Grandeur customer service. Keep your proof of purchase for warranty validation.
For further assistance, please visit the official Grandeur website or contact their customer support directly.
